Introduction
Thank you for choosing the Feit Electric 2ft LED T8 Linear Tube Light. This manual provides important information regarding the installation, operation, and maintenance of your new LED tube lights. These 10-watt (20-watt equivalent) direct replacement (Type A) non-dimmable linear LED tubes are designed to replace F17T8, T8, F20T12, or T12 fluorescent and LED tubes. They are engineered for quick and easy plug-and-play installation with most existing magnetic and electronic ballasts, requiring no rewiring. Each tube delivers 800 lumens of 4000K Cool White light, offering significant energy savings and a long lifespan of up to 50,000 hours.
Safety Information
Please read and understand all safety instructions before installation or use. Failure to do so may result in electric shock, fire, or other injuries.
- WARNING: Risk of shock. Disconnect power at the source before installation, inspection, or removal.
- Do not install this product in a pre-heat luminaire with non-shunted bi-pin lamp holders.
- This lamp operates only on electronic or magnetic ballasts. If the lamp does not light when installed in the luminaire, remove the lamp from the luminaire and contact the lamp manufacturer or qualified electrician.
- This device is not intended for use with emergency exits.
- Do not use with dimmers. This product is non-dimmable.
- Do not look directly at the operating LED tube.
- Ensure the fixture is properly grounded.
- Do not modify the tube or its components.
- Suitable for damp locations.
- Mercury-free and shatter-resistant coating for safe disposal.
Product Overview
The Feit Electric LED T8 Linear Tube Light is designed for efficient and long-lasting illumination. It features a G13 base for easy plug-and-play installation into compatible fixtures.
Image: A pack of twelve Feit Electric 2ft LED T8 Linear Tube Lights, showcasing their uniform design and quantity.
Image: A detailed diagram illustrating the 2ft length and 1-inch diameter of the LED tube, along with key specifications such as 800 lumens brightness, 4000K Cool White light color, 50,000 hours life, 10 watts power consumption, and G13 base code.
Key Features:
- Energy Efficient: 10W power consumption, equivalent to 20W fluorescent tubes.
- Bright Illumination: 800 lumens of light output.
- Cool White Light: 4000K color temperature for a balanced, neutral white light.
- Long Lifespan: Up to 50,000 hours of operation.
- Direct Replacement (Type A): Works with most existing magnetic and electronic ballasts.
- Instant On: No warm-up time, flicker-free illumination.
- Safe: Mercury-free with a shatter-resistant coating.
Setup and Installation
These LED tubes are designed for simple plug-and-play installation into existing fluorescent fixtures with compatible ballasts. No rewiring is necessary.
- Step 1: Disconnect Power. Before beginning installation, ensure the power to the fixture is turned off at the circuit breaker or fuse box. This is a critical safety step.
- Step 2: Remove Existing Fluorescent Tubes. Carefully remove the old fluorescent tubes from the fixture. Allow them to cool if they have been recently in use.
- Step 3: Insert LED Tube. Align the G13 pins of the Feit Electric LED tube with the lamp holders in the fixture. Gently push and twist the tube until it is securely seated. Ensure both ends are properly connected.
- Step 4: Restore Power. Once all LED tubes are securely installed, restore power to the fixture from the circuit breaker or fuse box.
- Step 5: Verify Operation. Turn on the light switch to confirm the LED tubes illuminate instantly and without flickering.
Image: A close-up of hands installing a Feit Electric LED tube light into a ceiling fixture, demonstrating the quick and easy direct replacement process.
Image: An illuminated Feit Electric LED tube light, showcasing its 4000K Cool White light output in a typical setting.
Image: A garage setting with a Feit Electric LED tube light installed, demonstrating its instant full brightness and lack of flickering or strobing.
Note: If the lamp does not light when installed, remove it and contact Feit Electric customer support.
Operating Instructions
Once installed, the Feit Electric LED T8 Linear Tube Light operates like a standard fluorescent tube. Simply use the existing light switch to turn the light on or off. The LED tube will provide instant, full brightness without any warm-up time or flickering.
- On/Off Operation: Use the wall switch connected to the fixture to control the light.
- Non-Dimmable: This product is not compatible with dimmers. Attempting to use it with a dimmer may damage the tube or the ballast.
- Optimal Performance: Designed for general illumination in offices, garages, workspaces, warehouses, and similar environments.
Maintenance
The Feit Electric LED T8 Linear Tube Light requires minimal maintenance due to its long lifespan and durable construction.
- Cleaning: Ensure the power is off before cleaning. Wipe the tube with a soft, dry, or slightly damp cloth. Do not use harsh chemicals or abrasive cleaners.
- Replacement: With a 50,000-hour lifespan, frequent replacement is not necessary. When replacement is required, follow the installation steps in reverse.
- Disposal: These tubes are mercury-free and can be disposed of safely according to local regulations.
Troubleshooting
If you encounter issues with your Feit Electric LED T8 Linear Tube Light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. |
|
|
| Light flickers or strobes. |
|
|
| Light is dim. |
|
|
Specifications
| Attribute | Value |
|---|---|
| Model Number | T24/840/LEDG2/RP/12 |
| Light Type | LED |
| Wattage | 10 Watts (20W Equivalent) |
| Voltage | 120 Volts |
| Brightness | 800 Lumens |
| Color Temperature | 4000K Cool White |
| Bulb Shape Size | T8 |
| Bulb Base | G13 |
| Average Life | 50,000 Hours |
| Special Features | Energy Efficient, Flicker-Free, Frosted, Long Lasting |
| Compatibility | Most Magnetic/Electronic Ballasts (Type A) |
| Dimensions | 2ft Length (approx. 1" diameter) |
| Material | Glass |
| Indoor/Outdoor Usage | Indoor |
Warranty
Feit Electric provides a 1-year warranty on this product from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For warranty claims or further details, please contact Feit Electric customer support.
Customer Support
For 24/7 customer support, technical assistance, or warranty inquiries, please visit the Feit Electric help center or contact us directly:
- Online Help Center: help.feit.com
- Phone: Refer to the Feit Electric website for current contact numbers.
Image: A visual representation of Feit Electric's 24/7 customer support, directing users to their online help center at feit.com/help via text and a QR code.
