vidaXL LED Headboard Artisan Oak

1. Introduction

This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your vidaXL LED Headboard. Please read this manual thoroughly before beginning assembly or use, and keep it for future reference.

The vidaXL LED Headboard is a classic and elegant addition designed to bring a stunning modern touch to your bed frame, perfectly suiting any bedroom. It features vibrant RGB LED lights and offers excellent back support when sitting in bed. The top surface also provides convenient storage for decorative items, photo frames, and alarm clocks.

Image 1.1: Front view of the vidaXL LED Headboard, showcasing its artisan oak finish and integrated shelving.

2. Safety Information

Please observe the following safety precautions to prevent injury or damage to the product:

• Wall Attachment: To prevent tipping, this product must be used with the provided wall attachment device. Securely fasten the headboard to a sturdy wall according to the assembly instructions.
• Power Source: The LED lights require a certified 5V USB power source (not included). Do not use power sources exceeding 5V, as this may damage the LEDs or pose a fire hazard.
• Assembly: Assembly is required. Ensure all parts are present and undamaged before beginning. Follow the assembly instructions carefully. Do not overtighten screws.
• Placement: Place the headboard on a flat, stable surface.
• Children and Pets: Keep small parts and packaging materials away from children and pets to prevent choking hazards.
• Cleaning: Use only a soft, damp cloth for cleaning. Avoid harsh chemicals or abrasive cleaners.

3. Package Contents

Before assembly, please verify that all components listed below are included in your package. If any parts are missing or damaged, contact vidaXL customer support immediately.

• Headboard panels (engineered wood)
• LED light strip with USB connector
• Assembly hardware (screws, dowels, connectors)
• Wall attachment device
• Assembly instructions manual

Note: The bed frame and mattress are not included with this headboard. A 5V USB power source for the LED lights is also not included.

4. Setup and Assembly

Follow these steps carefully to assemble your vidaXL LED Headboard. It is recommended to have two people for assembly.

1. Unpack and Identify Parts: Lay out all components on a clean, soft surface (e.g., a blanket or carpet) to prevent scratches. Identify each part using the provided parts list in the separate assembly guide.
2. Assemble Main Frame: Connect the main headboard panels using the provided screws and dowels. Ensure all connections are secure but do not overtighten. Refer to the detailed diagrams in your assembly guide.
3. Install Shelving: Attach the internal shelving units as indicated in the instructions. These form the compartments for storage and LED light placement.
4. Attach LED Strip: Carefully adhere the LED light strip to the designated area within the shelving compartments. Ensure the USB cable is accessible for connection.
5. Secure to Wall: This is a critical safety step. Using the provided wall attachment device, secure the headboard to a sturdy wall. Mark the drilling points, drill pilot holes, insert wall anchors (if necessary for your wall type), and fasten the headboard securely. Ensure it is level and stable.
6. Connect Power: Plug the USB connector of the LED strip into a certified 5V USB power source (e.g., a phone charger, USB wall adapter, or power bank – not included).

Image 4.1: Dimensional diagram of the headboard, illustrating its width, depth, and height.

Image 4.2: Rear view of the headboard, highlighting the structural components and attachment points for assembly.

5. Operating Instructions

Your vidaXL LED Headboard features integrated RGB LED lights for customizable ambiance.

5.1. LED Light Operation

• Power On/Off: Once the USB connector is plugged into a 5V power source, the LED lights will typically turn on automatically or can be controlled via an inline switch or remote control (if included with your specific LED strip).
• Changing Colors: The LED lights are RGB, allowing for a wide range of colors. Use the provided remote control (if applicable) or inline controller to cycle through preset colors, adjust brightness, or select dynamic lighting modes.
• Customization: With various customizable menus, you can effortlessly change the color of the lights and even set them to adjust automatically, enhancing the contemporary and trendy appeal of the headboard.

Image 5.1: Headboard with LED lights illuminated, demonstrating the ambient lighting effect.

5.2. Storage and Support

• Top Surface: The stable top surface of the headboard is ideal for displaying decorative items, photo frames, and alarm clocks. Do not place excessively heavy items on top.
• Back Support: The headboard provides excellent back support when you sit up in bed to read or watch television.

6. Maintenance and Care

Proper care will ensure the longevity and appearance of your headboard.

• Cleaning: Wipe the surfaces with a soft, slightly damp cloth. For stubborn marks, a mild soap solution can be used, followed by wiping with a clean, dry cloth. Avoid abrasive cleaners, solvents, or polishes that may damage the finish.
• Dusting: Regularly dust the headboard with a dry, soft cloth to prevent dust buildup.
• LED Care: The LED lights are designed for long life and require minimal maintenance. If the LED strip becomes dirty, gently wipe it with a dry cloth. Do not immerse the LED strip or its connector in water.
• Inspection: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary, but do not overtighten.
• Avoid Direct Sunlight: Prolonged exposure to direct sunlight may cause the wood finish to fade over time.
• Humidity Control: Maintain a stable room temperature and humidity level to prevent warping or cracking of the engineered wood.

7. Troubleshooting

If you encounter any issues with your headboard, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact vidaXL customer support.

8. Specifications

9. Warranty and Support

vidaXL products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your product or visit the official vidaXL website.

Customer Support

If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact vidaXL customer support:

• Website: www.vidaxl.com (Check for local contact information)
• Online Store: vidaXL Amazon Store

Please have your model number (857687) and purchase details ready when contacting support.