Introduction
Thank you for choosing the Homary Smart Toilet with Built-In Bidet. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your new smart toilet. Please read this manual thoroughly before installation and use, and retain it for future reference.
This smart toilet is designed to offer a hands-free, hygienic, and comfortable bathroom experience with features such as automatic lid opening, foot-sensor flushing, a built-in bidet with adjustable settings, a heated seat, and ambient lighting.
Safety Information
Please observe the following safety precautions to prevent injury or damage to the product:
- Ensure the toilet is installed by a qualified professional in accordance with local plumbing and electrical codes.
- Do not expose the product to excessive moisture or direct water spray, except for intended cleaning.
- Do not attempt to disassemble or repair the unit yourself. Contact customer support for assistance.
- Keep the remote control away from water and extreme temperatures.
- Ensure the power outlet is properly grounded.
Product Features Overview
The Homary Smart Toilet integrates advanced features for enhanced hygiene and comfort:
Product Demonstration Video
This video demonstrates the key features and functions of the Homary Smart Bidet Toilet, including automatic lid opening, bidet wash modes, heated seat, and flushing.
Installation
Proper installation is crucial for the optimal performance and longevity of your smart toilet. It is highly recommended to have this product installed by a certified plumber.
Pre-Installation Checklist:
- Verify all components are present and undamaged.
- Ensure water supply and electrical outlet (120V AC, 60Hz, dedicated circuit recommended) are available at the installation site.
- Confirm rough-in dimensions match the product specifications.
Rough-in Dimensions:
For detailed step-by-step installation instructions, please refer to the separate installation guide provided with your product packaging.
Operating Instructions
Familiarize yourself with the various functions of your smart toilet using the remote control and integrated sensors.
Automatic Lid & Seat Functions:
- Auto Open/Close: The lid will automatically open when a user approaches and close after they leave.
- Foot-Activated Seat Opening: Gently tap the foot sensor located at the base of the toilet to open the seat for standing use.
Flushing Options:
- Foot Sensor Flushing: Tap the foot sensor to initiate a flush.
- Remote Control Flushing: Use the dedicated flush button on the remote.
- Side Button Flushing: A manual flush button is located on the side of the toilet for convenience.
- Stand-off Flushing: The toilet can be configured to flush automatically after the user stands up and moves away.
- Power-Outage Flush: In case of a power outage, a manual flush mechanism is available to ensure functionality.
Bidet Functions:
Use the remote control to select and adjust bidet settings:
- Water Temperature: Adjust to your preferred warmth (e.g., 34°C, 37°C, 40°C).
- Water Pressure: Increase or decrease water intensity.
- Nozzle Position: Adjust the nozzle forward or backward for optimal cleaning.
- Wash Modes: Select from Female Cleanse, Posterior Cleanse, Children Cleanse, or Massage mode.
- Nozzle Self-Cleaning: The nozzle performs an automatic self-clean before and after each use.
Comfort Features:
- Heated Seat: Adjust the seat temperature for year-round comfort.
- Warm-Air Drying: After bidet use, activate the warm-air dryer to reduce the need for toilet paper. Adjust air temperature as desired.
- Ambient Lighting / Night Light: The built-in LED lighting provides a soft glow, enhancing safety and visibility during nighttime use.
Maintenance
Regular cleaning and maintenance will ensure the longevity and hygienic performance of your smart toilet.
Exterior Cleaning:
- Wipe the exterior surfaces with a soft, damp cloth and a mild, non-abrasive cleaner.
- Avoid using harsh chemicals, abrasive pads, or solvents, as these can damage the finish.
- Ensure no water enters the electrical components.
Nozzle Cleaning:
- The bidet nozzle performs an automatic self-cleaning cycle.
- For deeper cleaning, gently pull out the nozzle and wipe it with a soft cloth and mild soap. Do not use excessive force.
Bowl Cleaning:
- Use a toilet brush and a standard toilet bowl cleaner.
- Flush thoroughly after cleaning.
Troubleshooting
If you encounter any issues, please refer to the following common troubleshooting steps before contacting customer service.
| Problem | Possible Cause | Solution |
|---|---|---|
| No power / Unit unresponsive | Power cord unplugged, circuit breaker tripped, power outage. | Check power connection, reset circuit breaker, verify power supply. |
| Bidet not spraying water | Water supply valve closed, water filter clogged, user not seated properly. | Open water supply valve, clean/replace water filter, ensure proper seating. |
| Lid/seat not opening automatically | Sensor obstructed, sensor dirty, auto-open feature disabled. | Clear obstructions, clean sensor, check remote settings to enable feature. |
| Flushing issues | Water pressure low, sensor malfunction, manual flush needed. | Check water pressure, clean sensors, use manual flush if necessary. |
If the problem persists after attempting these solutions, please contact Homary customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | homary |
| Model Number | J02MT000004US |
| Color | White |
| Product Dimensions (D x W x H) | 26.97" x 16.14" x 18.9" (685mm x 410mm x 480mm) |
| Material (Toilet) | Ceramic |
| Material (Seat) | Polypropylene (PP) |
| Installation Type | Freestanding |
| Flush Rate | 1.32 GPF (Gallons Per Flush) |
| Flushing System | Siphon Flush |
| Bidet Water Temperature Settings | Adjustable (e.g., 34°C, 37°C, 40°C) |
| Heated Seat Temperature Settings | Adjustable (e.g., 34°C, 37°C, 40°C) |
| Warm Air Dryer Temperature Settings | Adjustable (e.g., 45°C, 50°C, 55°C) |
| Included Components | Smart Bidet Toilet, Remote Control |
Warranty and Support
Homary provides customer support for any questions or issues you may have regarding your smart toilet.
Contact Information:
- Email: service@homary.com
- Service Time: Reply within 24 hours (excluding public holidays).
- Please provide your order number when contacting us via email for faster service.
For warranty details, please refer to the warranty card included with your product or visit the official Homary website.
