EVATEK HDMI KVM Switch User Manual

Introduction

The EVATEK HDMI KVM Switch is designed to enhance work efficiency by allowing two computers to share two monitors, a keyboard, and a mouse. This device supports Ultra HD 4K@60Hz resolution and features USB 3.0 ports for high-speed data transfer, enabling seamless sharing of peripherals like printers and scanners. It supports both extended and copy display modes, offering flexible setup options for various environments.

Package Contents

• 1x HDMI KVM Switcher
• 2x USB 3.0 Cables
• 1x Wired Desktop Controller
• 1x USB Power Cable (5V)
• 1x Instruction Manual
• 1x Warranty Card
• 4x Foot Pads

Image: Contents of the EVATEK HDMI KVM Switch package.

Product Overview

The EVATEK HDMI KVM Switch (Model EVA-S7232H2-01-01) is a compact device designed for managing two computers with a single set of dual monitors, keyboard, and mouse. It features multiple ports for connectivity and a user-friendly design for efficient operation.

Key Features:

• Dual Monitor Support: Connects two computers to two monitors.
• High Resolution: Supports up to 4K@60Hz (3840*2160@60Hz), backward compatible with 3D, 1080p, and lower resolutions. Adheres to HDMI2.0 standard and HDCP2.2 with a maximum data rate of 18Gbps.
• USB 3.0 Ports: Three USB 3.0 ports offer data transfer speeds up to 5Gbps, 10 times faster than USB 2.0, for sharing peripherals like keyboards, mice, printers, scanners, and USB flash drives.
• Multiple Switching Methods: Switch between computers using the panel button or the external wired desktop controller.
• Display Modes: Supports both extended mode and copy (mirror) mode for flexible display configurations.
• Plug and Play: No driver installation required.
• Wide Compatibility: Compatible with various operating systems including Windows, Mac, Linux, and Chrome OS.

Image: EVATEK HDMI KVM Switch with its various ports and included cables.

Image: Overview of the EVATEK HDMI KVM Switch's main features.

Setup Guide

Follow these steps to correctly set up your EVATEK HDMI KVM Switch.

Connection Diagram:

Image: Comprehensive connection diagram for the KVM switch.

Image: Alternative connection diagram showing front and back panel connections.

Step-by-Step Connection:

1. Power Connection: Connect the provided USB power cable to the "5V IN" port on the KVM switch and to a 5V USB power adapter (not included) or a USB port on one of your computers.
2. Monitor Connection:
   • Connect Monitor 1 to the KVM's "HD OUT A" port using an HDMI cable.
   • Connect Monitor 2 to the KVM's "HD OUT B" port using an HDMI cable.
3. Computer 1 Connection:
   • Connect PC 1's HDMI output 1 to the KVM's "HD IN A" port for PC1.
   • Connect PC 1's HDMI output 2 to the KVM's "HD IN B" port for PC1.
   • Connect PC 1's USB port to the KVM's "USB3.0" port for PC1 using one of the provided USB 3.0 cables.
4. Computer 2 Connection:
   • Connect PC 2's HDMI output 1 to the KVM's "HD IN A" port for PC2.
   • Connect PC 2's HDMI output 2 to the KVM's "HD IN B" port for PC2.
   • Connect PC 2's USB port to the KVM's "USB3.0" port for PC2 using the second provided USB 3.0 cable.
5. Peripheral Connection: Connect your keyboard, mouse, printer, scanner, or USB flash drives to the three "USB3.0" ports on the front panel of the KVM switch.
6. External Controller (Optional): Plug the wired desktop controller into the "CTRL" port on the KVM switch for convenient remote switching.

Important Notes & Requirements:

• Ensure both connected computers support at least two monitors simultaneously.
• For optimal 4K@60Hz resolution, verify that both your source devices (computers), monitors, and HDMI cables support 4K@60Hz.
• Each computer requires two HDMI 2.0 cables and one USB 3.0 cable for proper dual-screen display.
• If a computer lacks two HDMI ports, a reliable adapter or USB-C docking station may be needed to expand the HDMI signal. Refer to the compatibility chart below for guidance.
• A USB cable must be connected from each computer to the KVM switch for the USB peripherals to function correctly.

Image: Important notes and compatibility chart for various computer port configurations.

Operating Instructions

Switching Between Computers:

The EVATEK HDMI KVM Switch offers two convenient methods for switching between connected computers:

1. Panel Button: Press the "SWITCH" button located on the front panel of the KVM device. The indicator lights (PC1/PC2) will show which computer is currently active.
2. External Wired Controller: Use the provided wired desktop controller. Press the button on the controller to switch between PC1 and PC2. This is ideal for keeping the KVM switch out of sight for a tidier desktop.

Note: Keyboard shortcuts (hotkeys) are not supported by this KVM switch.

Image: Switching methods for the KVM switch.

Display Modes:

The KVM switch supports two primary display modes for your dual monitor setup:

• Extended Mode: Each monitor displays a different part of your desktop, extending your workspace.
• Copy (Mirror) Mode: Both monitors display the same content, mirroring your desktop.

Image: Extended Mode and Copy Mode display configurations.

Image: Visual representation of Extended and Mirror (Copy) display modes.

Maintenance

• Keep the device in a cool, dry place, away from direct sunlight and extreme temperatures.
• Clean the exterior of the KVM switch with a soft, dry cloth. Avoid using liquid cleaners or abrasive materials.
• Ensure all cables are securely connected to prevent signal loss or intermittent issues.
• Avoid placing heavy objects on the KVM switch.

Troubleshooting

If you encounter issues with your EVATEK HDMI KVM Switch, please refer to the following common solutions:

• No Display/Flickering:
  • Ensure all HDMI and USB cables are firmly connected.
  • Verify that your monitors and computers support the selected resolution (e.g., 4K@60Hz).
  • Try using different HDMI cables, as cable quality can affect signal integrity.
  • Ensure the KVM switch is receiving adequate power via the 5V USB power cable.
  • If using adapters or docking stations, ensure they are reliable and compatible.
• Mouse/Keyboard Not Responding:
  • Confirm that the USB 3.0 cables from both computers are connected to the KVM switch.
  • Try connecting the mouse and keyboard to different USB 3.0 ports on the KVM switch.
  • Ensure the KVM switch is powered on.
• Connection Loss After PC Sleep:
  • Try unplugging and re-plugging the affected cables.
  • Adjust power management settings on your computer to prevent USB ports from powering down during sleep.
• Windows 11 Window Icon Arrangement Offset:
  • This can sometimes occur with KVM switches. If this issue persists, please contact EVATEK customer support for assistance.
• General Issues:
  • Restart the KVM switch and all connected computers and monitors.
  • If problems persist, refer to the warranty and support section for contact information.

Specifications

Warranty and Support

EVATEK is committed to providing excellent customer service and product support.

• Replacement Service: We offer a 24-month replacement service for quality-related issues.
• After-Sales Support: Enjoy 365 days of dedicated after-sales support.
• Online Customer Service: Our online customer service is available 24 hours to assist with any problems or inquiries.
• Contact: For technical assistance or warranty claims, please contact our professional technical team through the retailer's platform or the official EVATEK website.

Image: EVATEK Customer Support Information.