vidaXL Recliner Chair Dark Grey Fabric User Manual

1. Introduction

This manual provides essential instructions for the assembly, operation, and maintenance of your vidaXL Dark Grey Fabric Recliner Chair. Please read this manual thoroughly before use to ensure safe and correct operation. Keep this manual for future reference.

2. Safety Instructions

To prevent injury or damage to the product, always follow these safety guidelines:

• Read all instructions carefully before assembly and use.
• Keep children and pets away from the assembly area.
• Ensure all components are securely fastened before using the chair.
• Do not exceed the maximum weight capacity of 110 kg (242 lbs).
• Avoid standing on the chair or using it as a step stool.
• Do not allow children to play with the reclining mechanism.
• Place the chair on a level and stable surface.

3. Package Contents

Before assembly, verify that all parts listed below are present and undamaged. If any parts are missing or damaged, do not proceed with assembly and contact customer support.

• Backrest
• Seat Base with Footrest
• Armrests (Left and Right)
• Legs/Feet
• Hardware Pack (screws, washers, Allen key)

Figure 3.1: Exploded view of the recliner chair components, showing the backrest, seat, armrests, and base.

4. Setup and Assembly

Assembly is required for this recliner chair. Follow these steps carefully:

1. Attach the Backrest: Align the metal brackets on the backrest with the corresponding slots on the seat base. Slide the backrest down until it clicks securely into place.
2. Attach the Armrests: Connect the armrests to the sides of the seat base using the provided screws and Allen key. Ensure they are firmly tightened.
3. Install the Legs/Feet: Screw the four legs into the designated holes on the underside of the chair base. Tighten them securely.
4. Final Check: Once assembled, gently rock the chair to ensure all connections are stable and secure.

Figure 4.1: The assembled recliner chair, ready for use.

5. Operating Instructions

The recliner chair features a manual reclining function for adjustable comfort.

5.1 Reclining the Chair

1. Locate the manual reclining handle on the right side of the chair.
2. Pull the handle firmly to release the footrest and allow the backrest to recline.
3. Lean back gently to adjust the chair to your desired reclining angle, up to 135 degrees.

Figure 5.1: Close-up view of the manual reclining handle.

5.2 Returning to Upright Position

1. To return the chair to its upright position, gently push the footrest down with your legs.
2. Simultaneously, lean forward slightly. The backrest will return to its original upright position.

Figure 5.2: Illustration of the chair's reclining and upright positions.

6. Care and Maintenance

Proper care will extend the life and appearance of your recliner chair.

• Regular Cleaning: Vacuum the fabric regularly using an upholstery attachment to remove dust and loose debris.
• Spot Cleaning: For spills, blot immediately with a clean, dry cloth. For stubborn stains, use a damp cloth with a mild, pH-neutral fabric cleaner. Test the cleaner on an inconspicuous area first. Do not saturate the fabric.
• Avoid Sunlight: Keep the chair away from direct sunlight to prevent fading of the fabric.
• Check Connections: Periodically check all bolts and screws and tighten them if necessary to maintain stability.
• Avoid Harsh Chemicals: Do not use abrasive cleaners, bleach, or harsh chemicals, as these can damage the fabric and finish.

7. Troubleshooting

Refer to the table below for common issues and their solutions.

8. Specifications

9. Warranty and Support

For warranty information, product registration, or technical support, please refer to your purchase documentation or contact vidaXL customer service directly.

You can also visit the official vidaXL website for additional resources and contact options: www.vidaxl.fr