Introduction
This manual provides detailed instructions for the assembly, operation, maintenance, and care of your Furniture of America Dannen Modern Classic Queen Bed Frame. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
Image: The fully assembled Dannen Modern Classic Queen Bed Frame in Weathered Black, featuring ornamental coffered panels on the headboard and footboard, set in a bedroom environment.
Safety Information
Please observe the following safety guidelines during assembly and use:
- Ensure all components are present and undamaged before assembly.
- Assemble the bed frame on a soft, clean surface to prevent scratches.
- Do not overtighten screws during assembly.
- A box spring is required for proper mattress support and to maintain the structural integrity of the bed frame.
- Keep small parts away from children during assembly.
- Periodically check all connections to ensure they remain tight.
Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Package Contents
Before beginning assembly, verify that all parts are included in your package. Refer to the assembly diagram for component identification.
- Headboard
- Footboard
- Side Rails
- Slat Kit
- Hardware Pack (screws, bolts, washers, Allen wrench)
Setup and Assembly
Assembly is required for this bed frame. Follow these steps for quick installation:
- Unpack all components and lay them out on a clean, soft surface to prevent damage.
- Attach the side rails to the headboard and footboard using the provided hardware. Ensure all connections are secure but do not overtighten initially.
- Install the slat kit across the side rails. The built-in slats provide mattress stability.
- Tighten all hardware connections once the frame is fully assembled and stable.
- Place your box spring on top of the installed slats. A box spring is essential for complete mattress support and proper bed function.
- Position your mattress on the box spring.
Image: An exploded diagram illustrating the dimensions of the Queen bed frame (89"L x 63.25"W x 64"H) and its components, including the headboard, footboard, side rails, and slat kit. It also indicates that a box spring is required and shows how a 6-inch and 9-inch box spring would fit.
Image: A close-up view of solid wood planks, emphasizing the durable construction materials used in the bed frame.
Operating Instructions
The Dannen Modern Classic Bed Frame is designed to provide stable support for your mattress and box spring. Once assembled, ensure the bed is placed on a level surface.
- This bed frame requires a box spring for optimal mattress support and to ensure the longevity of the frame.
- The integrated slat kit provides a foundation for the box spring, promoting air circulation for your mattress.
- The ornamental coffered panels on the headboard and footboard are decorative features that contribute to the bed's aesthetic appeal.
Image: The Dannen Queen Bed Frame in Weathered Black, shown with a white mattress and pillows, highlighting its functional use.
Maintenance and Care
To maintain the appearance and structural integrity of your bed frame, follow these care instructions:
- Cleaning: Wipe with a dry cloth. For more stubborn marks, a slightly damp cloth can be used, followed immediately by a dry cloth. Avoid harsh chemicals or abrasive cleaners.
- Inspection: Periodically check all bolts and screws to ensure they are tight. Loose connections can affect the stability and lifespan of the bed frame.
- Placement: Avoid placing the bed frame in direct sunlight or near heat sources, as this can cause wood to dry out, crack, or fade.
Image: A detailed close-up of the weathered black finish, showcasing the visible wood grain texture of the bed frame material.
Troubleshooting
If you encounter any issues with your bed frame, consider the following:
- Squeaking or Instability: Ensure all assembly hardware is securely tightened. Check that the bed frame is on a level surface. Verify that a box spring is being used, as it is crucial for stability and support.
- Damaged Parts: If any parts were damaged upon arrival or during assembly, please contact customer service immediately for assistance.
For further assistance, please refer to the "Support and Contact Information" section.
Specifications
| Brand | Furniture of America |
| Model Number | AMJEG-91233CL-R |
| Size | Queen (U.S. Standard) |
| Product Dimensions | 89"L x 63.25"W x 64"H |
| Color | Weathered Black |
| Finish Type | Painted |
| Furniture Finish | Oak |
| Material | Solid rubberwood, engineered wood, white oak veneer |
| Special Feature | Box Spring Needed |
| Assembly Required | Yes |
| Item Weight | 195 pounds |
| UPC | 193578942695 |
Warranty Information
This Furniture of America Dannen Modern Classic Queen Bed Frame comes with a one-year warranty from the date of purchase. This warranty covers manufacturing defects under normal household use. It does not cover damage resulting from improper assembly, misuse, accidents, or normal wear and tear.
Please retain your proof of purchase for any warranty claims.
Support and Contact Information
Should you have any questions, require assistance with assembly, or need to report damaged parts, please contact Furniture of America customer service directly. We are dedicated to finding the best solution for you.
- Customer Service Phone: 888-980-5122
- Email: cs.ec@foagroup.com
Image: A visual representation of customer service representatives, indicating support availability.
