ToruKeep 1.3 Cubic Foot Fireproof Safe Box User Manual

1. Introduction

Thank you for choosing the ToruKeep 1.3 Cubic Foot Fireproof Safe Box. This safe is designed to provide secure storage for your valuables, documents, and other important items, offering protection against fire and unauthorized access. Please read this manual thoroughly before operating the safe to ensure proper setup and functionality.

Image: The ToruKeep 1.3 Cubic Foot Fireproof Safe Box, highlighting its fireproof and waterproof capabilities.

2. Safety Information

• Do not store emergency keys inside the safe. Keep them in a secure, separate location.
• Ensure the safe is placed on a stable, level surface or securely mounted to prevent tipping.
• Keep the keypad dry and clean. Avoid using abrasive cleaners.
• Do not attempt to force the safe open if it is locked. Refer to the troubleshooting section or contact support.

3. Package Contents

Verify that all items are present in the package:

• ToruKeep 1.3 Cubic Foot Fireproof Safe Box
• Emergency Keys (2)
• Emergency Battery Box
• Removable Shelf (1)
• Mounting Hardware (Expansion Screws)
• User Manual (this document)

Image: The safe box with its dimensions and a display of the included accessories: mounting screws, emergency keys, emergency battery box, and user manual.

4. Setup and Installation

4.1 Initial Opening

Upon first use, or if the batteries are depleted, you will need to use the emergency key to open the safe.

1. Locate the keyhole cover on the keypad.
2. Gently remove the keyhole cover.
3. Insert one of the emergency keys into the keyhole.
4. Turn the key clockwise while simultaneously rotating the knob clockwise to open the door.

4.2 Battery Installation

The safe requires 4 AA batteries (not included) for the electronic keypad to function.

1. Open the safe door using the emergency key (if not already open).
2. Locate the battery compartment on the inside of the safe door.
3. Open the battery compartment cover.
4. Insert 4 AA batteries, ensuring correct polarity (+/-).
5. Close the battery compartment cover.

4.3 Mounting the Safe

For enhanced security, the safe can be bolted to a wall or floor using the pre-drilled holes and included expansion screws.

Image: Visual guide for wall and floor mounting, illustrating the pre-drilled holes and the use of expansion screws for secure installation.

1. Choose a suitable location for mounting.
2. Mark the drilling points through the pre-drilled holes on the back or bottom of the safe onto the wall or floor.
3. Drill holes at the marked points using an appropriate drill bit.
4. Insert the expansion screws into the drilled holes.
5. Align the safe with the screws and secure it tightly.

5. Operating Instructions

The safe can be opened using a digital code, an emergency key, or the emergency battery box.

Image: A visual representation of the three methods to open the safe: using the knob, the keyhole, or the digital keypad.

5.1 Setting the User Code

The user code is a personal code for daily access. It can be 3 to 8 digits long.

1. With the safe door open, press the red reset button located on the inside of the door (usually near the hinge). The yellow light on the keypad will flash twice.
2. Input your desired new user code (3 to 8 digits).
3. Press the '#' key to confirm. The yellow light will flash twice, and you will hear two buzzer beeps, indicating successful code setting. If the yellow light flashes three times with three beeps, the code change was not effective; please try again.

5.2 Setting the Master Code

The master code provides an additional layer of security and can also be 3 to 8 digits long.

1. With the safe door open, press '00' then press the red reset button. The yellow light on the keypad will flash twice.
2. Input your desired new master code (3 to 8 digits).
3. Press the '#' key to confirm. The yellow light will flash twice, and you will hear two buzzer beeps, indicating successful code setting. If the yellow light flashes three times with three beeps, the code change was not effective; please try again.

5.3 Opening the Safe with Digital Code

1. Enter your user code or master code on the keypad.
2. Press the '#' key. The green light will illuminate.
3. Within 5 seconds, rotate the knob clockwise and pull the door open.

5.4 Using the Emergency Battery Box

If the internal batteries are depleted and you cannot open the safe with the digital code, use the emergency battery box.

1. Insert 4 AA batteries into the emergency battery box.
2. Plug the emergency battery box into the port located at the bottom of the keypad.
3. Enter your user code or master code and press '#'. The green light will illuminate.
4. Within 5 seconds, rotate the knob clockwise and pull the door open.

5.5 Silent Mode

To enable or disable keypad sounds for discreet operation:

Image: The safe with an overlay indicating silent keypad mode and an alarm alert for unauthorized access.

• To Turn On Silent Mode: Press '*' and then press '633'.
• To Cancel Silent Mode: Press '*' and then press '66'.

5.6 Wrong Password Locking and Alarm Alert

The safe features a smart warning alarm system to deter unauthorized access.

• If three consecutive wrong passwords are entered, the keypad will be locked for 20 seconds automatically. During this time, any input is ineffective.
• If six consecutive wrong passwords are entered, the keypad will be locked for 5 minutes automatically, and the safe will constantly beep during this time.
• To stop the alarm during a lockout, you can use the emergency key to open the safe and remove the batteries. The beep will stop.

5.7 Internal Lighting

The safe is equipped with an intelligent lighting design. As soon as you open the lock box with the numeric keypad, the light will illuminate for 30 seconds, then slowly dim and go out automatically.

Image: The interior of the safe illuminated by a built-in motion sensor light, showing various items stored inside.

5.8 Removable Shelf

The safe includes a removable shelf to customize the internal storage space according to your needs.

Image: The safe's interior demonstrating how the removable shelf allows for flexible storage of items like cameras, cash, documents, or handguns.

5.9 Security Features Overview

Image: The safe with icons highlighting its anti-prying, anti-drilling, anti-collision, and anti-theft features.

Image: A detailed view of the safe's door, emphasizing the three 20mm tamper-proof locking bolts for enhanced security.

The ToruKeep safe is built with robust security features:

• 2 Round Live-Locking Bolts: Provides strong resistance against forced entry.
• Seamless Forming Construction: Enhances structural integrity.
• Pry-Resistant Concealed Hinges: Prevents tampering with the door hinges.
• Steel Construction: Durable iron material for long-lasting protection.

5.10 Instructional Video

For a visual guide on setting up and operating your ToruKeep safe, please watch the official product video below:

6. Maintenance

• Battery Replacement: Replace batteries annually or when the low battery indicator appears.
• Cleaning: Wipe the safe exterior with a soft, damp cloth. Avoid harsh chemicals.
• Keyhole Maintenance: Keep the keyhole free of dust and debris. Do not lubricate the lock mechanism.

7. Troubleshooting

7.1 Safe Does Not Open with Code

• Ensure batteries are correctly installed and not depleted. Use the emergency battery box if needed.
• Verify you are entering the correct user or master code.
• If the keypad is locked due to multiple wrong entries, wait for the lockout period to expire.
• Use the emergency key as a backup.

7.2 Alarm Sounds Continuously

• This indicates multiple incorrect code entries. The keypad will be locked for a period (20 seconds or 5 minutes).
• To silence the alarm immediately, open the safe with the emergency key and remove the batteries.

7.3 Code Cannot Be Set

• Ensure the safe door is open when attempting to set a code.
• Make sure the yellow light flashes twice after pressing the reset button. If it flashes three times, the previous attempt was unsuccessful.
• Ensure the new code is between 3 and 8 digits.

8. Specifications

9. Warranty and Support

ToruKeep products are manufactured to high-quality standards. For warranty information, technical support, or any questions not covered in this manual, please contact ToruKeep customer service. Refer to the product packaging or the official ToruKeep website for the most current contact details.