Introduction
This instruction manual provides guidance for the proper installation, operation, and maintenance of your YOKAMU Replacement 551002118 Filter. This filter is designed to replace the original filter in compatible Craftsman wet/dry vacuum models, ensuring efficient debris collection and air filtration.
Compatibility
The YOKAMU Replacement 551002118 Filter is compatible with the following Craftsman wet/dry vacuum models:
- VOC1612PF 3701
- VOA407S
- VJF912PF0201
- VJF608PF0201
- VBV809PF
- VBV1210
- CMXEVCVVJH1612
- CMXEVCVVJF910
- CMXEVCVVJC809
- CMXEVCVVJC507P
- CMXEVCVVBVA1612
This filter replaces OEM Part Number: 551002118.
Installation Instructions
Follow these steps to install the replacement filter in your Craftsman wet/dry vacuum:
- Safety First: Ensure the vacuum cleaner is unplugged from the power outlet before beginning any installation or maintenance.
- Remove Powerhead: Unlatch and carefully remove the powerhead assembly from the vacuum tank.
- Remove Old Filter: Locate the existing filter. Depending on your vacuum model, it may be secured with a filter nut or a twist-lock mechanism. Remove the old filter and dispose of it properly.
- Install New Filter: Slide the new YOKAMU 551002118 filter onto the filter cage. Ensure it is seated firmly and evenly. If your model uses a filter nut, secure it hand-tight.
Image 1: Side view of the YOKAMU Replacement 551002118 Filter, showing its conical shape. This filter is designed to slide over the vacuum's filter cage.
- Replace Powerhead: Carefully place the powerhead back onto the vacuum tank, ensuring it aligns correctly. Latch the powerhead securely.
- Test: Plug in the vacuum and perform a brief test to ensure proper operation and suction.
Image 2: Angled view of the YOKAMU Replacement 551002118 Filter, highlighting the opening where it attaches to the vacuum's filter cage.
Operating Instructions
This filter is designed for both wet and dry vacuuming applications. For optimal performance, ensure the filter is clean and properly installed before each use. When vacuuming fine dust or liquids, monitor the filter's condition more frequently.
Maintenance
Regular maintenance of your filter will extend its lifespan and maintain your vacuum's performance.
- Cleaning: For dry debris, gently tap the filter against a hard surface to dislodge accumulated dust. For more thorough cleaning, the foam material can be rinsed with water. Ensure the filter is completely dry before reinstallation to prevent mold growth and damage to the vacuum motor.
- Replacement: The frequency of filter replacement depends on usage and the type of debris collected. Replace the filter when you notice a significant decrease in suction power, visible damage, or if it cannot be cleaned effectively.
Image 3: Another side view of the YOKAMU Replacement 551002118 Filter, illustrating its uniform foam construction. Regular inspection of this surface for damage or excessive clogging is recommended for maintenance.
Troubleshooting
- Reduced Suction: Check if the filter is clogged with debris. Clean or replace the filter as necessary. Ensure the filter is properly seated and there are no gaps allowing air to bypass it.
- Dust Escaping from Exhaust: Inspect the filter for any tears or damage. Ensure the filter is correctly installed and forms a tight seal. If damaged, replace the filter.
- Unusual Odors: If the filter has been used for wet pickup, ensure it is thoroughly dried after cleaning to prevent mildew or bacterial growth, which can cause odors.
Specifications
| Feature | Detail |
|---|---|
| Brand | YOKAMU |
| Model Number | 41272-1 |
| Material Type | Foam |
| Included Components | Filter |
| Reusability | Reusable |
| Number of Pieces | 1 |
| Unit Count | 1.0 Count |
Warranty and Support
Every product from YOKAMU includes a 30-day Money-back guarantee and an 18-Month Worry-free Warranty. If you have any questions regarding compatibility with your specific vacuum model, please contact YOKAMU customer support with your model and serial number for assistance.
