1. Introduction
Thank you for choosing the Purveyor 15 The Ozarks Full House Bed Frame. This manual provides essential information for the safe assembly, proper use, and maintenance of your new bed frame. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
2. Safety Information
WARNING: Failure to follow these safety instructions could result in serious injury or property damage.
- Always assemble the bed frame on a soft, clean surface to prevent damage to the wood and flooring.
- Ensure all hardware is securely tightened before use. Periodically check and re-tighten all connections.
- Do not allow children to play on or under the bed frame during assembly.
- This bed frame is designed for use with a standard full-size mattress. Do not use a mattress that exceeds the recommended dimensions or weight.
- Do not jump on the bed. Excessive force can damage the frame and slats.
- Keep small parts and packaging materials away from children to prevent choking hazards.
- Assembly requires an intermediate skill level and the use of a drill for pocket hole construction. Exercise caution when using power tools.
3. Package Contents
Before assembly, verify that all components are present and undamaged. If any parts are missing or damaged, please contact Purveyor 15 customer support.
- Poplar Wood Frame Pieces (Headboard, Footboard, Side Rails, Roof Frame components)
- Wood Slats
- Hardware Pack (Screws, Bolts, Washers, Allen Wrench)
- #2 Square Drill Bit (6" long style)
- Instruction Manual
Image 1: Assembled Purveyor 15 The Ozarks Full House Bed Frame. This image shows the complete bed frame with a mattress and bedding, featuring a child reading inside.
4. Assembly Instructions
Assembly of this bed frame requires an intermediate skill level and the use of a drill for the pocket hole method. Please follow these steps carefully.
- Prepare the Area: Clear a spacious, clean, and soft area for assembly to prevent scratches to the wood and floor.
- Identify Components: Unpack all components and identify each piece using the provided parts list (if applicable, or by visual comparison).
- Assemble Base Frame: Connect the side rails to the headboard and footboard using the provided hardware and the pocket hole method. Ensure all connections are flush and secure. Use the included #2 square drill bit with your drill for this step.
- Install Slats: Place the wooden slats across the assembled base frame. Secure each slat to the side rails using the provided screws. Ensure even spacing for optimal mattress support.
- Construct Roof Frame: Assemble the roof frame components according to the diagrams (if provided, otherwise general instruction). Attach the roof frame to the main bed frame structure.
- Final Tightening: Once all components are assembled, carefully go over all connections and tighten any loose screws or bolts. Do not overtighten.
Image 2: Detail of the bed frame slat and rail connection. This image highlights the sturdy construction where the wooden slats are secured to the side rails.
5. Usage Instructions
- Mattress Placement: Carefully place your full-size mattress onto the assembled bed frame slats. Ensure it is centered and fully supported.
- Weight Distribution: Distribute weight evenly across the bed frame. Avoid concentrating heavy loads in one area.
- Regular Inspection: Periodically inspect the bed frame for any signs of wear, loose connections, or damage. Address any issues promptly.
6. Maintenance
- Cleaning: Wipe the wood surfaces with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the natural poplar wood finish.
- Wood Care: Poplar wood may naturally exhibit a green tint which will mellow to light browns/tans with exposure to light. This is a natural characteristic and not a defect.
- Hardware Check: Every 3-6 months, check all screws and bolts to ensure they are tight. Re-tighten as necessary to maintain stability.
7. Troubleshooting
- Squeaking Noises: If the bed frame squeaks, check all connections and tighten any loose hardware. Ensure the mattress is properly seated on the slats.
- Instability: If the bed feels unstable, re-check all assembly steps, ensuring all components are correctly aligned and all hardware is fully tightened.
- Damaged Parts: Do not attempt to repair significantly damaged parts. Contact Purveyor 15 customer support for replacement parts.
8. Specifications
| Feature | Detail |
|---|---|
| Model | Pr-Ozarks-Full |
| Size | Full |
| Product Dimensions (L x W x H) | 194.9L x 144.8W x 193H centimetres |
| Material | Solid Poplar Wood |
| Color | Natural |
| Style | No Legs |
| Special Feature | Adjustable Height |
| Assembly Required | Yes, intermediate skill level with pocket hole method. |
Image 3: General dimensions diagram for a house bed frame. This diagram illustrates the overall measurements of a similar bed frame. Please refer to the specifications table above for the exact dimensions of the Full size Purveyor 15 The Ozarks Bed Frame.
9. Warranty and Support
Purveyor 15 is committed to quality and customer satisfaction. Our products are hand-crafted in Ozark, Missouri, and built to last. While specific warranty details are not provided in this manual, we encourage you to contact our dedicated support team for any questions, concerns, or assistance with your product.
For support, please refer to the contact information provided at the point of purchase or visit the official Purveyor 15 website.
