WBFRYEE 12.3-inch Digital Dashboard for Infiniti Q70 User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your WBFRYEE 12.3-inch Digital Dashboard, designed for compatibility with the Infiniti Q70. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Safety Information

Always prioritize safety during installation and operation. Improper installation or use can lead to vehicle damage or personal injury.

• Ensure the vehicle's power is disconnected before beginning installation.
• Consult a professional if you are unsure about any installation steps.
• Do not attempt to operate the device if it appears damaged.
• Keep the device free from liquids and extreme temperatures.
• Always observe traffic laws and maintain focus on the road while driving.

3. Product Overview

The WBFRYEE 12.3-inch Digital Dashboard replaces the original instrument panel in your Infiniti Q70, offering an enhanced digital display for vehicle information. It features a high-resolution anti-glare screen and runs on a Linux operating system.

Figure 3.1: Front view of the WBFRYEE 12.3-inch Digital Dashboard.

Key Features:

• 12.3-inch Anti-Glare Screen: Provides clear visibility in various lighting conditions.
• Linux Operating System: Ensures stable and efficient performance.
• HD Resolution (1920x720): Delivers sharp and detailed graphics.
• Steering Wheel Control Support: Seamless integration with existing vehicle controls.
• Real-time Feedback: Dynamically adjusts display based on driving conditions.
• Vehicle Status Monitoring: Provides real-time vehicle status, fault warnings, and maintenance tips.
• Diagnostic Startup: Automatically checks indicators for normal operation upon startup.
• Driving Data Recording: Records data for analysis and maintenance.

Figure 3.2: Overview of key features including Linux OS, HD resolution, and steering wheel control support.

4. Setup and Installation

The digital dashboard is designed for a lossless, plug-and-play installation. However, careful attention to detail is required.

4.1 Pre-Installation Steps

1. Park the vehicle on a level surface and engage the parking brake.
2. Turn off the engine and remove the key from the ignition.
3. Disconnect the vehicle's battery to prevent electrical shorts.

4.2 Disassembly of Original Instrument Panel

Figure 4.1: Illustration of the disassembly process for the original instrument panel. Use a pry tool to carefully unclip the two buckles holding the steering wheel trim, then remove the instrument panel.

Carefully pull out the steering wheel. Use a plastic pry tool to gently open the two buckles securing the original instrument panel trim. Once unclipped, carefully remove the existing instrument panel.

4.3 Digital Dashboard Installation

Figure 4.2: Connecting the new digital dashboard to the original car line. Ensure all connections are secure for proper plug-and-play functionality.

1. Connect the provided wiring harness from the new digital dashboard to the original car's wiring. Ensure all connectors are firmly seated.
2. Carefully insert the new 12.3-inch digital dashboard into the dashboard opening, ensuring it clicks into place securely.
3. Reconnect the vehicle's battery.
4. Turn on the ignition to test the functionality of the new dashboard.

Figure 4.3: Comparison of the dashboard appearance before and after the installation of the new digital panel, showcasing the updated look.

5. Operating Instructions

The digital dashboard offers a user-friendly interface with various display options and real-time information.

5.1 Startup and Initial Check

Figure 5.1: The dashboard initiates quickly, typically within 2 seconds, performing an automatic check of all indicators upon ignition start.

Upon vehicle ignition, the dashboard performs a rapid self-check, typically starting within 2 seconds. All indicators are verified for normal operation to ensure safety and readiness.

5.2 Display Modes and Information

The dashboard provides multiple display modes and real-time vehicle status information.

Figure 5.2: Display showing real-time information such as voltage, MPG, transmission temperature, and distance, alongside a door opening/closing reminder and fuel consumption display.

• Real-Time Info: Displays current voltage, MPG, transmission temperature, and distance.
• Door Status: Provides visual reminders for open or closed doors.
• Fuel Consumption: Shows current fuel usage.
• Tire Pressure and Angle: Monitors tire pressure and angle for enhanced safety.
• System Settings: Access various settings including date/time and language.

Figure 5.3: Screen displaying tire pressure and angle information, along with access to system settings for customization.

5.3 Steering Wheel Controls

The digital dashboard supports the vehicle's original steering wheel controls. Use these controls to navigate through menus, change display modes, and adjust settings without taking your hands off the wheel.

5.4 Language Settings

The operating system supports multiple languages including Simplified Chinese, Traditional Chinese, Arabic, Russian, French, Korean, Turkish, Spanish, Italian, and English. To change the language, navigate to the 'System Settings' menu.

6. Maintenance

To ensure the longevity and optimal performance of your digital dashboard, follow these maintenance guidelines:

• Cleaning: Use a soft, lint-free cloth to gently wipe the screen. Avoid abrasive cleaners or solvents that could damage the display.
• Environmental Conditions: Avoid exposing the dashboard to extreme temperatures or direct sunlight for prolonged periods.
• Software Updates: Periodically check for any available software updates from the manufacturer to ensure the latest features and bug fixes.
• Wiring Inspection: If you experience any issues, ensure all wiring connections remain secure and free from damage.

7. Troubleshooting

This section addresses common issues you might encounter with your digital dashboard.

If the problem persists after attempting these solutions, please contact customer support.

8. Specifications

9. Warranty and Customer Support

For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. For technical assistance, troubleshooting beyond this manual, or general inquiries, please contact WBFRYEE customer support through your purchase platform or the manufacturer's official channels.