EYYTHUNG Farmhouse Bar Stools (Set of 2) - 25-inch Counter Height Instruction Manual

Introduction

This manual provides comprehensive instructions for the assembly, safe use, and maintenance of your EYYTHUNG Farmhouse Bar Stools. Please read all instructions carefully before assembly and use to ensure proper function and longevity of the product.

This image displays the fully assembled EYYTHUNG Farmhouse Bar Stools positioned at a kitchen island, illustrating their intended use and aesthetic.

Safety Information

• Avoid use in wet conditions to prevent slipping or accidents.
• Ensure all screws and bolts are securely tightened before each use. Periodically check and re-tighten as necessary.
• Do not stand on the stool or use it as a ladder.
• Do not exceed the maximum weight capacity of 300 lbs per stool.
• Keep children away from the assembly area. Small parts may pose a choking hazard.

Package Contents

Please verify that all components are present before beginning assembly. If any parts are missing or damaged, contact customer support.

• Bar Stool Backrests (2)
• Bar Stool Seats (2)
• Leg Assemblies (2 sets)
• Footrest Bars (4)
• Assembly Hardware (screws, washers, Allen wrench)

Assembly Instructions

Assembly is straightforward and typically takes a few minutes per stool. It is recommended to assemble on a soft, clean surface to prevent scratching.

1. Carefully unpack all components and lay them out. Identify each part according to the package contents list.
2. Attach the backrest to the seat using the provided screws. Ensure the backrest is oriented correctly.
3. Connect the leg assemblies to the underside of the seat. Hand-tighten screws initially.
4. Insert the footrest bars between the leg assemblies. Ensure they are properly aligned and then secure with screws.
5. Once all components are in place, fully tighten all screws with the provided Allen wrench. Do not overtighten.
6. Place the assembled stool on a level surface and check for stability. If the stool wobbles, loosen screws slightly, press down on the seat to level, and then re-tighten.

Usage Guidelines

These bar stools are designed for comfortable seating at counter-height surfaces.

• Always sit centrally on the seat to maintain balance and stability.
• Utilize the footrest for added comfort and support.
• The ergonomic curved design of the seat and backrest is intended to support the natural curve of the spine for extended comfort.

Detail view highlighting the ergonomic design of the bar stool, featuring a curved seat cushion and backrest for enhanced comfort and support.

Care and Maintenance

Proper care will help preserve the appearance and structural integrity of your bar stools.

• Cleaning: Wipe with a damp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the wood finish.
• Inspection: Periodically inspect all connections and hardware. Re-tighten any loose screws to ensure stability and safety.
• Floor Protection: The stools are equipped with non-slip foot pads to protect your floors. Ensure these pads remain intact and replace if worn.

This image illustrates key features such as the smooth, rounded corners for safety, the robust solid wood construction, and the non-slip foot pads designed to protect floors and provide stability.

Troubleshooting

• Stool wobbles after assembly: Ensure all screws are evenly tightened. Loosen all screws slightly, press down firmly on the seat to level the stool, then re-tighten all screws.
• Missing parts: Refer to the 'Package Contents' section. If parts are missing, contact EYYTHUNG customer support.
• Squeaking: Check all connections for tightness. A small amount of lubricant on screw threads can sometimes resolve squeaking.

Product Specifications

A diagram providing precise measurements for the EYYTHUNG Bar Stool, including height, width, and depth, to assist with placement and fit.

Warranty and Support

For warranty information or technical support, please contact EYYTHUNG customer service through the retailer where the product was purchased or visit the official EYYTHUNG website. Please have your model number (B0DNFGX75M) and purchase date available when contacting support.