Nicholas Holiday 5.5-FT Santa & Moose on Ladder Christmas Sculpture Lights Instruction Manual

1. Introduction

This manual provides essential instructions for the safe assembly, operation, and maintenance of your Nicholas Holiday 5.5-FT Santa & Moose on Ladder Christmas Sculpture Lights. This festive decoration features Santa and a moose climbing a ladder, pre-lit with 70 clear, steady-on lights and 20 LED G40 lights for additional color. It is designed for both indoor and outdoor use.

Please read this manual thoroughly before installation and retain it for future reference.

2. Safety Information

WARNING: To reduce the risk of fire and electric shock:

• Do not install on trees having needles, leaves, or branch coverings of metal or materials that look like metal.
• Do not mount or support strings in a manner that can cut or damage wire insulation.
• Inspect the product carefully before each use. Discard any products that have cut, damaged, or frayed wire insulation or cords, cracked lampholders or enclosures, loose connections, or exposed copper wire.
• Do not overload electrical outlets.
• Always unplug the product when not in use or before performing any maintenance.
• Ensure all connections are secure and protected from moisture when used outdoors.

3. Package Contents

Verify that all components are present before beginning assembly:

• Santa & Moose on Ladder Sculpture (pre-lit)
• Coated metal frame sections
• Plush and tinsel coverings (pre-attached)
• Metal lawn stakes
• Spare bulbs
• Fuses

4. Setup and Assembly

Assembly of the Holiday Living Santa & Moose on Ladder Christmas Sculpture is designed to be straightforward and requires no tools.

1. Carefully remove all components from the packaging.
2. Unfold the coated metal frame sections. Ensure all parts are aligned correctly.
3. Connect the frame sections as indicated by the design. The plush and tinsel coverings are pre-attached to simplify this step.
4. Position the assembled sculpture in your desired indoor or outdoor location.
5. For outdoor use, secure the sculpture to the ground using the provided metal lawn stakes. Insert the stakes through the designated loops or anchor points on the base of the frame and firmly push them into the soil.

Figure 4.1: The fully assembled 5.5-FT Santa and Moose on Ladder Christmas Sculpture, ready for display. Santa is at the top of the ladder holding a blue gift, while the moose is below him holding a green gift.

Figure 4.2: The Christmas sculpture displayed outdoors in a snowy environment, illustrating its intended use and scale.

5. Operating Instructions

The Santa & Moose on Ladder Christmas Sculpture is designed for simple operation.

1. Once assembled and securely placed, locate the power cord. The product features a 5-ft lead cord wire.
2. Plug the power cord into a standard electrical outlet. For outdoor use, ensure the outlet is a Ground Fault Circuit Interrupter (GFCI) protected outlet and that all connections are weatherproof.
3. The lights will illuminate immediately upon plugging in. There is no separate on/off switch.
4. To turn off the sculpture, simply unplug it from the electrical outlet.

Figure 5.1: Close-up view of the electrical plug, which includes a fuse compartment for safety.

6. Maintenance

Cleaning

• Always unplug the sculpture before cleaning.
• Use a soft, dry cloth to gently wipe down the surfaces.
• For stubborn dirt, a slightly damp cloth can be used, but ensure the product is completely dry before plugging it back in.
• Do not use harsh chemicals or abrasive cleaners, as these can damage the materials and finish.

Storage

• After the holiday season, carefully disassemble the sculpture if necessary, following the assembly steps in reverse.
• Store the sculpture in its original packaging or a suitable storage container in a cool, dry place, away from direct sunlight and extreme temperatures.
• Ensure the power cord is neatly coiled and not kinked or damaged during storage.

7. Troubleshooting

Lights Not Illuminating

• Check Power Connection: Ensure the power cord is securely plugged into a functional electrical outlet.
• Check Fuse: The plug contains a fuse. If the lights do not work, the fuse may be blown. Unplug the unit, open the fuse compartment on the plug, and replace the fuse with a spare of the same type and rating.
• Inspect Bulbs: While the product uses steady-on lights, individual bulbs can still fail. Check for any loose or broken bulbs and replace them with the provided spares.
• Inspect Wiring: Carefully examine the wiring for any cuts, frays, or loose connections. If damage is found, discontinue use.

8. Specifications

Figure 8.1: Dimensional overview of the sculpture, indicating a height of 66 inches, length of 28 inches, and width of 17.5 inches.

9. Warranty and Support

For information regarding warranty coverage or technical support, please refer to the product packaging or contact the manufacturer, Nicholas Holiday, directly. Keep your purchase receipt as proof of purchase.