Sweet taize 5.0MP 3-in-1 USB Endoscope Inspection Camera User Manual

1. Introduction

Thank you for purchasing the Sweet taize 5.0MP 3-in-1 USB Endoscope Inspection Camera. This device is designed for detailed visual inspection in hard-to-reach areas, offering high-resolution imaging and versatile connectivity. Please read this manual thoroughly before use to ensure proper operation and longevity of your device.

2. Safety Information

• Do not use this device for medical purposes or direct human/animal examination. It is intended for industrial and household inspection only.
• Keep the device away from children.
• Ensure the probe is clean before and after each use, especially when inspecting sensitive areas.
• Do not attempt to disassemble or modify the device. This will void the warranty and may cause damage.
• While the probe is IP67 waterproof, avoid submerging the USB connector or control unit in water.
• Operate the device within its specified temperature and humidity ranges.

3. Package Contents

Verify that all items listed below are included in your package:

• 1x USB Endoscope Inspection Camera
• 1x User Manual (this document)
• Useful Accessories (Magnet, Mirror, Hook)

Image: The Sweet taize 5.0MP 3-in-1 USB Endoscope Inspection Camera, showing the camera probe, flexible cable, control unit, and interchangeable USB connectors (USB-A, Micro USB, USB-C).

Image: Close-up view of the included accessories: a magnet attachment for retrieving metallic objects, a mirror attachment for side viewing, and a hook attachment for pulling or retrieving non-metallic items.

4. Product Overview

The Sweet taize Endoscope Camera features a 5.0MP sensor for high-resolution images and videos, an autofocus function for clear viewing at various distances, and a flexible hard wire cable for navigating tight spaces. It connects via USB to compatible devices.

Key Features:

• 5.0 Megapixel Ultra HD Module: Provides 2594x1944P resolution for detailed inspection.
• Autofocus Technology: Automatically adjusts focus for clear images from various distances.
• 3-in-1 USB Connectivity: Compatible with cell phones (OTG function required) and computers via USB-A, Micro USB, and USB-C.
• IP67 Waterproof Probe: Allows for inspection in wet or submerged environments.
• Adjustable LED Lights: Integrated lights provide illumination in dark areas.
• 5-Meter Hard Wire Cable: Flexible yet rigid cable for extended reach and maneuverability.

5. Setup Instructions

5.1. Software Installation (for Android Phones and Computers)

For Android Phones:

1. Ensure your Android phone supports OTG (On-The-Go) functionality. You can check this in your phone's settings or by using an OTG checker app.
2. Download and install a compatible USB camera application from the Google Play Store. Recommended apps include "USB Camera", "OTG View", or "AN98".
3. Grant all necessary permissions to the installed application.

For Windows Computers:

1. Connect the endoscope to a USB port on your computer.
2. Open the built-in "Camera" application (Windows 10/11) or download a third-party camera software. The endoscope should be recognized as a webcam.
3. If the image does not appear, select the endoscope as the active camera device within the application settings.

For Mac Computers:

1. Connect the endoscope to a USB port on your Mac.
2. Open the "Photo Booth" application.
3. In Photo Booth, go to Camera in the menu bar and select the endoscope as the input source.

5.2. Connecting the Endoscope

1. Identify the correct USB connector for your device (USB-A for standard computers, Micro USB or USB-C for phones/tablets). The endoscope cable has a 3-in-1 design.
2. Plug the appropriate USB connector into your phone or computer.
3. Launch the installed camera application. The endoscope's image should now be visible on your screen.

6. Operating Instructions

6.1. Adjusting LED Lights

The endoscope features adjustable LED lights around the camera lens. Locate the brightness adjustment wheel on the cable's control unit. Rotate the wheel to increase or decrease the illumination as needed for clear viewing in dark environments.

Image: The endoscope probe submerged in water, demonstrating its IP67 waterproof rating. The image also highlights the four adjustable LED lights surrounding the camera lens, which can be controlled for brightness.

6.2. Using Autofocus

This endoscope is equipped with an autofocus function, eliminating the need for manual focus adjustment. The camera will automatically adjust to provide a clear image of objects at varying distances. This feature ensures optimal clarity for inspecting details like carbon residue, rust, or small components.

Image: A comparison demonstrating the effectiveness of the autofocus camera. The left side shows a clear, focused image of engine components (labeled "Teslong"), while the right side shows a blurry image (labeled "Other"), illustrating the superior clarity provided by the autofocus feature.

Image: An illustration depicting the wide depth of field of the endoscope camera, ranging from 0.7 inches to 100 feet. Examples show clear images of a detailed turbine engine part (close-up) and an airplane (distant), highlighting the camera's ability to maintain focus across a broad range.

6.3. Capturing Images and Videos

Most compatible camera applications will have buttons or options to capture still images or record video. Refer to your specific application's interface for these controls. Images and videos will typically be saved to your device's photo gallery or a designated folder within the app.

6.4. Using Accessories

The included accessories (magnet, mirror, hook) can be attached to the end of the camera probe for enhanced functionality:

• Magnet: Useful for retrieving small metallic objects from inaccessible areas.
• Mirror: Provides a side-viewing angle, ideal for inspecting walls of pipes or hidden corners.
• Hook: Can be used to retrieve non-metallic items or to maneuver cables.

To attach an accessory, carefully slide it onto the end of the camera probe until it is securely seated.

7. Maintenance

7.1. Cleaning the Probe

The camera probe is IP67 waterproof. After use, especially in dirty or wet environments, gently wipe the probe with a soft, damp cloth. For stubborn grime, a small amount of mild soap can be used, followed by wiping with a clean, damp cloth. Do not use abrasive cleaners or solvents. Ensure the lens is clear of debris for optimal image quality.

7.2. Storage

Store the endoscope in a clean, dry place, away from direct sunlight and extreme temperatures. Coil the cable loosely to prevent kinks or damage. Keep the protective cap on the camera lens when not in use.

8. Troubleshooting

9. Specifications

10. Warranty and Support

For warranty information or technical support, please refer to the contact details provided at your point of purchase or visit the official Sweet taize website. Please retain your proof of purchase for warranty claims.