Lococo UHF Wireless Flute Microphone System

Introduction

The Lococo UHF Wireless Flute Microphone System is designed to provide crystal-clear audio for wind instruments, including flutes, piccolos, and clarinets. Utilizing advanced UHF technology, it ensures reliable signal transmission up to 160ft, making it suitable for various performance and recording environments. Its shockproof design and flexible gooseneck microphone offer secure and precise sound capture.

Figure 1: The Lococo UHF Wireless Flute Microphone System is versatile for outdoor performances, video recording, live streaming, and teaching.

Included Components

Please verify that all items listed below are included in your package:

• Transmitter (1)
• Receiver (1)
• 6.35mm Adapter (1)
• 2-in-1 USB Cable (1)
• Instruction Manual (1)

Figure 2: All components included in the package: Transmitter, Receiver, 6.35mm Adapter, 2-in-1 USB Cable, and Instruction Manual.

Setup

1. Charging the Devices

Before first use, fully charge both the transmitter and receiver. Use the included 2-in-1 USB-C cable to charge both units simultaneously. A full charge takes approximately 2 hours and provides up to 6 hours of continuous performance.

Figure 3: Both the transmitter and receiver can be charged simultaneously using the provided 2-in-1 USB cable.

2. Attaching the Microphone to Your Instrument

The microphone features a flexible gooseneck and a sturdy velcro strap for secure attachment to various wind instruments. Position the microphone near the sound source of your instrument for optimal audio capture. The silicone shock absorbers and anti-slip design ensure a gentle yet firm fit, protecting your instrument from damage.

Figure 4: Close-up view of the professional tubular instrument velcro strap and anti-slip design for secure attachment.

3. Connecting the Receiver

Plug the receiver into your amplifier, mixer, or speaker system. If your device requires a 6.35mm jack, use the included 6.35mm adapter. The receiver has a 3.5mm plug for direct connection to smaller devices.

Figure 5: The complete system showing the microphone transmitter attached to a flute and the receiver with the 6.35mm adapter.

Operating Instructions

1. Powering On/Off

Press and hold the Power On/Off button on both the transmitter and receiver to turn them on or off. The devices will automatically pair upon powering on, indicated by a solid blue light on the receiver.

2. Adjusting Volume and Channels

The transmitter features a digital display for volume and channel selection. Use the 'Volume Plus' and 'Volume Down/Frequency Switch' buttons to adjust the microphone's output volume (U01-U07). To change the channel, press and hold the 'Volume Down/Frequency Switch' button until 'CH' appears on the display, then use the volume buttons to cycle through the available channels (CH1-CH4).

Figure 6: Detailed view of the transmitter and receiver, highlighting the digital display, velcro straps, volume controls, indicator light, and charging port.

Figure 7: The digital screen displays volume level, selected channel, and battery status.

3. Wireless Transmission Range

The system offers a reliable signal range of up to 160ft (50 meters) in open spaces, providing freedom of movement during performances.

Figure 8: Illustration of the 160ft wireless transmission range from the microphone to the speaker.

Maintenance

1. Cleaning

Wipe the microphone and receiver with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the foam windscreen is clean and free of debris.

2. Storage

Store the system in a cool, dry place away from direct sunlight and extreme temperatures. Avoid placing heavy objects on the devices.

3. Battery Care

To prolong battery life, avoid fully discharging the devices frequently. Recharge them regularly, especially if they will not be used for an extended period.

Troubleshooting

• No Sound or Intermittent Audio:
  • Ensure both transmitter and receiver are fully charged and powered on.
  • Check that the receiver is securely plugged into the audio input of your amplifier/mixer.
  • Verify that the volume on the transmitter is not set to U00.
  • Try changing the channel on the transmitter to avoid interference.
  • Ensure the distance between the transmitter and receiver is within the 160ft range and there are no major obstructions.
• Poor Sound Quality (Distortion, Muffled Sound):
  • Adjust the microphone's position on the instrument to optimize sound pickup.
  • Ensure the foam windscreen is properly placed and not damaged.
  • Check the input gain settings on your amplifier/mixer.
• Device Not Charging:
  • Ensure the USB cable is properly connected to both the device and the power source.
  • Try using a different USB port or power adapter.

Specifications

Figure 9: Key technical specifications of the condenser microphone, including frequency response, sensitivity, audio dynamic range, sample rate, and battery life.

Warranty and Support

For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the official Lococo website. Keep your purchase receipt for warranty claims.