Bandai Hobby BD-011 Melander 30 MM Model Kit Instruction Manual

Important Safety Information

WARNING: CHOKING HAZARD - Small parts. Not for children under 3 years.

Please read this manual thoroughly before beginning assembly. Keep this manual for future reference. This model kit contains small parts and is intended for users aged 15 and above.

Introduction

Thank you for purchasing the Bandai Hobby BD-011 Melander 30 MM Model Kit. This kit allows you to construct a detailed model from the Armored Core IV Fires of Rubicon series. Designed for ease of assembly, this kit features snap-fit parts and multi-color runners, eliminating the need for glue and simplifying color recreation.

Package Contents

Verify that all components are present before starting assembly. The package should contain:

• All necessary plastic runners for the Armored Core IV Fires of Rubicon - #06 Balam Industries BD-011 Melander 30 MM model.
• Instruction manual (this document).
• Decals or stickers (if included).

Note: The product box includes a Bandai Namco warning label, confirming it is an officially licensed product.

Setup and Assembly

This model kit utilizes a snap-fit system, allowing for assembly without the use of adhesive. Parts are molded in multiple colors on "runners" to facilitate color recreation without painting.

1. Preparation: Carefully remove parts from the runners using a hobby nipper or cutter. Smooth any nubs with a hobby knife or sandpaper for a clean finish.
2. Follow Instructions: Refer to the included visual assembly guide (not provided in this digital manual) for step-by-step instructions. Assemble sections in the order specified.
3. Joints and Articulation: Pay attention to the 3mm joints used for attaching weapons and ensuring proper articulation of limbs.

Figure 1: BD-011 Melander model demonstrating articulation and 3mm joint compatibility for attaching weapons to shoulders and left arm.

Figure 2: Individual components of the BD-011 Melander's primary weapon, ready for assembly.

Figure 3: Illustration of weapon parts designed for both left and right-hand configurations, highlighting common and specific components for assembly.

Figure 4: Diagram showing the modular nature of the BD-011 Melander, with interchangeable head (HD-011), core (BD-011), arms (AR-011), and legs (LG-011) parts, allowing for customization and assembly with other 30MM series items.

Operating and Usage

Once assembled, your BD-011 Melander model is ready for display and posing. The articulated joints allow for a wide range of dynamic poses.

• Posing: Gently manipulate the joints to achieve desired poses. Avoid excessive force to prevent damage.
• Weapon Attachment: Weapons can be attached to designated hardpoints, typically using 3mm pegs.
• Customization: The 30 MM (30 Minutes Missions) series is designed for modularity. Parts from other 30 MM kits can be interchanged to create unique configurations.

Figure 5: The BD-011 Melander model posed with the MG-014 Ludlow weapon attached.

Figure 6: Rear view of the fully assembled BD-011 Melander model, showcasing its detailed design.

Maintenance

Proper care will ensure the longevity of your model kit.

• Cleaning: Dust the model regularly with a soft brush or compressed air. Avoid using harsh chemicals or abrasive materials.
• Storage: Store the model away from direct sunlight, extreme temperatures, and high humidity to prevent material degradation or discoloration.
• Handling: Handle the model by its main body parts rather than delicate appendages or weapons to avoid accidental detachment or breakage.

Troubleshooting

If you encounter any issues during assembly or display, consider the following:

• Parts not fitting: Ensure you are using the correct parts as indicated in the assembly guide. Check for any excess plastic (nubs) that may be preventing a flush fit and carefully trim them.
• Loose joints: If a joint feels too loose, a small amount of clear nail polish or hobby cement applied to the peg and allowed to dry slightly before reassembly can increase friction.
• Missing parts: Double-check the runners and packaging. If a part is genuinely missing, contact Bandai customer support with proof of purchase.

Specifications

Customer Support

For further assistance, missing parts, or inquiries regarding your Bandai Hobby model kit, please contact Bandai customer support through their official website or the contact information provided on the product packaging.

Please have your model number (2724590) and proof of purchase ready when contacting support.