Introduction
This instruction manual provides essential information for the proper use and maintenance of your BRUVISH Vital 100S Replacement Filter. This filter is designed for compatibility with LEVOIT Vital 100S-P Air Purifier models LAP-V102S-WUS (White) and LAP-V102S-KUS (Black). Adhering to these instructions will help ensure optimal performance and longevity of your air purification system.
Image: The BRUVISH Vital 100S Replacement Filter.
Product Overview
The BRUVISH Vital 100S Replacement Filter features a 3-in-1 filtration system designed to capture various airborne particles and odors. This system includes a Nylon Pre-filter, an H13 grade True HEPA filter, and an Activated Carbon filter.
Image: Illustration of the 4-layer filtration system, including activated carbon and melt-blown cloth layers.
- Nylon Pre-filter: Captures large particles such as dust, lint, fibers, and pet hair.
- H13 True HEPA Filter: Traps at least 99.97% of airborne particles 0.3 microns in size, including fine dust, smoke particles, pollen, and pet dander.
- Activated Carbon Filter: Absorbs odors from cooking, pets, smoke, and volatile organic compounds (VOCs).
Image: The filter system is designed to capture pet dander and odors, contributing to a cleaner environment for pet owners.
Compatibility
This replacement filter is specifically designed for the LEVOIT Vital 100S Air Purifier. It is compatible with models LAP-V102S-WUS and LAP-V102S-KUS. Please verify your air purifier model before installation to ensure proper fit and function. This filter is not compatible with the LEVOIT Vital 100 model.
Image: Visual guide confirming compatibility with LEVOIT Vital 100S and incompatibility with LEVOIT Vital 100.
Installation Instructions
Follow these steps to replace the filter in your LEVOIT Vital 100S Air Purifier:
- Power Off and Unplug: Before attempting any maintenance, ensure the air purifier is turned off and unplugged from the power outlet.
- Open Filter Cover: Locate and open the filter compartment cover on your air purifier. Refer to your air purifier's manual for specific instructions on accessing the filter.
- Remove Old Filter: Carefully remove the used filter from the compartment. Dispose of the old filter responsibly.
- Unpack New Filter: Remove the new BRUVISH Vital 100S Replacement Filter from its plastic packaging.
- Insert New Filter: Place the new filter into the air purifier compartment, ensuring it is seated correctly. The blue pull tabs should face outwards for easy removal later.
- Close Cover: Securely close the filter compartment cover.
- Plug In and Reset: Plug the air purifier back into the power outlet. Turn on the air purifier and reset the filter life indicator according to your air purifier's instructions (typically by pressing and holding the filter reset button).
Maintenance and Replacement
For optimal air purification performance, it is recommended to replace the BRUVISH Vital 100S Replacement Filter every 3 to 6 months. This timeframe may vary depending on air quality, usage frequency, and the presence of pets or smokers in the environment. Regular replacement ensures the filter continues to effectively capture pollutants and odors.
Image: Recommended filter replacement schedule for maintaining air quality.
Note: The pre-filter layer can be gently cleaned with a soft brush or vacuum cleaner to extend its life, but the HEPA and activated carbon layers are not washable and should not be cleaned with water. Attempting to wash these layers will damage the filter and reduce its effectiveness.
Troubleshooting
- Reduced Airflow: If airflow seems reduced after installing a new filter, ensure the filter is correctly seated and the compartment cover is fully closed. Check for any obstructions in the air intake or outlet.
- Persistent Odors: If odors persist after filter replacement, verify that the new filter was removed from its plastic packaging before installation. Ensure the filter replacement schedule is being followed, as heavily polluted environments may require more frequent changes.
- Filter Indicator Light: If the filter indicator light remains on after replacement, follow the air purifier's specific instructions for resetting the filter life monitor. This usually involves pressing and holding a button for a few seconds.
- Unusual Noise: If the air purifier makes unusual noises after filter replacement, ensure the filter is installed correctly and not obstructing the fan.
Specifications
| Feature | Detail |
|---|---|
| Model Name | Vital 100S HEPA Filter |
| Brand | BRUVISH |
| Compatibility | LEVOIT Vital 100S-P Air Purifier (LAP-V102S-WUS, LAP-V102S-KUS) |
| Filtration Type | 3-in-1 (Nylon Pre-filter, H13 True HEPA, Activated Carbon) |
| HEPA Grade | H13 True HEPA |
| Filtration Efficiency | 99.97% of 0.3 micron particles |
| Recommended Replacement | Every 3-6 months |
| Product Dimensions | Approximately 11.61" W x 12.51" H x 1.49" D (295mm W x 318mm H x 38mm D) |
| Item Weight | 0.352 ounces (0.01 Kilograms) |
Image: Detailed dimensions of the replacement filter.
Warranty and Support
This instruction manual does not include specific warranty information for the BRUVISH Vital 100S Replacement Filter. For any questions regarding product warranty, technical support, or customer service, please contact the seller directly through your purchase platform. They will be able to provide the most accurate and up-to-date information.