PHILIPS 586420
PHILIPS Plug and Play 32W Equivalent 48 in. Cool White Type A T8/T12 LED Tube Light Bulb (10-Pack)
Instruction Manual
Product Overview
The PHILIPS Plug and Play LED Tube Light Bulbs are designed to provide bright, efficient illumination for various spaces such as kitchens, garages, workshops, and basements. These TLED tubes are engineered for instant-on performance without flickering or wavering, making them ideal for general use or task lighting in both residential and commercial environments.
Key features include:
- Compatibility with most electronic and magnetic ballasts, simplifying replacement of T8 and T12 linear fluorescent bulbs.
- Energy efficiency, offering up to 40% savings on electricity bills compared to traditional fluorescent bulbs.
- Long lifespan, reducing the frequency of bulb changes, especially in hard-to-reach areas.
- Designed to meet Philips EyeComfort requirements for reduced eye strain, addressing flicker, strobe, glare, color rendition, and dimming effects.
- Mercury-free operation and reliable performance in cold temperatures.
Setup and Installation
These Philips LED tubes are designed for straightforward 'Plug and Play' installation, directly replacing existing T8 and T12 linear fluorescent bulbs without requiring ballast bypass or rewiring in most compatible fixtures.
Image: Installation of a Philips T8/T12 LED tube. This image demonstrates the simple plug-and-play method, showing the tube being inserted into a standard fluorescent fixture. The design ensures compatibility with most existing electronic and magnetic ballasts, making the transition from fluorescent to LED seamless.
Image: Detailed view of the replacement process. The top panel illustrates the 'Plug and Play' installation, where the LED tube is directly inserted into the fixture's sockets. The bottom panel confirms that the tubes work with most electronic and magnetic ballasts, eliminating the need for complex electrical modifications.
Installation Steps:
- Safety First: Before beginning installation, ensure the power to the fixture is turned off at the circuit breaker to prevent electrical shock.
- Remove Old Bulb: Carefully remove the existing T8 or T12 fluorescent tube from the fixture.
- Insert LED Tube: Align the pins of the Philips LED tube with the sockets in the fixture. Gently push and twist the tube into place until it is securely seated.
- Restore Power: Once the LED tube is securely installed, restore power to the fixture from the circuit breaker.
- Test: Turn on the light switch to confirm proper operation.
Note on Compatibility: While these tubes are designed for broad compatibility, some older or non-standard ballasts may not be compatible. If the bulb does not light up or flickers, consult the troubleshooting section.
Operating Instructions
Once installed, the Philips LED tube operates like a standard fluorescent bulb. Simply use the existing light switch to turn the fixture on or off. The LED tubes provide instant full brightness without any warm-up time or flickering.
These bulbs are designed for consistent performance and maintain their specified brightness and color temperature throughout their lifespan.
Maintenance
Philips LED tubes require minimal maintenance. Due to their long lifespan, frequent replacement is not necessary. To clean the tubes, ensure the power is off and the bulb is cool. Gently wipe the surface with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
Troubleshooting
If you encounter issues with your Philips LED tube, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Bulb does not light up. | No power to the fixture, incompatible ballast, or loose connection. | Check circuit breaker. Ensure the bulb is securely seated. Verify ballast compatibility (some older or non-standard ballasts may not work). If the ballast is known to be faulty or very old, consider replacing the fixture or consulting an electrician. |
| Bulb flickers or dims. | Incompatible ballast, unstable power supply, or damaged bulb. | Confirm ballast compatibility. Ensure stable power supply to the fixture. If flickering persists, the bulb may be damaged; replace with a new one. |
| Light output is lower than expected. | Incorrect bulb type for fixture, or environmental factors. | Ensure you have the correct wattage and lumen output bulb for your needs. Verify the fixture is clean and not obstructing light. |
| Bulb makes a buzzing noise. | Incompatible or failing ballast. | This is typically a ballast issue. If the noise is bothersome, consider replacing the ballast or the entire fixture. |
If troubleshooting steps do not resolve the issue, please contact Philips customer support or consult a qualified electrician.
Specifications
Image: Product dimensions and key specifications. This visual aid clearly shows the 48-inch length and 1.1-inch diameter of the LED tube. It also highlights important performance metrics such as 1800 lumens brightness, 16 watts power consumption, compatibility with T8/T12 fixtures, and a 4000 Kelvin Cool White color temperature.
Image: Range of compatible Philips LED tubes. This image displays various color temperature options available for Philips T8/T12 LED tubes, including 3000K Bright White, 4000K Cool White (this product), and 5000K Daylight. It emphasizes that these are Philips Type A Plug and Play LED tubes, compatible with most electronic and magnetic ballasts.
| Specification | Value |
|---|---|
| Brand | PHILIPS |
| Model Name | 16T8/LED/48-840/UF18/G 5/2 FB (Model Number: 586420) |
| Light Type | LED |
| Wattage | 16 watts (32W Equivalent) |
| Brightness | 1800 Lumen |
| Color Temperature | 4000 Kelvin (Cool White) |
| Bulb Shape Size | T8 |
| Bulb Base | G13 |
| Voltage | 40 Volts |
| Unit Count | 10.0 Count |
| Material | Glass |
| Color Rendering Index (CRI) | 80 |
| Item Weight | 6.89 pounds (for 10-pack) |
| Package Dimensions | 48.5 x 6.5 x 3 inches |
| Country of Origin | China |
| Global Trade Identification Number (GTIN) | 50046677586428 |
Warranty Information
This PHILIPS LED Tube Light Bulb (10-Pack) is covered by a 2-year manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
For detailed warranty terms and conditions, please refer to the documentation included with your product or visit the official Philips lighting website.
Customer Support
For further assistance, technical support, or to inquire about product information, please visit the official Philips Lighting website or contact their customer service department. You can often find support resources, FAQs, and contact information on the brand's dedicated product pages.
Visit the PHILIPS Store on Amazon for more products and information.