SISIGAD Electric Scooter for Kids

1. Introduction

This manual provides essential information for the safe operation, assembly, maintenance, and troubleshooting of your SISIGAD Electric Scooter. Please read this manual thoroughly before first use to ensure proper function and safety.

Image: The SISIGAD Electric Scooter, showcasing its design with colorful LED lights on the stem and wheels. A child is shown riding the scooter in the background, demonstrating its use.

2. Safety Information

Your safety is paramount. Always follow these guidelines:

• Always wear a helmet and appropriate safety gear (knee pads, elbow pads) when riding.
• Ensure all screws and quick releases are securely fastened before each ride.
• Do not ride in wet conditions, on uneven surfaces, or at night without adequate lighting.
• Supervise children at all times while they are using the scooter.
• Do not exceed the maximum weight capacity of 70 kg (154 lbs).
• This scooter is designed for children aged 6-12 years.
• Familiarize yourself with local regulations regarding electric scooter use.

3. What's in the Box

Upon opening the package, please verify that all the following components are included:

• SISIGAD Electric Scooter (Main Unit)
• User Manual
• Charger

4. Setup and Assembly

The SISIGAD Electric Scooter requires minimal assembly. Follow these steps:

1. Unfolding the Scooter: Carefully unfold the scooter until it locks into place. Ensure the folding mechanism is securely engaged.
2. Adjusting Handlebar Height:

   The handlebar can be adjusted to 3 different heights (28, 32, and 36 inches) to accommodate children of various ages (6-7 years, 8-10 years, 11-12 years). Locate the quick-release clamp on the stem, open it, adjust the handlebar to the desired height, and securely close the clamp. Ensure the handlebar is firmly locked in position before riding.

   

   Image: A visual guide illustrating the three adjustable handlebar heights (36, 34, 32 inches) and recommended age ranges for each setting, ensuring a comfortable fit as the child grows.

3. Initial Charging:

   Before first use, fully charge the scooter's battery. Connect the charger to the charging port on the scooter and then to a power outlet. The charging time is approximately 7 hours. The battery capacity is 2600mAh (18V/2.6AH), providing an autonomy of approximately 4 KM.

   

   Image: An internal view of the scooter's battery compartment, highlighting the 2600mAh battery and providing specifications for battery type, autonomy, and charging time.

5. Operating Instructions

Learn how to operate your SISIGAD Electric Scooter safely and effectively:

1. Power On/Off: The scooter is activated by a kick-start mechanism. There is no separate power button.
2. Starting the Scooter (Kick Boost):

   Place one foot on the anti-slip deck. Use the other foot to kick off from the ground, similar to a traditional kick scooter. Once you reach a speed of approximately 3 km/h (1.8 mph), the electric motor will engage, and the scooter will accelerate up to its maximum speed of 10 km/h (6 mph). The accelerator is induction-based, requiring a kick to start.

   

   Image: A close-up of the scooter's deck, indicating the kick-start accelerator. Performance metrics such as maximum load (132 lbs / 70 kg), wheel size (5.3 inches), maximum range (4 KM), maximum speed (6 MPH / 10 km/h), and maximum climbing angle (5°) are also displayed.

3. Braking:

   The scooter features a rear foot brake. To slow down or stop, press down firmly on the rear fender above the back wheel with your foot. This acts as both a mudguard and an effective foot brake.

   

   Image: A detailed diagram labeling key components of the scooter, including the non-slip rubber handle, adjustable handlebar, LED lights on the stem and wheels, induction accelerator, anti-slip deck, and the rear foot brake.

4. LED Lights:

   The scooter is equipped with colorful LED lights on the stem and wheels. The front wheels are electromagnetically induced, meaning they light up automatically when the scooter is in motion, adding a fun visual effect to the ride.

6. Maintenance

Regular maintenance ensures the longevity and safe operation of your scooter:

• Cleaning: Wipe the scooter with a damp cloth. Do not use harsh chemicals or abrasive cleaners. Avoid direct water spray to prevent damage to electronic components.
• Battery Care:
  • Charge the battery fully after each use, especially if storing for an extended period.
  • Do not overcharge the battery.
  • Store the scooter in a cool, dry place away from direct sunlight and extreme temperatures.
• Tire Inspection: Regularly check the 5.3-inch solid rubber wheels for wear and tear.
• General Inspection: Periodically check all bolts, screws, and connections to ensure they are tight and secure. Inspect the brake for proper function.

7. Troubleshooting

If you encounter issues with your SISIGAD Electric Scooter, refer to the following common problems and solutions:

8. Specifications

Detailed technical specifications for the SISIGAD Electric Scooter:

9. Warranty and Support

Your SISIGAD Electric Scooter is covered by the standard Amazon return and refund policy. For specific warranty details or technical support, please refer to your purchase documentation or contact SISIGAD customer service through the retailer's platform.

For further assistance, please visit the SISIGAD brand store on Amazon.