Black Emblem X2 Wireless Gaming Headset User Manual

Introduction

This manual provides detailed instructions for the Black Emblem X2 Wireless Gaming Headset. It covers setup, operation, maintenance, and troubleshooting to ensure optimal performance and user experience. The headset features high-performance 40mm drivers for clear audio, multiple connectivity options, a lightweight design for comfort, low-latency wireless technology, and dual microphones for versatile communication.

What's in the Box

Black Emblem X2 Wireless Gaming Headset x 1
2.4G Wireless Transmitter (USB-A) x 1
Pluggable Microphone x 1
Type-C Charging Cable x 1
Type-C to 3.5mm Audio Cable x 1
Instruction Manual x 1

Black Emblem X2 Wireless Gaming Headset and included accessories — Image: Black Emblem X2 Wireless Gaming Headset in White-Grey, shown with the detachable microphone, 2.4G wireless transmitter, and various cables.

Product Overview

The Black Emblem X2 headset is designed for comfort and functionality. Key components include:

Adjustable Headband: For a secure and comfortable fit.
Breathable Earcups: Designed for extended wear.
Detachable Boom Microphone: For clear voice communication.
Built-in Microphone: An alternative for communication when the boom mic is detached.
Control Buttons: Located on the earcups for power, volume, and mode selection.
Charging Port: USB Type-C port for recharging the internal battery.
3.5mm Audio Jack: For wired connectivity.

Black Emblem X2 Headset with detachable microphone and visible controls — Image: The Black Emblem X2 headset, highlighting the detachable microphone and the location of control buttons on the earcup.

Setup Instructions

1. 2.4GHz Wireless Connection (USB-A Dongle)

Insert the 2.4G wireless transmitter into an available USB-A port on your PC, PS5, PS4, or Nintendo Switch dock.
Ensure the headset is powered off.
Press and hold the power button on the headset until it turns on. Continue holding the power button for an additional 5 seconds until you hear a pairing alert. This indicates the headset is searching for the dongle.
The headset should automatically connect to the transmitter. A successful connection is usually indicated by a solid light on the dongle or an audio cue from the headset.

2. Bluetooth 5.4 Connection

Ensure the headset is powered off.
Press and hold the power button until the headset enters pairing mode (indicated by a flashing LED or audio prompt).
On your mobile device or PC, navigate to Bluetooth settings and select "Black Emblem X2" from the list of available devices.
Confirm pairing.

Note: Bluetooth mode is not compatible with PS4 or PS5 consoles.

3. Wired Connection (3.5mm Audio Cable)

Connect one end of the Type-C to 3.5mm audio cable to the headset's Type-C port.
Connect the 3.5mm jack end to the audio output port of your device (e.g., controller, PC).
The headset will operate in wired mode, bypassing wireless functions.

Diagram showing USB and Type-C plug and play options for various devices — Image: Visual guide illustrating the USB and Type-C connectivity options for PC, PS5, PS4, Switch, and mobile devices.

Operating Instructions

Power On/Off

To power on, press and hold the power button until the indicator light illuminates.
To power off, press and hold the power button until the indicator light turns off.

Volume Control

Use the volume roller or buttons on the earcup to adjust the audio output level.

Microphone Usage

Detachable Boom Mic: Insert the boom microphone into the designated port on the headset. Adjust its position for optimal voice pickup.
Muting: Use the microphone mute button on the earcup to toggle the microphone on or off.
The headset also features a backup built-in microphone for use when the boom mic is detached.

Audio Modes

The headset may feature different audio modes (e.g., Gaming, Music). Refer to the specific controls on your headset to switch between these modes for optimized sound profiles.

Headset displaying surround sound clarity — Image: The Black Emblem X2 headset illustrating its surround sound capabilities for immersive audio.

Charging and Battery Life

The Black Emblem X2 headset is equipped with a long-lasting battery.

Charging: Connect the Type-C charging cable to the headset's charging port and to a USB power source. The indicator light will show charging status.
Battery Life: A full charge provides approximately 50 hours of usage.

Headset with a large battery icon indicating 45 hours of music time — Image: The Black Emblem X2 headset with a visual representation of its extended battery life, indicating up to 45 hours of music playback.

Compatibility

The Black Emblem X2 Wireless Gaming Headset offers broad compatibility:

2.4GHz Wireless Mode: Compatible with PC, PS5, PS4, and Nintendo Switch.
Bluetooth Mode: Compatible with PC, Mac, and mobile devices.
Wired Mode (3.5mm): Compatible with PC, PS5, and PS4.

Important Compatibility Notes:

This headset is NOT compatible with Xbox consoles in any mode.
Bluetooth mode is NOT compatible with PS4 or PS5 consoles.

Maintenance

To ensure the longevity and performance of your Black Emblem X2 headset, follow these maintenance guidelines:

Cleaning: Gently wipe the earcups and headband with a soft, dry cloth. For breathable cushions, a slightly damp cloth can be used, but ensure they are completely dry before use. Avoid harsh chemicals or abrasive materials.
Storage: Store the headset in a cool, dry place away from direct sunlight and extreme temperatures.
Handling: Avoid dropping the headset or exposing it to excessive force, as this can damage internal components.

Close-up of breathable earcups with arrows indicating airflow — Image: A close-up view of the breathable earcups, designed for comfort during extended use.

Troubleshooting

If you encounter issues with your Black Emblem X2 headset, refer to the following common solutions:

Problem	Solution
Headset does not power on.	Ensure the headset is charged. Connect it to a power source using the Type-C charging cable.
2.4GHz wireless connection fails.	Ensure the 2.4G wireless transmitter is securely plugged into a USB-A port. With the headset off, press and hold the power button until it turns on, then continue holding for an additional 5 seconds until a pairing alert is heard. This initiates the pairing process with the dongle.
Bluetooth connection issues.	Ensure the headset is in Bluetooth pairing mode. Forget the device on your source device and attempt to pair again. Confirm your device is compatible with Bluetooth mode (not PS4/PS5).
No sound or low volume.	Check the headset's volume control and your device's volume settings. Ensure the correct audio output device is selected on your computer or console.
Microphone not working.	Ensure the detachable boom microphone is securely inserted. Check if the microphone mute function is active. Verify microphone input settings on your connected device.

Specifications

Model Name: X2
Connectivity Technology: Wireless (2.4GHz, Bluetooth 5.4), Wired (3.5mm)
Audio Driver Type: Dynamic Driver
Frequency Range: 20 Hz to 20,000 Hz
Impedance: 30 Ohm
Noise Control: Sound Isolation
Battery Life: Up to 50 Hours
Control Method: Touch
Item Weight: 13.1 ounces (220g)
Ear Placement: Over Ear
Manufacturer: Shenzhen Liuli Dream Technology Co.,Ltd.

Warranty and Support

For warranty information or technical support, please contact Black Emblem Direct through your purchase platform or visit the official Black Emblem website. Keep your proof of purchase for any warranty claims.