1. Introduction
This manual provides comprehensive instructions for the assembly, operation, and maintenance of your Generic Adjustable Pedestal Sign Holder. Designed for versatility and durability, this sign holder is suitable for various indoor and outdoor display needs, including trade shows, retail stores, restaurants, offices, and schools. Please read these instructions carefully before use to ensure proper setup and safe operation.
Image: Two assembled pedestal sign holders, one black and one gold, displaying different promotional materials.
2. Package Contents
Before assembly, please verify that all components are present in your package:
- Base (round, heavy-duty steel)
- Adjustable Pole (stainless steel)
- Sign Frame (aluminum alloy, A2 size)
- PVC Protective Film
- Mounting Screw and Washer
- Anti-slip sheets (2 pieces)
Image: Individual components of the sign holder, including the base, pole, frame, and screw.
3. Assembly Instructions
Follow these steps to assemble your sign holder:
- Attach the Pole to the Base: Insert the bottom end of the adjustable pole into the center hole of the heavy-duty steel base. Secure it firmly using the provided mounting screw and washer from underneath the base.
- Apply Anti-slip Sheets: Peel and stick the two anti-slip sheets to the bottom of the base to enhance stability and prevent scratching surfaces.
- Attach the Sign Frame: Connect the sign frame to the top of the adjustable pole. Ensure it is securely fastened.
- Adjust Height: Loosen the locking mechanism on the pole to adjust the height. The pole can be adjusted from approximately 71 cm (28 inches) to 122 cm (48 inches). Tighten the mechanism once the desired height is reached.
Image: Illustration of the adjustable height range from 70 cm to 120 cm.
4. Operating Instructions
The sign holder offers flexible display options:
- Inserting a Sign: The aluminum alloy frame features a safe opening mechanism. Gently open the frame to insert your A2 size poster or sign. The frame can accommodate materials with a thickness between 0.1 mm and 8 mm. Place the PVC protective film over your sign to protect it from dust and damage, then close the frame securely.
- Adjusting Orientation: The sign frame can be rotated 360 degrees. This allows for display in either portrait or landscape orientation, or any angle in between, to best suit your content and viewing audience.
- Height Adjustment: As described in the assembly section, the pole's height can be adjusted to position your sign at the optimal viewing level.
Image: Demonstration of the sign frame accommodating materials from 0.1 mm to 8 mm thick.
Image: Visual representation of the 360-degree rotation feature of the sign frame.
5. Care and Maintenance
To ensure the longevity and appearance of your sign holder, follow these maintenance guidelines:
- Cleaning: Wipe down the metal surfaces with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish.
- Frame Care: Periodically check the sign frame for any debris or dust that might accumulate. Clean the PVC protective film with a soft cloth to maintain clarity.
- Stability Check: Regularly inspect the pole-to-base connection and the frame attachment to ensure all components remain tight and secure.
- Storage: If storing the sign holder for an extended period, disassemble it and store components in a dry, protected environment to prevent corrosion or damage.
6. Troubleshooting
If you encounter any issues with your sign holder, consider the following:
- Sign Holder is Unstable:
- Ensure the pole is securely tightened to the base.
- Verify that the anti-slip sheets are properly applied to the base.
- Check that the sign holder is placed on a flat, even surface.
- Difficulty Adjusting Height:
- Ensure the locking mechanism on the pole is fully loosened before attempting to adjust the height.
- Avoid forcing the adjustment; if stiff, check for any obstructions.
- Sign Frame Not Holding Securely:
- Ensure the sign frame is properly closed and latched after inserting the sign.
- Verify that the sign material thickness is within the recommended range (0.1 mm to 8 mm).
7. Specifications
| Product Name | Adjustable Pedestal Sign Holder |
| Model Number | Generic |
| Color | Gold |
| Material | Alloy Steel, Aluminum |
| Adjustable Height | 71 cm to 122 cm (approx. 28 to 48 inches) |
| Sign Frame Size | A2 (approx. 42 cm x 60 cm) |
| Max Sign Thickness | 8 mm |
| Rotation | 360 degrees |
| Assembly Required | Yes |
Image: Detailed dimensions for the A2 sign holder.
8. Customer Support
If you have any questions, require assistance with assembly, or encounter any issues not covered in this manual, please do not hesitate to contact our customer service. We are committed to providing support and ensuring your satisfaction with the Generic Adjustable Pedestal Sign Holder.
Please refer to your purchase documentation or the retailer's website for specific contact information.
