AIKE AK1333S

AIKE AK1333S Automatic Soap Dispenser User Manual

Introduction

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your AIKE AK1333S Automatic Soap Dispenser. Please read this manual thoroughly before use and retain it for future reference.

Product Features

  • Compact Design: Elegant and modern, suitable for various spaces like bathrooms and kitchens.
  • Contactless Sensor: Ensures hygienic, hands-free operation to prevent contamination.
  • Adjustable Dispensing: Five customizable levels for precise soap volume control.
  • USB-C Charging: Convenient and long-lasting battery life, minimizing frequent recharges.
  • Durable Material: Constructed from brushed stainless steel for longevity.

Package Contents

Please check the package for the following items:

  • 1 x AIKE AK1333S Automatic Soap Dispenser
  • 1 x USB-C Charging Cable
  • 1 x User Manual

Setup

  1. Unpack: Carefully remove the soap dispenser and all accessories from the packaging.
  2. Initial Charge: Before first use, fully charge the dispenser using the provided USB-C cable. Refer to the "Charging the Device" section for details.
  3. Fill with Soap:
    • Remove the top lid of the dispenser.
    • Pour liquid soap into the reservoir. Do not overfill. The capacity is 380ml.
    • Replace the lid securely.
    Refilling the AIKE AK1333S Automatic Soap Dispenser with liquid soap

    The dispenser has an ideal 380ml capacity, allowing for quick and easy refills without frequent replenishment.

Operating Instructions

  1. Power On/Off: Press and hold the power button located on the top of the dispenser for a few seconds to turn it on or off. An indicator light will confirm the status.
  2. Dispensing Soap: Place your hand under the dispenser's spout. The built-in sensor will detect your hand and automatically dispense a pre-set amount of soap.Hand under the AIKE AK1333S Automatic Soap Dispenser, showing touchless operation

    Equipped with a high-sensitivity sensor for touchless operation, ensuring hygienic soap dispensing.

  3. Adjusting Dispensing Volume:

    The dispenser offers 5 adjustable levels for soap volume. Briefly press the power button to cycle through the levels. The current level will be indicated by a light or display (if applicable).

    Diagram showing 5 adjustable dispensing levels for the AIKE AK1333S soap dispenser

    The dispenser offers 5 adjustable dispensing levels to customize soap flow. Level 1 is suitable for children (before meals), Level 2 for adults (hand washing), Level 3 for cooks (kitchen use), Level 4 for workers (after work), and Level 5 for deep cleaning.

Charging the Device

When the battery is low, the indicator light will signal. To charge:

  1. Connect the provided USB-C cable to the charging port on the dispenser.
  2. Connect the other end of the cable to a standard USB power adapter (not included) or a computer USB port.
  3. The indicator light will show charging status. A full charge takes approximately 7 hours.
  4. Once fully charged, the dispenser can operate for up to 60 days when used twice a day at Level 2.
AIKE AK1333S Automatic Soap Dispenser connected to a USB-C charging cable

The dispenser features a convenient USB-C charging port. A full charge takes approximately 7 hours and provides up to 60 days of use when dispensing twice a day at Level 2.

Maintenance

  • Cleaning: Wipe the exterior of the dispenser with a soft, damp cloth. Do not immerse the dispenser in water or rinse it under running water, as this can damage the electronic components.
  • Refilling: Refill the soap reservoir as described in the "Setup" section when the soap level is low.
  • Long-term Storage: If storing the dispenser for an extended period, ensure it is clean, dry, and fully charged.

Troubleshooting

ProblemPossible CauseSolution
Dispenser does not turn on.Battery is depleted.Charge the dispenser using the USB-C cable.
No soap is dispensed.
  • Soap reservoir is empty.
  • Sensor is blocked or dirty.
  • Soap is too thick.
  • Refill the soap reservoir.
  • Clean the sensor area.
  • Dilute the soap with a small amount of water if it's too viscous.
Soap dispenses inconsistently.
  • Low battery.
  • Sensor interference.
  • Recharge the dispenser.
  • Ensure no objects are obstructing the sensor.

Specifications

BrandAIKE
Model NumberAK1333S
ColorBrushed Stainless Steel
Product Dimensions (L x W x H)19.6 x 12.1 x 8.2 cm (7.7 x 4.8 x 3.2 inches)
Item Weight680 g (1.5 lbs)
MaterialStainless Steel
Liquid Volume380 ml (12.8 fl oz)
Battery1 Lithium-polymer (included)
Charging TypeUSB-C
BPA-FreeYes
Dimensions of the AIKE AK1333S Automatic Soap Dispenser

Product dimensions: 18cm height, 12cm width (including spout), 7.5cm base diameter.

Warranty and Support

AIKE is committed to providing fast and efficient customer service to resolve any issues and ensure your satisfaction. For warranty information or technical support, please contact AIKE customer service through the retailer where you purchased the product or visit the official AIKE website.