15170-001 LED Indicator Integrated Tactile Trim Tab Switch Kit User Manual

1. Product Overview

The sixcow 15170-001 LED Indicator Integrated Tactile Switch Kit is designed as a replacement part for Lenco Marine Single Actuator Systems. This advanced switch kit integrates control box functionality directly into the keypad bezel, offering enhanced accuracy and ease of use. It features high-intensity LED indicators that provide real-time trim tab position feedback, a backlit keypad for night viewing, and a photo eye sensor that adjusts indicator intensity based on ambient light conditions for optimal visibility.

Image 1.1: Overview of the 15170-001 LED Indicator Integrated Tactile Switch Kit, highlighting its compatibility with Lenco Marine Single Actuator Trim Tabs.

2. What's in the Box

• 15170-001 LED Indicator Integrated Tactile Switch Kit

The kit includes the integrated keypad with its wiring harness and power pigtail, ready for installation.

3. Key Features

• Compatibility: Specifically designed for Lenco Marine Single Actuator Trim Tabs, including standard and HD performance models.
• Advanced LED Indicators: Equipped with two high-intensity LED indicators for precise and clear feedback on trim tab positions at all times.
• Integrated Control Box Functionality: Enhances overall accuracy and control by integrating the control box into the keypad bezel.
• User-Friendly Design: Features a built-in retractor for automatic neutral positioning and a photo eye sensor that adjusts LED intensity based on ambient light.
• Backlit Keypad: Provides enhanced visibility for effortless operation during nighttime conditions.
• Plug & Play Installation: Designed for straightforward and quick installation with waterproof Deutsch connectors.

Image 3.1: Close-up view of the upgraded LED indicators, showing precise trim tab position feedback.

Image 3.2: Illustration of the user-friendly design, highlighting the built-in retractor, photo eye sensor, and backlit keypad for optimal operation in various lighting conditions.

4. Setup and Installation

Follow these steps for proper installation of your 15170-001 LED Indicator Integrated Tactile Switch Kit:

1. Prepare Helm: At the helm, determine the ideal location for the tactile keypad. Use the supplied switch template to mark the cut-out area. Ensure the area behind the helm is clear of any wires or equipment that could be damaged during cutting.
2. Cut Opening: Using a 2 1/16” (5.24 cm) hole saw, carefully cut a circular opening at the marked location. The hole must be precisely 2 1/16” in diameter.
3. Install Keypad: Place the keypad and its wiring into the newly cut 2 1/16” hole. Feed the wires through the bezel nut. Hand-tighten the keypad's bezel nut onto the backside of the helm to secure the unit.
4. Connect Wiring Harnesses: Connect the main wiring harnesses. The system uses waterproof Plug & Play Deutsch connectors for easy and secure connections.
5. Connect Retractor Wire (Orange): Each switch kit includes an orange retractor wire. This wire must be connected to an on/off power source. This connection ensures that the trim tabs retract to the up position when power or an analog signal is removed, and then shuts the system down into stand-by mode. Important: Do not install the orange wire and the main power on the same mechanical switch.

Image 4.1: Visual guide for installation, showing the cut-out view, required tools (power drill, 2 1/16" hole saw), and a diagram of the keypad and wiring.

Image 4.2: Detailed wiring diagram illustrating connections for the actuator extension, flybridge cable, circuit breaker, key switch, and the critical orange retractor wire for 12 & 24 Volt systems.

Image 4.3: Demonstration of connecting the Plug & Play Deutsch connectors, ensuring a secure and waterproof connection.

5. Operation

Operating the 15170-001 LED Indicator Integrated Tactile Switch Kit is intuitive:

• Trim Tab Control: Use the 'UP' and 'DOWN' buttons for each trim tab (Bow and Stern, or Port and Starboard depending on configuration) to adjust their position.
• LED Indicators: The two high-intensity LED displays on the keypad will show the exact position of your trim tabs in real-time. Observe these indicators to achieve the desired trim.
• Automatic Brightness Adjustment: The integrated photo eye sensor automatically reads ambient light conditions and adjusts the intensity of the LED indicators for optimum viewing, whether in bright daylight or low-light environments.
• Night Viewing: The backlit keypad automatically illuminates the graphics, ensuring clear visibility and easy operation during night use.
• Instant Response: The tactile switch technology provides an instant response to commands, allowing for precise adjustments.
• Built-in Retractor: When the power to the orange retractor wire is removed, the system automatically retracts the tabs to the up position and enters stand-by mode.

6. Maintenance

To ensure the longevity and optimal performance of your sixcow 15170-001 LED Indicator Integrated Tactile Trim Tab Switch Kit, consider the following general maintenance guidelines:

• Regular Cleaning: Periodically wipe down the keypad surface with a soft, damp cloth to remove salt residue, dirt, and grime. Avoid abrasive cleaners or solvents that could damage the finish or electronics.
• Inspect Connections: Annually or bi-annually, inspect all wiring connections, especially the Deutsch connectors, to ensure they are secure and free from corrosion. While the connectors are waterproof, ensuring a tight seal is crucial for marine environments.
• Check for Damage: Visually inspect the keypad and wiring for any signs of physical damage, cracks, or frayed wires. Address any issues promptly to prevent further complications.
• Keep Dry: Although designed for marine use, minimizing prolonged exposure to direct water spray when not in use can help preserve the unit. Ensure the mounting area remains sealed to prevent water ingress behind the helm.

7. Troubleshooting

If you encounter issues with your 15170-001 LED Indicator Integrated Tactile Trim Tab Switch Kit, refer to the following common problems and solutions:

If these troubleshooting steps do not resolve the issue, please contact sixcow customer support for assistance.

8. Specifications

Detailed technical specifications for the 15170-001 LED Indicator Integrated Tactile Trim Tab Switch Kit:

Image 8.1: Diagram illustrating the physical dimensions of the keypad and wiring components, including lengths and clearances.

9. Warranty and Support

Your satisfaction is a priority for sixcow. All sixcow products, including the 15170-001 LED Indicator Integrated Tactile Trim Tab Switch Kit, are backed by a comprehensive warranty and support policy:

• 30-Day Money-Back Guarantee: If you are not completely satisfied with your purchase, you may return it within 30 days for a full refund.
• 12-Month Warranty: The product is covered by a 12-month warranty for quality-related issues. This warranty covers defects in materials and workmanship under normal use.

For warranty claims, technical support, or any inquiries regarding your product, please contact sixcow customer service through the retailer where you purchased the item or visit the official sixcow website for contact information.