Swiitech T1
Swiitech Bluetooth Transmitter Receiver User Manual
Model: T1
Introduction
The Swiitech Bluetooth Transmitter Receiver is a versatile 2-in-1 audio adapter designed to enhance your audio experience by enabling both transmitting (TX) and receiving (RX) Bluetooth capabilities. This device allows you to connect non-Bluetooth audio sources to Bluetooth-enabled headphones or speakers, and also to stream audio from your Bluetooth devices to wired audio systems. Featuring Bluetooth 5.3 and a Qualcomm Chip, it ensures stable, fast, and high-quality audio connections.
Image: Swiitech Bluetooth Transmitter Receiver, a compact white device with a 3.5mm audio jack.
Product Overview
Familiarize yourself with the components and controls of your Swiitech Bluetooth Transmitter Receiver.
Image: Detailed diagram showing the components of the Swiitech Bluetooth Transmitter Receiver, including the 3.5mm audio connection, flexible audio cable, RX/TX switch, reset button, volume control, status indicator, power on/off button, and power display.
- 3.5mm Audio Connection: Used for connecting to audio sources or output devices.
- Flexible Audio Cable: Ensures versatile connectivity in various situations.
- RX/TX Switch: Toggles between Receiver (RX) and Transmitter (TX) modes.
- Reset Button: Used to clear pairing history and re-enter pairing mode.
- Volume Control: Adjusts the audio output level.
- Status Indicator (LED A/B): Displays connection status and mode.
- Power On/Off Button: Turns the device on or off.
- Power Display: Indicates the current battery level.
Setup and Pairing
Charging the Device
Before first use, fully charge the device. Use the provided charging cable. The power display LEDs will indicate charging status and battery level. A full charge provides approximately 15 hours of working time and takes about 2 hours.
Image: Illustration highlighting the Bluetooth 5.3 and Qualcomm chip for fast and stable connections.
Transmitter (TX) Mode Pairing
In TX mode, the device transmits audio from a non-Bluetooth source to Bluetooth headphones or speakers.
- First Device Pairing:
- Ensure the RX/TX switch is set to TX.
- Press and hold the MFB (Multi-Function Button) for about 3 seconds to enter pairing mode. The LED A and B indicators will alternately flash blue.
- Put your Bluetooth headphones or speakers into pairing mode.
- The device will automatically connect. Once connected, LED A will turn solid blue, indicating successful pairing.
- Plug the 3.5mm audio cable from the adapter into the audio output jack of your non-Bluetooth device (e.g., TV, airplane entertainment system, gym equipment).
Image: Step-by-step visual guide for pairing the first device in Transmitter (TX) mode, showing the device, headphones, and connection to an airplane entertainment system.
- Second Device Pairing (Dual Pairing):
- After successfully pairing the first device, put the second Bluetooth headphone or speaker into pairing mode.
- Double-click the MFB on the Swiitech adapter. The LED A and B indicators will alternately flash again.
- The adapter will search for and connect to the second device. Both LED A and B will turn solid blue once both devices are connected.
Image: Step-by-step visual guide for pairing a second device in Transmitter (TX) mode, showing the adapter and two pairs of headphones connected.
Receiver (RX) Mode Pairing
In RX mode, the device receives audio from a Bluetooth source (e.g., smartphone, tablet) and transmits it to wired speakers or car stereos.
- First Device Pairing:
- Ensure the RX/TX switch is set to RX.
- Press and hold the MFB for about 3 seconds to enter pairing mode. The LED A and B indicators will alternately flash blue.
- On your smartphone or other Bluetooth source device, search for "T1" in the Bluetooth settings and connect.
- Once connected, LED A will turn solid blue.
- Plug the 3.5mm audio cable from the adapter into the audio input of your wired speaker, car stereo, or wired headphones.
Image: Step-by-step visual guide for pairing the first device in Receiver (RX) mode, showing connection to a smartphone and car audio system.
- Second Device Pairing (Dual Pairing):
- After successfully pairing the first device, ensure the second Bluetooth source device is ready for pairing.
- Double-click the MFB on the Swiitech adapter. The LED A and B indicators will alternately flash again.
- On the second Bluetooth source device, search for "T1" and connect. Both LED A and B will turn solid blue once both devices are connected.
Image: Step-by-step visual guide for pairing a second device in Receiver (RX) mode, showing two smartphones connected to the adapter.
Important Note: When pairing, it is recommended to turn off any nearby Bluetooth devices (such as your phone) to prevent the adapter from connecting to unintended devices.
Resetting the Device: To reset the device and clear all pairing records, turn on the transmitter, plug in the charging cable, and press and hold the "Reset Button" for 8 seconds. The LED A/B indicators will flash twice at the same time.
Operating Modes
Transmitter (TX) Mode Applications
Use TX mode to wirelessly stream audio from non-Bluetooth devices to your Bluetooth headphones or speakers.
- Airplane Entertainment: Connect to in-flight entertainment systems to use your personal Bluetooth headphones.
- TVs: Stream audio from your TV to Bluetooth sound devices for private listening.
- Gym Equipment: Connect to treadmills or other gym machines with 3.5mm audio jacks.
- Gaming Devices: Enjoy wireless audio from gaming consoles with a 3.5mm output.
Image: Diagram illustrating the use cases for Transmitter (TX) mode (Gaming, Airplane, TV to wireless earbuds, Bluetooth speaker, Bluetooth headphones) and Receiver (RX) mode (Tablet, Cell phone to wired earphone, car stereo, wired speakers).
Image: A person using the Swiitech adapter to connect wireless earbuds to an in-flight entertainment screen, demonstrating its use in TX mode for travel.
Receiver (RX) Mode Applications
Use RX mode to receive audio from your Bluetooth-enabled devices and play it through wired audio systems.
- Car Audio Systems: Transform your car's wired stereo into a Bluetooth-enabled system.
- Home Stereos: Connect your smartphone or tablet to older home stereo systems.
- Wired Headphones/Speakers: Give Bluetooth capabilities to your favorite wired audio devices.
Image: The Swiitech adapter connected to a car's auxiliary input, with a smartphone playing music, illustrating its use in RX mode for car audio.
Maintenance
To ensure the longevity and optimal performance of your Swiitech Bluetooth Transmitter Receiver, follow these maintenance guidelines:
- Cleaning: Wipe the device with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- Handling: Handle the device with care to prevent physical damage. Avoid dropping or subjecting it to strong impacts.
- Charging: Always use the original charging cable provided. Using incompatible chargers may damage the battery.
Troubleshooting
If you encounter issues with your Swiitech Bluetooth Transmitter Receiver, refer to the following common problems and solutions:
| Problem | Solution |
|---|---|
| Haven't been able to connect? | Please clear the pairing and then reconnect your device. Turn on the adapter and plug the charging cable, and press and hold "Reset Button" for 8s, then LED A/B Indicator flashes 2 times at the same time. One important thing is make sure there are no other Bluetooth devices turned on, otherwise the T1 will connect to other devices. |
| How to connect your TV with your Bluetooth headphones or speakers via T1? | First, please turn on the Bluetooth headphones/speakers, then power on T1 and switch it to TX mode (The LED A and B will flash alternately), and put them close to make the headphones/speakers and T1 be connected. One important thing is that please make sure there is no other Bluetooth device turned on around them. When the LED A becomes solid on, your Bluetooth headphones/speakers show connected status. That means the T1 connected with the Bluetooth headphones/speaker successfully. And then plug the T1 to the AUDIO OUTPUT jack on your TV. It will be connected. If there is no 3.5mm jack audio output, please use RCA cable. If there is only Optical jack on your TV, then you need another optical converter. |
| No sound from TV? | If you are pretty sure that you have successfully connected your Bluetooth device with T1. Please check: 1, that the aux cable is securely plugged into the "AUDIO OUT" or headphone jack on your TV. 2, Adjust the TV's sound settings from "TV speaker" to "Audio out" to "Bluetooth headphones" or "Bluetooth speaker" or something like that. (NOTE: Our transmitter is incompatible with Airpods 3/4/Pro, Bose, Beats, Sony Bluetooth devices.) |
| Why cannot charge? | Please use the charging cable in the package. Otherwise the battery will be damaged. |
| Does it work with Airpods? | The T1 can work with Airpods 1 and Airpods 2, but CANNOT work with Airpods 3/4/Pro, Bose, Beats/Sony Bluetooth devices. |
| How can I play music in my car? | First please turn on Bluetooth on your cell phone and power on the T1 and switch it to RX mode. And put the T1 and your cell phone closely to make them connected. And the plug T1 to your car audio output. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | T1 |
| Connectivity Technology | Bluetooth 5.3 |
| Special Feature | Low Latency, Qualcomm Chip |
| Power Source | Battery Powered (1 Lithium Ion battery required) |
| Working Time | Up to 15 hours |
| Charging Time | Approximately 2 hours |
| Item Weight | 4.2 ounces |
| Package Dimensions | 5.63 x 4.72 x 0.87 inches |
| Color | White |
Warranty and Support
For warranty information and technical support, please refer to the documentation included with your product or visit the official Swiitech website. Contact information for customer service can typically be found on the manufacturer's product page or within the packaging.
Related Documents - T1
 |
Swiitech TR-01 Bluetooth Adapter User Guide: Connect Your TV Step-by-step instructions for connecting your TV to a Bluetooth adapter using 3.5mm audio or RCA cables with the Swiitech TR-01 model. Includes TV settings guidance. |
 |
Swiitech T1 Wireless 2-in-1 Adapter User Manual User manual for the Swiitech T1 Wireless 2-in-1 Adapter, providing setup instructions, FCC warnings, and IC warnings. |
 |
Swiitech T-ONE Wireless 2-in-1 Adapter User Guide Comprehensive user guide for the Swiitech T-ONE Wireless 2-in-1 Adapter, detailing its features, specifications, basic operation, pairing modes (TX/RX), connecting to various devices like TVs and speakers, troubleshooting, and important precautions. Learn how to use this Bluetooth 5.3 adapter for seamless audio transmission and reception. |
 |
Swiitech TR-01 Bluetooth Adapter: Connecting to Your TV User guide for the Swiitech TR-01 Bluetooth Transmitter Receiver, detailing how to connect to your TV using 3.5mm audio cable or RCA cables for wireless audio streaming. |
 |
APWIKOGER C83pro BT 5.4 Transmitter Receiver Aux Adapter Specifications Technical specifications and features for the APWIKOGER C83pro Bluetooth 5.4 transmitter and receiver adapter, designed for wireless audio on flights, cars, and home systems. |
 |
Swiitech T ONE Wireless 2 in 1 Adapter User Guide User guide for the Swiitech T ONE Wireless 2 in 1 Adapter, detailing its features, specifications, operation, pairing modes (TX and RX), and troubleshooting. |
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.