Aulaidik Light Therapy Lamp Instruction Manual

Introduction

Welcome to your new Aulaidik Light Therapy Lamp. This manual provides essential information for the safe operation, assembly, and maintenance of your 3-in-1 therapy lamp. Please read these instructions thoroughly before use and retain them for future reference.

Important Safety Instructions

• Read all instructions before using the appliance.
• Do not use this lamp near water or in excessively humid environments.
• Unplug the lamp from the outlet when not in use or before cleaning.
• Do not operate the lamp with a damaged cord or plug. If the lamp malfunctions or is damaged, discontinue use and contact customer support.
• Keep the cord away from heated surfaces.
• Do not block the light output or cover the lamp during operation.
• This lamp is for indoor use only.
• Avoid direct eye contact with the light for prolonged periods, especially at maximum brightness.

Package Contents

Image description: A diagram illustrating the components included in the package, such as the RF remote control, three detachable poles, UL certified plug, stable base, clamp, and LED light source.

Please verify all components are present in your package:

• RF Remote Control
• Detachable Poles (x3)
• UL Certified Plug
• Stable Base
• Clamp
• LED Light Source (Lamp Head)

Assembly Instructions

Image description: A four-step visual guide demonstrating the assembly process of the lamp, from connecting poles to securing the lamp head and plugging in the power.

Follow these steps to assemble your Aulaidik Light Therapy Lamp:

1. Assemble Poles: Attach pole 1 to pole 2 by twisting them together clockwise. Repeat this process for all detachable poles to form the main lamp post.
2. Connect to Base: Connect the assembled pole to the stable base, ensuring it is securely fastened by twisting clockwise until tight.
3. Attach Lamp Head: Secure the LED light source (lamp head) firmly onto the top of the lamp post.
4. Power Connection: Plug the DC connector into the power socket located on the back of the control panel on the lamp post. Then, connect the UL certified plug to a standard wall power outlet.

The lamp offers a versatile 3-in-1 design, allowing it to be configured as a floor lamp, desk lamp, or table clamp lamp. Use the provided clamp for desk or table mounting as needed.

Image description: This image displays the lamp in its three configurations: as a floor lamp next to a chair, as a clamp lamp attached to a desk where a person is working, and as a desk lamp on a bedside table.

Operating Instructions

Control Panel and Remote Control

The lamp can be controlled via the touch panel located on the lamp post or using the included RF remote control. The RF remote control utilizes advanced technology, allowing operation from any angle without requiring direct line of sight to the lamp.

Image description: A detailed diagram highlighting the functions of both the lamp's touch control panel and the remote control, including buttons for power, brightness adjustment, color temperature selection, and timer settings.

Power On/Off

• Short press the power button on the touch panel or the remote control to turn the lamp on or off.

Brightness Adjustment

• 10 Levels: Short press the brightness +/- buttons on the touch panel or remote control to cycle through 10 adjustable brightness levels (10% to 100%).
• Stepless Dimming: Long press the brightness +/- buttons for continuous, stepless dimming to achieve your desired light intensity.

Color Temperature Adjustment

• Short press the mode/timing button on the touch panel or the color temperature +/- buttons on the remote control to cycle through 5 distinct color temperatures: 3000K (Warm White), 3500K, 4000K (Neutral White), 5000K, and 6500K (Cool White).

Image description: This image illustrates the range of 5 color temperatures (3000K to 6000K) and 10 brightness settings (10% to 100%) available on the lamp.

Timer Function

• Touch Panel: Long press the mode/timing button on the touch panel to activate the timer function.
• Remote Control: Use the dedicated 1H or 2H buttons on the remote control to set a 1-hour or 2-hour automatic shut-off timer.
• Indicator Light: The indicator light on the lamp post will illuminate PURPLE for a 1-hour timer and RED for a 2-hour timer, allowing you to confirm the active timer setting.

Image description: A diagram explaining the newly upgraded timing function, showing how the indicator light color (Blue, Purple, Red) corresponds to power status and 1-hour or 2-hour timer settings.

Memory Function

The lamp is equipped with a memory function that automatically saves your last used brightness and color temperature settings. When the lamp is turned on again, it will resume operation with these previous settings.

Pre-set Modes (Remote Control Only)

The remote control includes dedicated buttons for various pre-set lighting modes, optimized for different activities:

• Leisure Mode
• Working Mode
• Reading Mode
• Breastfeeding Mode
• Night Light Mode

Usage Guidelines for Light Therapy

This lamp provides 11000 Lux of UV-free, full-spectrum light, designed to mimic natural sunlight. It can be beneficial for adjusting mood, improving sleep quality, and enhancing focus, particularly during periods of reduced natural light.

For effective light therapy, it is generally recommended to use the lamp for at least 20-30 minutes daily. Position the lamp to ensure the light reaches your eyes indirectly, avoiding staring directly into the light source. The optimal distance and duration may vary based on individual needs and light sensitivity.

Image description: A person is shown relaxing on a couch with the light therapy lamp providing illumination, demonstrating a typical use case for light therapy.

Maintenance

To ensure the longevity and optimal performance of your Aulaidik Light Therapy Lamp, follow these maintenance guidelines:

• Cleaning: Always unplug the lamp from the power outlet before cleaning. Wipe the lamp and the light panel with a soft, dry, lint-free cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electronic components.
• Storage: If storing the lamp for an extended period, ensure it is clean, dry, and stored in a cool, dry place away from direct sunlight and extreme temperatures.
• Bulb Replacement: The LED light source is integrated and not user-replaceable. Do not attempt to open the lamp head.

Troubleshooting

If you encounter any issues with your Aulaidik Light Therapy Lamp, please refer to the following common troubleshooting steps:

• Lamp not turning on:
  • Ensure the power cord is securely plugged into both the lamp's DC connector and a functional wall outlet.
  • Check if the wall outlet is receiving power by testing it with another appliance.
• Remote control not working:
  • Verify that the batteries in the remote control are correctly inserted and not depleted. Replace batteries if necessary.
  • Ensure there are no physical obstructions between the remote control and the lamp.
• Light flickering or inconsistent brightness:
  • Unplug the lamp from the power outlet, wait for approximately 30 seconds, and then plug it back in. This can reset the internal electronics.
  • If the issue persists, contact customer support for further assistance.
• Lamp unstable in floor lamp configuration:
  • Ensure all pole connections are tightly secured to the base and to each other.
  • Place the lamp on a flat, stable surface.

If these steps do not resolve the issue, please contact Aulaidik customer support.

Specifications

Warranty and Support

For detailed warranty information, technical support, or any inquiries regarding your Aulaidik Light Therapy Lamp, please refer to the warranty card included with your purchase or visit the official Aulaidik website. Our customer service team is available to assist you with any questions or concerns.