ZEXVIDA Narrow End Table with Charging Station User Manual

1. Introduction

Thank you for choosing the ZEXVIDA Narrow End Table with Charging Station. This manual provides essential information for the safe assembly, operation, and maintenance of your new furniture. Please read it thoroughly before beginning assembly and keep it for future reference.

2. Safety Information

• This product is intended for indoor use only.
• The product must be assembled and used in accordance with the provisions of this manual.
• Ensure all screws and connections are tightened securely before use. Periodically check and re-tighten as needed.
• Do not overload the table or the electrical outlets.
• Keep the product away from fire sources and high temperatures.
• Do not expose the product to direct sunlight or excessive moisture.
• Place the table on a level, stable surface to prevent tipping.
• Do not stand or sit on the table.
• Keep sharp objects away from the surface to prevent damage.

3. Package Contents

Please verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

• Table Top Panel (with integrated charging station)
• Table Legs (4 pcs)
• Connect Panels (2 pcs)
• Long Shelf Panels (2 pcs)
• Short Shelf Panels (6 pcs)
• Hardware Pack (bolts, screws, foot pads, screwdriver)
• Assembly Instruction Manual

4. Assembly Instructions

Assembly is quick and straightforward. Follow the steps below carefully. An Allen wrench and screwdriver are included for your convenience.

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches. Verify all parts against the package contents list.
2. Attach Foot Pads: Screw the 4 adjustable foot pads (D) onto the bottom of each table leg (2) in a clockwise direction. Adjust the height of the feet to maintain the table's balance on uneven surfaces.
3. Assemble Lower Shelf: Attach the Long Shelf Panels (4) and Short Shelf Panels (5) to the Table Legs (2) using the provided bolts (B). Ensure the panels are aligned correctly.
4. Attach Connect Panels: Secure the Connect Panels (3) to the Table Legs (2) using bolts (A).
5. Install Table Top: Place the Table Top Panel (1) onto the assembled frame. Secure it using bolts (A) from the bottom to the top.
6. Secure Charging Station: As shown in the picture, use 2 screws (C) to assemble the charging station (G) onto the surface of the Table Top Panel (1).
7. Final Tightening: Once all components are in place, gently tighten all screws and bolts. Do not overtighten.

Image: Fully assembled ZEXVIDA Narrow End Table, showcasing its compact design and integrated charging station.

Image: Diagram illustrating the dimensions of the end table: 21.7 inches L x 10 inches W x 21.7 inches H.

Image: Close-up view of the charging station, featuring two USB ports and two standard power outlets.

Assembly Video Guides:

5. Operating Instructions

The ZEXVIDA Narrow End Table features an integrated charging station for your convenience.

• Power Connection: Plug the 4.9ft power cord from the table's charging station into a standard wall outlet.
• USB Charging: Use the two built-in USB ports to charge your smartphones, tablets, and other USB-powered devices.
• AC Power Outlets: Utilize the two standard AC power outlets for lamps, laptops, or other electronic devices.
• Lid Feature: The tabletop features a thoughtful lid design to help keep items secure and prevent them from slipping off.

6. Maintenance

To ensure the longevity and appearance of your ZEXVIDA End Table, follow these simple maintenance guidelines:

• Cleaning: Wipe the surface with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, which can damage the finish.
• Spills: Promptly wipe up any spills to prevent staining or damage to the engineered wood.
• Tighten Fasteners: Periodically check all screws and bolts and tighten them if necessary to maintain structural stability.
• Avoid Overloading: Do not place excessively heavy items on the table or shelves.

7. Troubleshooting

If you encounter any issues with your ZEXVIDA Narrow End Table, please refer to the following common solutions:

• Wobbly Table: Ensure the table is placed on a level surface. Adjust the foot pads (D) on the bottom of the legs to stabilize the table. Check and tighten all assembly bolts.
• Charging Station Not Working: Verify that the power cord is securely plugged into both the table and a functioning wall outlet. Test the outlet with another device to confirm it has power.
• Missing Parts: If any parts were missing upon delivery, please contact ZEXVIDA customer support immediately for assistance.

8. Specifications

9. Warranty and Support

For warranty information or customer support, please refer to the contact details provided with your purchase or visit the official ZEXVIDA website. Please have your model number (FH001) and purchase date ready when contacting support.

We are committed to providing high-quality products and excellent customer service. Your satisfaction is our priority.