Juskys Naya 90x200 cm Children's Floor Bed Instruction Manual

Introduction

Thank you for choosing the Juskys Naya 90x200 cm Children's Floor Bed. This bed is designed to provide a safe and comfortable sleeping environment for children aged 3 to 10 years. Its low-to-the-ground design promotes independence and safety, while the solid pine wood construction ensures durability. This manual provides essential information for assembly, safe use, and maintenance of your new children's bed.

Safety Information

WARNING:

This bed is equipped with a safety barrier to prevent falls. Please assemble and disassemble the barrier with caution to avoid any damage or injury. Always ensure all components are securely fastened before allowing a child to use the bed. Regularly check all screws and fittings to ensure they remain tight. Do not use the bed if any part is broken or missing. Keep small parts away from children during assembly.

Package Contents

Before beginning assembly, please verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.

• 1 x Children's Floor Bed Frame with Safety Barrier
• 1 x Cold Foam Mattress
• 1 x Slatted Bed Base
• 1 x Instruction Manual (this document)
• All necessary screws, dowels, and assembly hardware

Image: The Juskys Naya Children's Floor Bed, showing the complete bed with mattress and safety barrier in a child's room setting.

Setup and Assembly

Assembly of the Juskys Naya Children's Floor Bed is designed to be straightforward. It is recommended to have two adults for assembly. Please follow the steps carefully.

1. Unpack Components: Carefully remove all parts from the packaging. Lay them out on a clean, soft surface to prevent scratches. Verify all parts against the package contents list.
2. Assemble Bed Frame: Connect the side panels and head/footboards using the provided screws and dowels. Ensure all connections are tight and secure. The parts are individually packaged and labeled to facilitate assembly.
3. Install Safety Barrier: Attach the safety barrier to the designated side of the bed frame. Ensure it is firmly secured to prevent accidental detachment. The bed features rounded edges for enhanced safety.
4. Insert Slatted Bed Base: Place the wooden slatted bed base into the assembled frame. Ensure it sits correctly and is evenly distributed. The slatted base is designed to support up to 125 kg.
5. Place Mattress: Position the cold foam mattress onto the slatted bed base. The mattress cover is removable and washable for hygiene.
6. Final Check: Before use, double-check all screws, bolts, and connections to ensure they are fully tightened and the bed is stable.

Image: Diagram showing the dimensions of the Juskys Naya Children's Floor Bed, with a sleeping surface of 90x200 cm, a height of 45 cm, and a total length of 205 cm and width of 96 cm.

Image: Close-up view highlighting the stable and durable construction of the Juskys Naya bed frame, made from solid pine wood, with a capacity of up to 125 kg.

Operating Instructions

The Juskys Naya Children's Floor Bed is designed for safe and comfortable use by children aged 3 to 10 years.

• Child Access: The low-to-the-ground design allows children to easily get in and out of bed independently, fostering their development.
• Safety Barrier: The integrated safety barrier provides protection against accidental falls during sleep. Ensure the barrier is always securely attached.
• Mattress Comfort: The included cold foam mattress offers optimal sleeping comfort. Its ergonomic design supports the child's body.
• Ventilation: The slatted bed base ensures optimal ventilation for the mattress, contributing to a hygienic sleeping environment.

Image: The Juskys Naya bed showcasing superior sleeping comfort with its slatted base, wide wooden slats, and optimal ventilation.

Image: The Juskys Naya floor bed featuring a safety barrier with rounded edges, designed for a secure sleeping area.

Image: Diagram illustrating the ergonomic cold foam mattress with H3 firmness, showing support points for head, shoulders, pelvis, thighs, and feet.

Maintenance

Proper care and maintenance will extend the life of your Juskys Naya Children's Floor Bed.

• Cleaning the Frame: Wipe the wooden frame with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the UV paint finish.
• Mattress Care: The mattress cover is removable and washable. Follow the care instructions on the mattress label for washing. Allow the mattress to air out regularly to maintain freshness.
• Slatted Base: Periodically check the wooden slats for any signs of damage or wear. Ensure they are clean and free from moisture.
• Hardware Check: Regularly inspect all screws, bolts, and connections to ensure they are tight. Re-tighten if necessary to maintain the bed's stability and safety.

Troubleshooting

If you encounter any issues with your Juskys Naya Children's Floor Bed, please refer to the following common solutions:

• Missing Parts: If any components are missing upon delivery, please check all packaging thoroughly. If still missing, contact the retailer or manufacturer's customer service immediately.
• Assembly Difficulties: Ensure you are following the instruction manual step-by-step. Verify that you are using the correct hardware for each step. If parts do not fit, double-check their orientation. Some reviews indicate that while assembly is generally easy, care is needed when screwing into the wood to prevent damage.
• Bed Instability: If the bed feels wobbly after assembly, re-check all screws and connections. Ensure they are fully tightened. Uneven flooring can also contribute to instability; consider using furniture pads if needed.
• Mattress Issues: If the mattress appears creased or does not fully expand, allow it more time to decompress after unpacking. Ensure it is placed correctly on the slatted base.
• Safety Barrier Instability: If the safety barrier feels loose, ensure its attachment points are correctly aligned and securely fastened to the bed frame.

Specifications

Warranty Information

Specific warranty details for the Juskys Naya Children's Floor Bed are typically provided at the point of purchase or within separate documentation included with the product. Please retain your proof of purchase for any warranty claims. For detailed information regarding warranty coverage, duration, and terms, please refer to the warranty card or contact the retailer or Juskys customer service directly.

Customer Support

Should you require further assistance, have questions about assembly, or need to report a missing or damaged part, please contact the retailer from whom you purchased the Juskys Naya Children's Floor Bed. You may also visit the official Juskys website for support resources or to find contact information for their customer service department.

For general inquiries, you can often find helpful information on the product page or the brand's store on the platform where you made your purchase.

Juskys Brand Store: Visit Juskys Store on Amazon.fr