Oaufttik AI-9 Series Fiber Fusion Splicer Power Adapter and Power Cord Charger User Manual

1. Introduction

This user manual provides essential information for the safe and efficient use of your Oaufttik AI-9 Series Fiber Fusion Splicer Power Adapter and Power Cord Charger. This complete set is designed to meet American electrical standards and is compatible with AI-6C, AI-7, AI-7C, AI-8, AI-8C, and AI-9 signal fire fiber fusion splicers. Please read this manual thoroughly before operation and retain it for future reference.

2. Package Contents

Verify that all items listed below are present in your package. If any items are missing or damaged, please contact customer support.

• Power Adapter (Main Unit)
• Power Cord (for connecting adapter to wall outlet)
• Recharge Adapter (for connecting power adapter to splicer)

Figure 2.1: Overview of the complete power adapter and power cord set. This image displays the main power adapter unit, the detachable power cord with a standard US plug, and the recharge adapter cable.

3. Safety Information

Please observe the following safety precautions to prevent injury or damage to the product:

• Indoor Use Only: This power adapter is designed for indoor use. Do not expose it to liquid, vapor, or rain.
• Proper Voltage: Ensure the power outlet voltage matches the adapter's input specifications (100-240V, 50-60Hz).
• Avoid Overloading: Do not overload electrical outlets or extension cords, as this can result in a risk of fire or electric shock.
• Handle with Care: Do not drop, disassemble, or attempt to repair the adapter. Refer all servicing to qualified personnel.
• Unplug When Not in Use: Disconnect the power adapter from the wall outlet when not in use for extended periods.

Figure 3.1: Power Supply Label. This image shows the detailed specifications and safety warnings printed on the power adapter unit, including input/output voltage and current ratings.

4. Setup Instructions

1. Connect Power Cord to Adapter: Take the power cord and connect its female end (IEC C13 connector) to the male inlet on the main power adapter unit. Ensure a firm connection.
   

   Figure 4.1: Power Cord Connection. This image highlights the US standard plug of the power cord and its connection point to the main power adapter.
2. Connect Recharge Adapter to Power Adapter: Plug the round connector of the recharge adapter cable into the corresponding port on the main power adapter unit.
   

   Figure 4.2: Recharge Adapter Connection. This image shows the specific port on the power adapter where the recharge adapter cable connects, along with a USB port.

3. Connect to Splicer: Plug the other end of the recharge adapter cable into the designated power input port on your AI-9 Series Fiber Fusion Splicer.
4. Connect to Wall Outlet: Insert the US standard plug of the power cord into a grounded 100-240V AC wall outlet.

5. Operating Instructions

Once the power adapter and power cord are correctly connected to your fiber fusion splicer and a power source, the splicer should receive power. Refer to your specific AI-9 Series Fiber Fusion Splicer manual for detailed operating instructions of the splicer itself.

• The power adapter provides the necessary DC voltage (13.5V / 4.5A) to operate and charge your compatible fiber fusion splicer.
• An indicator light on the power adapter may illuminate when connected to power, indicating it is active.
• Ensure all connections are secure before powering on your splicer.

6. Maintenance

To ensure the longevity and proper functioning of your power adapter and power cord:

• Cleaning: Disconnect from power before cleaning. Use a soft, dry cloth to wipe the surfaces. Do not use liquid cleaners or aerosols.
• Storage: Store the adapter and cords in a cool, dry place away from direct sunlight and extreme temperatures. Avoid tightly coiling the cables to prevent damage.
• Inspection: Periodically inspect the power cord and adapter for any signs of damage, such as frayed wires, cracked casings, or bent pins. Discontinue use if damage is found.

7. Troubleshooting

8. Specifications

9. Warranty and Support

For warranty information or technical support, please refer to the documentation provided with your original purchase or contact Oaufttik customer service directly. Keep your purchase receipt for warranty claims.

Customer Service: Please visit the official Oaufttik website or contact your retailer for support.