Introduction
Thank you for choosing the WOLTU BTS26sz Height Adjustable Coffee Table. This manual provides essential information for the safe assembly, operation, and maintenance of your new furniture. Please read these instructions carefully before use and retain them for future reference.
The WOLTU BTS26sz coffee table features a versatile lift-top design with a gas lift mechanism, allowing the tabletop to be easily raised for use as a temporary workspace or dining surface. It includes both hidden and open storage compartments to help keep your living space organized. Constructed from high-quality E1 particle board with a water-repellent melamine veneer, this table is designed for stability and durability. Assembly is straightforward with clearly illustrated instructions and numbered components.
Image: Key features of the WOLTU BTS26sz coffee table, including E1 Class Panels, tilting table legs, non-slip feet, and high ground clearance.
Safety Information
- Ensure all parts are present and undamaged before assembly. Do not use if any parts are missing or broken.
- Assemble the product on a soft, clean surface to prevent scratches.
- Do not overtighten screws during assembly to avoid damaging the material.
- Keep small parts and packaging materials away from children and pets to prevent choking hazards.
- Do not stand or sit on the table.
- Distribute weight evenly on the tabletop and within storage compartments. Do not exceed the maximum weight capacities.
- When lifting or lowering the tabletop, ensure hands and fingers are clear of the mechanism to prevent pinching.
- Regularly check all fasteners to ensure they remain tight.
Parts List
Please verify that all components are included before beginning assembly. Refer to the assembly diagram for specific part identification.
Image: Technical diagram illustrating the dimensions of the WOLTU BTS26sz coffee table, including height adjustments and storage compartment measurements.
Note: The actual number of small parts may vary slightly. If any parts are missing or damaged, please contact customer support.
Setup and Assembly
Assembly is required for this product. Follow the numbered steps provided in the included assembly instructions. It is recommended to have two people for assembly.
- Unpack Components: Carefully remove all parts from the packaging. Place them on a soft, clean surface (e.g., a carpet or blanket) to prevent scratches.
- Identify Parts: Match each component with the corresponding labels in the assembly diagram.
- Assemble Base Structure: Begin by attaching the legs to the main base frame using the provided screws and tools. Ensure all connections are secure but do not overtighten initially.
- Install Storage Compartments: Attach the side panels and internal dividers to form the storage areas.
- Attach Lift Mechanism: Secure the gas lift mechanism to the main body and the underside of the tabletop. Follow the specific instructions for aligning and fastening the mechanism.
- Attach Tabletop: Carefully place the tabletop onto the lift mechanism and secure it according to the instructions.
- Final Tightening: Once all parts are assembled, gently tighten all screws and fasteners to ensure stability. Do not force or overtighten.
For detailed visual guidance, refer to the illustrated assembly instructions included in your package.
Operating Instructions
Lift-Top Functionality
Image: Close-up of the WOLTU BTS26sz coffee table's lift-top mechanism, showing the gas lift for stable, quiet operation and the cutout handles for easy lifting.
- To Lift the Tabletop: Gently pull the tabletop upwards using the cutout handles. The gas lift mechanism will assist in a smooth and controlled ascent. Continue lifting until it reaches the desired height or its maximum extension (approximately 57 cm from the floor).
- To Lower the Tabletop: Apply gentle downward pressure on the tabletop while holding the cutout handles. The gas lift mechanism will allow for a controlled descent. Guide the tabletop back into its closed position (approximately 43 cm from the floor).
Caution: Keep hands and fingers clear of the lifting mechanism and edges of the tabletop during operation to avoid injury.
Storage Compartments
Image: WOLTU BTS26sz coffee table with its lift-top open, showcasing the large internal storage compartment filled with books, a laptop, and other items.
- Hidden Storage: The compartment under the lift-top is ideal for storing items you wish to keep out of sight, such as remote controls, magazines, or small electronics.
- Open Compartment: The open shelf provides easy access storage for blankets, books, or decorative items.
Ensure items placed in storage do not obstruct the lift mechanism when closing the tabletop.
Maintenance and Care
- Cleaning: Wipe the table surfaces with a soft, damp cloth. Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, as these can damage the melamine veneer.
- Spills: Clean up spills immediately to prevent staining or damage to the surface.
- Fasteners: Periodically check all screws and bolts to ensure they are tight. Retighten as necessary, but do not overtighten.
- Heat and Moisture: Avoid placing hot items directly on the surface. Use coasters for drinks to prevent water rings. Keep the table away from direct sunlight and heat sources to prevent warping or discoloration.
- Movement: When moving the table, lift it rather than dragging it to prevent damage to the legs and floor.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Table feels wobbly after assembly. | Screws or fasteners are not fully tightened. | Carefully check and tighten all screws and bolts. Ensure the table is on a level surface. |
| Lift-top mechanism is stiff or difficult to operate. | Mechanism may need lubrication or is obstructed. | Ensure no items are obstructing the mechanism. Apply a small amount of silicone-based lubricant to the moving parts of the gas lift if necessary. |
| Tabletop does not close flush. | Items in hidden storage are too tall or mechanism is misaligned. | Remove any obstructing items from the hidden compartment. Check the alignment of the lift mechanism and re-adjust if possible (refer to assembly instructions). |
| Surface scratches or marks. | Sharp objects or abrasive cleaning. | Use soft cloths for cleaning. Avoid dragging objects across the surface. Minor scratches may be concealed with furniture repair pens (not included). |
If you encounter issues not listed here or require further assistance, please contact WOLTU customer support.
Specifications
- Brand: WOLTU
- Model: BTS26sz
- Color: Black
- Material: Engineered Wood, Metal
- Overall Dimensions (L x W x H): 100 x 50 x 43 cm (lowered) / 100 x 50 x 57 cm (lifted)
- Interior Storage Dimensions (L x W x H): 65 x 46.5 x 19 cm
- Item Weight: 18.8 kg
- Maximum Weight Capacity: Total 50 kg (Tabletop: 30 kg, Storage Compartment: 20 kg)
- Frame Material: Engineered Wood
- Top Material Type: Engineered Wood with Melamine Veneer
- Care Instructions: Wipe with a damp cloth
- Recommended Uses: Reading, Temporary Workspace, Dining
- Shape: Rectangular
Warranty and Support
WOLTU products are designed for quality and durability. For information regarding warranty coverage, please refer to the documentation included with your purchase or visit the official WOLTU website.
If you require assistance with assembly, have questions about product functionality, or need to report a missing/damaged part, please contact WOLTU customer support. Contact details can typically be found on the WOLTU website or on your purchase invoice.
Online Support: Visit the WOLTU Store on Amazon