Generic KTM LED Light Sign User Manual

Introduction

This manual provides essential instructions for the safe and effective use of your Generic KTM LED Light Sign. Please read this manual thoroughly before installation and operation, and retain it for future reference. This LED sign is designed for decorative purposes, featuring a 3D engraved KTM logo and "SPORTMOTORCYCLES" text, illuminated by LED lights.

Setup

1. Unpacking

Carefully remove all components from the packaging.
Verify that all included accessories are present:
- LED Light Sign
- AC Power Cord
- Hanging Chain
Inspect the sign for any visible damage. If damage is found, do not proceed with installation and contact customer support.

2. Mounting

The LED sign is designed for wall mounting. Use the provided durable metal chain for secure installation.

Select a suitable location for the sign. Ensure the surface can support the weight of the sign and that a power outlet is within reach of the AC power cord.
Attach the hanging chain to the designated points on the sign.
Securely hang the sign using appropriate wall anchors or hooks (not included) that can safely bear the sign's weight.

Figure 1: The KTM LED Light Sign, showcasing its illuminated design and 3D engraving. This image illustrates the product's appearance when powered on and ready for display.

3. Power Connection

Connect the AC power cord to the sign's power input port.
Plug the AC power cord into a standard electrical outlet (AC100-240V). The sign operates on a security voltage of 12V DC.
Once connected, the sign should illuminate.

Operating Instructions

The Generic KTM LED Light Sign is designed for simple operation. There are no external controls for light intensity or color change, as each sign displays a single, fixed color (e.g., yellow for this model).

To Turn On: Plug the AC power cord into a live electrical outlet. The sign will illuminate automatically.
To Turn Off: Unplug the AC power cord from the electrical outlet.

For optimal lifespan, avoid frequently plugging and unplugging the unit in rapid succession.

Maintenance

Cleaning the Sign

Always unplug the sign from the power outlet before cleaning.
Use a soft, dry, or slightly damp cloth to gently wipe the acrylic surface.
Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the acrylic material and the LED components.
Ensure the sign is completely dry before reconnecting it to power.

Storage

If storing the sign, keep it in a cool, dry place, away from direct sunlight and extreme temperatures. Protect the acrylic surface from scratches.

Troubleshooting

Problem	Possible Cause	Solution
Sign does not light up.	Power cord not securely plugged in. No power from the outlet. Damaged power cord or adapter.	Ensure the power cord is firmly connected to both the sign and the electrical outlet. Test the outlet with another device to confirm it has power. If the cord or adapter is damaged, discontinue use and seek a replacement.
Light appears dim or flickers.	Unstable power supply. Dust or debris on the sign surface.	Ensure the power supply is stable. Try plugging into a different outlet. Clean the sign's acrylic surface as described in the Maintenance section.

If troubleshooting steps do not resolve the issue, please contact customer support.

Product Specifications

Brand	Generic
Model Number (ASIN)	B0DMTRX2N
Product Dimensions	Approximately 12"L x 8"W (300mm x 200mm)
Mounting Type	Wall Mount (with included hanging chain)
Light Type	LED
Material	Acrylic
Input Power	AC100-240V
Output Power	12V DC (Security Voltage)
Estimated Service Life	90,000-120,000 hours
Included Components	AC power cord, hanging chain
Color	YELLOW (for this specific model)
Theme	Motorcycle (KTM)
Recommended Uses	Indoor, Outdoor (covered), Garage, Shop, Bar, Pub, Club, Restaurant, Room

Warranty Information

Specific warranty details for the Generic KTM LED Light Sign are not provided in the product information. Please refer to your purchase documentation or contact the seller for warranty terms and conditions.

Customer Support

For technical assistance, troubleshooting beyond this manual, or inquiries regarding your product, please contact the seller directly through the platform where the purchase was made. Please have your order number and product model (B0DMTRX2N) available when contacting support.