Povasee 5000A Jump Starter with Air Compressor (Model A6) - Instruction Manual

1. Product Overview

The Povasee 5000A Jump Starter with Air Compressor, Model A6, is a versatile multi-functional device designed for automotive emergencies and convenience. It integrates six essential features: a powerful jump starter, a tire inflator, a flashlight with SOS signaling, a power bank, and a tire pressure gauge. This device is engineered to provide reliable assistance for a wide range of vehicles and situations.

Image 1: Povasee Jump Starter with Air Compressor and various accessories.

This image displays the Povasee Jump Starter unit alongside its included accessories, such as jumper cables, air hose, and charging cables, all neatly arranged to showcase its comprehensive functionality.

2. Safety Information

Read all safety warnings and instructions before using this product. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

• Always connect the red clamp to the positive (+) terminal and the black clamp to the negative (-) terminal.
• Do not touch the red and black clamps together to prevent short circuits.
• Ensure the jump starter is fully charged before use.
• Keep out of reach of children.
• Do not expose the product to rain or wet conditions.
• Do not disassemble the unit. Refer servicing to qualified personnel.
• Disconnect the jump starter from the vehicle battery within 30 seconds after the vehicle starts.

Image 2: Visual representation of the 10 intelligent secure protection features.

This image highlights the advanced safety mechanisms built into the Povasee A6, including over-current, short-circuit, over-voltage, over-charge, over-discharge, reverse-polarity, spark-resistance, over-heat, reverse-connection, and extreme-temperature protection.

3. Package Contents

Verify that all items are present upon opening the package:

• Povasee 5000A Jump Starter with Air Compressor (Model A6)
• Smart Jumper Cables
• Air Hose with 4 Nozzles
• USB-C Charging Cable
• User Manual
• Storage Case

Image 3: All components of the Povasee Jump Starter kit, including the main unit, smart jumper cables, air hose with various nozzles, USB-C charging cable, user manual, and a durable storage case.

This image provides a clear view of everything included in the product package, ensuring users can confirm they have all necessary parts.

4. Product Features and Components

The Povasee A6 is designed for ease of use and maximum utility. Key components include:

• Main Unit: Features a digital display for battery percentage and working status, power button, and various ports.
• Jump Start Port: Dedicated port for connecting smart jumper cables.
• USB-A & USB-C Ports: For charging external devices (power bank function).
• DC Output: 12V/10A output for powering 12V vehicle accessories.
• LED Flashlight: Integrated 800-lumen flashlight with SOS and strobe modes.
• Air Compressor: Built-in 150 PSI air compressor with smart preset and auto-stop function.

Image 4: Close-up view of the jump starter's various ports, digital display, and LED flashlight.

This image provides a detailed look at the device's interface, highlighting the USB-IN, Type-C OUT, DC output, and the 800-lumen LED light, along with the digital display showing battery status.

5. Setup and Charging

5.1 Charging the Jump Starter

Before first use, fully charge the Povasee A6. It is recommended to recharge the unit every 3-6 months to maintain optimal battery health, even if not in use.

1. Connect the provided USB-C charging cable to the USB-C input port on the jump starter.
2. Connect the other end of the USB-C cable to a compatible USB wall adapter (not included).
3. The digital display will show the charging progress. The unit is fully charged when the display shows 100%.

5.2 Checking Battery Level

Press the power button once to check the current battery level on the digital display.

6. Operating Instructions

6.1 Jump Starting a Vehicle

The Povasee A6 can jump start 12V vehicles with up to 9L gas or 8L diesel engines.

1. Ensure the jump starter is at least 50% charged.
2. Insert the smart jumper cable plug firmly into the jump start port on the unit.
3. Connect the red (+) clamp to the positive (+) terminal of the vehicle battery.
4. Connect the black (-) clamp to the negative (-) terminal of the vehicle battery.
5. Once connected, the indicator light on the smart clamp will turn green, indicating it's ready to jump start. If the light is red or flashing, check connections or refer to troubleshooting.
6. Start the vehicle's engine.
7. Once the engine starts, immediately remove the smart jumper cables from the vehicle battery within 30 seconds, then disconnect from the jump starter.
8. If the vehicle does not start on the first attempt, wait at least 1 minute before trying again. If the battery voltage is extremely low (below 9V), press the "RST" button on the smart clamp to activate boost mode, then attempt to start the engine.

Image 5: Visual instructions for connecting the jump starter to a car battery and starting the vehicle.

This image illustrates the four key steps for jump starting a car: inserting the plug, clamping to the battery terminals (red to positive, black to negative), starting the vehicle, and removing the jumper cables.

6.2 Using the Air Compressor

The built-in air compressor can inflate tires up to 150 PSI and features an auto-stop function.

1. Short press the power switch to turn on the unit.
2. Connect the air hose to the tire valve stem.
3. Use the "M" button to select the desired unit (PSI, KPA, BAR) and the "+" / "-" buttons to set the target pressure.
4. Press the air compressor switch to begin inflation. The compressor will automatically stop once the preset pressure is reached.
5. For different inflatables (balls, bicycles, motorcycles, cars), use the appropriate nozzle adapter.

Image 6: The Povasee Jump Starter actively inflating a car tire, demonstrating its air pump functionality.

This image shows the jump starter connected to a car tire, with the digital display indicating the tire pressure, highlighting its use as an emergency air pump.

6.3 Using the Power Bank and Flashlight

The unit can also serve as a power bank and an emergency flashlight.

• Power Bank: Connect your USB-powered devices to the USB-A or USB-C output ports to charge them.
• Flashlight: Press and hold the power button for 3 seconds to turn on the 800-lumen LED flashlight. Press again for strobe mode, and a third time for SOS signaling. Press and hold again to turn off.

Image 7: The jump starter's LED light illuminated, showcasing its emergency torch capabilities with SOS and strobe functions.

This image demonstrates the powerful 800-lumen LED flashlight feature, highlighting its utility for nighttime emergencies or as a general light source, with options for SOS and strobe signaling.

7. Maintenance

• Store the unit in a cool, dry place away from direct sunlight and extreme temperatures.
• Recharge the unit every 3-6 months to prolong battery life.
• Clean the exterior with a soft, damp cloth. Do not use harsh chemicals or abrasive materials.
• Inspect jumper cables and air hose for any damage before each use.

8. Troubleshooting

• Unit not turning on: Ensure the unit is charged.
• Vehicle not starting: Check that jumper cables are correctly connected (red to positive, black to negative). Ensure the smart clamp indicator is green. If battery is extremely low, use boost mode.
• Air compressor not working: Check that the air hose is securely connected and the unit is powered on. Ensure the desired pressure is set.
• Device not charging from power bank: Ensure the device is compatible with USB charging and the cable is properly connected.

9. Specifications

10. Warranty and Support

For warranty information, technical support, or customer service inquiries, please refer to the contact details provided in your product packaging or visit the official Povasee website. Keep your purchase receipt for warranty claims.