Introduction
This manual provides essential information for the installation, operation, and maintenance of the QIQIBABA 1006801R Control Board. This printed circuit board is designed as a direct replacement for electric furnaces in the E7 and B6 series, specifically for single-stage electric heat systems. Proper installation and adherence to safety guidelines are crucial for optimal performance and safety.
Figure 1: Overview of the 1006801R Control Board.
Safety Information
Always prioritize safety when working with electrical components and heating systems. Failure to follow these safety instructions could result in property damage, serious injury, or death.
- Disconnect Power: Before attempting any installation, maintenance, or repair, ensure that all power to the furnace and associated systems is completely disconnected at the main circuit breaker or fuse box. Verify power is off using a voltage tester.
- Qualified Personnel: Installation and servicing should only be performed by a qualified HVAC technician or a licensed electrician. Improper installation can lead to electrical shock, fire, or damage to the equipment.
- Static Discharge: Electronic components are sensitive to static electricity. Discharge any static electricity from your body before handling the control board by touching a grounded metal object. Consider wearing an anti-static wrist strap.
- Inspect Components: Before installation, visually inspect the new control board for any signs of damage. Do not install a damaged board.
- Follow Local Codes: All installations must comply with local and national electrical and building codes.
Compatibility
The 1006801R Control Board is designed for specific furnace and air handler models. Verify your existing unit's model number against the lists below to ensure compatibility.
- Compatible Brands: N0rdyne, Gibson, Frigidaire, Westinghouse, Philco, Tappan, Interthem, Miller, and other N0rdyne furnaces.
- Replaces OE Part Numbers: 1006801R, 1006800/1.
For E7 Series Furnace Models:
This single-stage circuit board fits furnace & air handler models E7 and FSHE. Compatible with models ending in -010, -012, -015, -017, -020, -023.
- E7EM Series: E7EM-010H1, E7EM-012H1, E7EM-015H1, E7EM-017H1, E7EM-020H1, E7EM-023H1
- E7ED Series: E7ED-010H1, E7ED-012H1, E7ED-015H1, E7ED-017H1, E7ED-020H1, E7ED-023H1
- E7EU Series: E7EU-010H1, E7EU-012H1, E7EU-015H1, E7EU-017H1, E7EU-020H1, E7EU-023H1
Figure 2: Detailed compatibility for E7 and B6 series models.
For B6 Series Furnace Models:
Also suitable for the following B6 Series Air Handlers:
- B6BMM0 Series Air Handler (B6BMM060K-C)
- B6BMMX Series Air Handler (B6BMMX60K-C)
- B6EMMX Series Air Handler (B6EMMX24K-A / B6EMMX24K-B / B6EMMX30K-A / B6EMMX30K-B / B6EMMX36K-B / B6EMMX42K-B / B6EMMX48K-C / B6EMMX60K-C)
Note: For B6BMMX Series Air Handler, use on units produced on or before 12/31/2017.
Setup and Installation
The installation of a furnace control board requires careful attention to detail and electrical safety. It is highly recommended that this procedure be performed by a certified HVAC technician.
- Power Disconnection: Turn off all electrical power to the furnace unit at the main service panel. Confirm power is off using a non-contact voltage tester.
- Access the Control Board: Locate and open the furnace access panel to expose the existing control board.
- Document Wiring: Before disconnecting any wires, take clear photographs of the existing wiring connections. Label each wire and its corresponding terminal on the old board. This step is critical for correct re-installation.
- Disconnect Wires: Carefully disconnect all wires from the old control board.
- Remove Old Board: Unmount the old control board from its housing. Note how it was secured (screws, clips, etc.).
- Install New Board: Mount the new 1006801R Control Board in the same position as the old one. Ensure it is securely fastened.
- Connect Wiring: Refer to your photographs and labels to connect each wire to its correct terminal on the new board. Double-check all connections for tightness and accuracy.
- Close Access Panel: Once all connections are secure and verified, close and secure the furnace access panel.
- Restore Power: Turn on the electrical power to the furnace unit at the main service panel.
- Test Operation: Initiate a heating cycle to verify that the furnace operates correctly and the new control board is functioning as expected. Listen for unusual noises and observe the furnace's behavior.
Figure 3: Detailed view of the control board, showing various connectors and components.
Operating Principles
The 1006801R Control Board is designed to manage the operations of single-stage electric furnaces and air handlers. It acts as the central processing unit, receiving signals from the thermostat and other sensors to control the heating elements, blower motor, and other furnace functions.
- Thermostat Communication: The board interprets signals from your thermostat to determine when to activate or deactivate the heating cycle.
- Blower Control: It manages the operation of the furnace's blower motor, ensuring proper airflow for heating and cooling (if applicable).
- Safety Features: The board incorporates safety circuits that monitor furnace operation and will shut down the system if unsafe conditions (e.g., overheating) are detected.
- Diagnostic Indicators: Some control boards include LED diagnostic lights that can help identify system faults. Refer to your furnace's specific manual for interpreting these codes.
Maintenance
The 1006801R Control Board itself requires no routine maintenance. However, regular maintenance of your furnace system is essential for its longevity and efficient operation.
- Annual Professional Inspection: Have your furnace system inspected and serviced annually by a qualified HVAC technician. This includes checking electrical connections, cleaning components, and verifying proper operation.
- Air Filter Replacement: Regularly replace or clean your furnace's air filter according to the manufacturer's recommendations (typically every 1-3 months). A dirty filter restricts airflow, which can strain the furnace and potentially affect the control board.
- Keep Area Clear: Ensure the area around your furnace is clear of obstructions and combustible materials to allow for proper airflow and prevent fire hazards.
Troubleshooting
If your furnace is not operating correctly after installing the 1006801R Control Board, consider the following common troubleshooting steps. For complex issues, consult a qualified technician.
| Problem | Possible Cause | Solution |
|---|---|---|
| Furnace not turning on | No power to the unit; thermostat setting incorrect; loose wiring connection; tripped circuit breaker. | Check circuit breaker; ensure thermostat is set to heat and fan is on auto; verify all wiring connections on the control board are secure. |
| Blower not operating | Blower motor issue; control board fault; thermostat fan setting. | Check thermostat fan setting (try "On" instead of "Auto"); inspect blower motor for obstructions; if problem persists, professional diagnosis is needed. |
| Furnace cycles on and off rapidly (short cycling) | Restricted airflow (dirty filter); overheating; faulty sensor. | Replace air filter; ensure vents are open; check for obstructions around the furnace. If the issue continues, a technician should inspect for overheating or sensor problems. |
| Diagnostic LED codes on board | Indicates a specific system fault. | Refer to your furnace's original manual for the interpretation of specific LED flash codes. These codes pinpoint the exact issue. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | 1006801R |
| Manufacturer | QIQIBABA |
| Item Weight | 10.8 ounces |
| Product Dimensions | 5.9 x 7.4 x 1.57 inches |
| Included Components | 1006801R Control Board |
| Compatibility | E7 & B6 Series Electric Furnaces (Single Stage Electric Heat) |
| Replaces OE Part # | 1006801R, 1006800/1 |
Figure 4: The 1006801R Control Board is compatible with 12kW, 15kW, 17kW, 20kW, and 23kW electric furnaces.
Warranty and Support
The QIQIBABA 1006801R Control Board comes with a warranty to ensure customer satisfaction.
- Warranty Description: Free return and exchange within six months from the date of purchase.
- Customer Support: For technical assistance, warranty claims, or further inquiries, please contact QIQIBABA customer service through the retailer where the product was purchased.
