1. Introduction
Thank you for choosing the BONDIVIBES UFUC Pro V.2. This advanced sexual wellness device is engineered for durability and performance, offering customizable sensations for an enhanced experience. Constructed with high-grade MIG welded tensile steel, the UFUC Pro V.2 provides robust torque and stable operation. This manual provides essential information for safe and effective use, setup, operation, maintenance, and troubleshooting of your device. Please read it thoroughly before first use and retain it for future reference.
2. Safety Information
Your safety is paramount. Adhere to the following guidelines to prevent injury or damage to the device:
- Adult Use Only: This device is intended for adult use only. Keep out of reach of children.
- Power Supply: Use only the provided power adapter. Ensure the voltage matches your region's electrical supply (220-240V or 100-110V).
- Electrical Safety: Do not operate the device with wet hands or in wet environments. Disconnect from power before cleaning or maintenance.
- Lubrication: Always use a water-based lubricant with attachments to ensure smooth operation and prevent damage to materials.
- Attachments: Ensure all attachments are securely fastened using the Vac-u-lock connection before operation.
- Inspection: Before each use, inspect the device and power cord for any signs of damage. Do not use if damaged.
- Discomfort: Discontinue use immediately if you experience any pain, discomfort, or irritation.
- Cleaning: Clean the device and attachments thoroughly after each use as per the maintenance instructions.
- Storage: Store the device in a clean, dry place away from direct sunlight and extreme temperatures.
3. Product Overview
The BONDIVIBES UFUC Pro V.2 is designed for stability and versatility. Familiarize yourself with its main components:
- Main Frame: High-grade MIG welded tensile steel structure providing stability.
- Adjustable Arm: The component that moves back and forth, allowing for stroke length adjustment.
- Vac-u-lock Connection: Located at the end of the adjustable arm, designed for secure attachment of various accessories.
- Motor Housing: Contains the powerful 1/9th horsepower motor.
- Speed Control Dial: (Not explicitly visible in image, but implied by description) Used to adjust the RPM.
- Power Input Port: For connecting the power adapter.
4. Setup
Follow these steps to set up your UFUC Pro V.2 device:
- Unpacking: Carefully remove all components from the packaging. Verify that all parts are present and undamaged.
- Placement: Place the main frame on a stable, flat, and sturdy surface. Ensure there is sufficient space around the device for operation and movement.
- Assembly (if required): While the core unit is largely pre-assembled, ensure any adjustable components are securely tightened. Refer to any included quick-start guide for specific assembly steps if parts are detached for shipping.
- Power Connection: Connect the provided power adapter to the power input port on the device. Plug the power adapter into a suitable electrical outlet. Ensure the power outlet matches the device's voltage requirements (100-110V or 220-240V).
- Attachment Connection: Select your desired Vac-u-lock compatible attachment. Securely connect it to the Vac-u-lock connection point on the adjustable arm. Ensure it clicks or locks firmly into place to prevent detachment during use.
5. Operating Instructions
Operating the BONDIVIBES UFUC Pro V.2 is straightforward. Always begin with low settings and gradually increase intensity.
- Apply Lubricant: Apply a generous amount of water-based lubricant to the attachment before use.
- Power On: Locate the power switch or button (if present) and turn the device on.
- Adjust Stroke Length: The device features an adjustable stroke length from 3cm to 15cm (1.2 to 6 inches). To adjust, locate the stroke adjustment mechanism on the arm (typically a knob or lever) and set it to your preferred length. Ensure it is locked securely before operation.
- Adjust Speed (RPM): Use the speed control dial to set the desired RPM (revolutions per minute). The speed range is 0-240 RPM. Start at the lowest setting and slowly increase to find your preferred intensity. The device is designed to start slow and gradually increase intensity.
- Operation: Position yourself comfortably relative to the device and attachment. Allow the device to operate, adjusting speed and stroke length as desired during use.
- Power Off: When finished, turn the speed control dial to the minimum setting (0 RPM) and then turn off the power switch. Disconnect the device from the power outlet.
Note: The robust torque of the UFUC Pro V.2 makes it suitable for various applications, including anal play and use with large attachments. Always ensure the device remains stable during operation.
6. Maintenance and Cleaning
Proper maintenance ensures the longevity and hygiene of your device.
- Disconnect Power: Always unplug the device from the power outlet before cleaning.
- Clean Attachments: Remove any attachments. Clean them thoroughly with warm water and a mild, toy-safe soap. Rinse completely and allow to air dry.
- Clean Device Body: Wipe down the main frame and adjustable arm with a damp cloth. For stubborn spots, a small amount of mild soap can be used. Avoid getting water into the motor housing or electrical components.
- Drying: Ensure all parts are completely dry before reassembling or storing.
- Lubrication (Mechanical): Periodically check moving parts for smooth operation. If any squeaking or stiffness occurs, apply a small amount of silicone-based lubricant to the mechanical joints, avoiding electrical components.
- Storage: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. Keep it covered to prevent dust accumulation.
7. Troubleshooting
If you encounter issues with your UFUC Pro V.2, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on. | Not plugged in; power outlet issue; power adapter fault. | Ensure power cord is securely plugged into device and outlet. Test outlet with another device. Check power adapter for damage. |
| Motor runs, but arm does not move or moves weakly. | Attachment not properly secured; mechanical obstruction; motor issue. | Ensure attachment is correctly seated on Vac-u-lock. Check for any foreign objects obstructing the arm's movement. If problem persists, contact support. |
| Device makes unusual noises. | Lack of lubrication; loose components; internal motor issue. | Apply mechanical lubricant to moving joints. Check for any loose screws or parts. If noise persists or is severe, discontinue use and contact support. |
| Speed control is erratic. | Faulty speed dial; power fluctuation. | Ensure stable power supply. If issue continues, the speed dial may be faulty; contact support. |
If you experience a problem not listed here, or if the suggested solutions do not resolve the issue, please contact BONDIVIBES customer support for assistance.
8. Specifications
- Model: UFUC Pro V.2
- Construction Material: High-grade MIG welded tensile stainless steel
- Stroke Length: Adjustable from 3cm to 15cm (1.2 to 6 inches)
- Motor: 1/9th horsepower
- Torque: 40-in-lbs
- Speed Range: 0-240 RPM (Revolutions Per Minute)
- Connection Type: Vac-u-lock
- Dimensions (Installed): 29cm (Height) x 48cm (Length) x 32cm (Width)
- Net Weight: 15.3 kg
- Gross Weight: 16.7 kg
- Power Supply: 220-240V or 100-110V (region-dependent power pack included)
- Certifications: CE Certified, ROHS Compliant
- Color: Black
9. Warranty and Support
For warranty information, technical support, or any inquiries regarding your BONDIVIBES UFUC Pro V.2, please contact BONDIVIBES customer service directly. Refer to the product packaging or the official BONDIVIBES website for the most current contact details and warranty terms.
Manufacturer: bondivibes