Generic Titanium Alloy Silicone Ingrown Toenail Treatment Manual

Product Overview

The Titanium Alloy Silicone Ingrown Toenail Treatment is designed for individuals experiencing ingrown, curled, or deformed nails. This innovative patch utilizes memory-type titanium alloy and silicone to provide an upward pulling force, helping to correct nail growth. It is designed for strong adhesion, reusability, and can be cut to fit various nail sizes, making it suitable for both fingernails and toenails across different age groups.

Image: Overview of the Titanium Alloy Silicone Ingrown Toenail Treatment kit, illustrating the correction process and included components.

The product is engineered for continuous correction, meaning it does not require regular replacement and can be worn during daily activities such as exercise, bathing, or walking without affecting its performance. Its elastic function helps to gradually restore nails to a healthy state.

Safety Information

• For external use only.
• If you are not skilled in application, you may not be able to stick the patch effectively. Consult customer service if needed.
• Nails that are very curved and thick (Onychomycosis) cannot be used.
• Inflammation and bleeding of the nail groove are prohibited.
• It is best to use after soaking feet, as the effect is better.
• It is recommended that you replace the patch once a month.
• Keep out of the reach of infants.
• For circulation disorders or diabetic patients, please consult a professional doctor before use.
• Observe for 2 hours after applying. If you feel uncomfortable, adjust or remove it in time.
• Do not exercise vigorously within 24 hours of application.
• If glue is accidentally smeared on your hands or other parts, do not be nervous. Do not wipe with your hands or paper towels. Apply the thinner to the place where the glue is, wait about 2 minutes, and gently scrub the glue with your hands.

Setup and Preparation

Before applying the correction patch, ensure your nails are properly prepared.

1. Gather All Accessories: Ensure you have all components of the kit: titanium alloy silicone patches (various lengths), nail glue, dispergator, alcohol pads, assisting patches, and a nail frosted bar.


Image: A complete set of accessories for the ingrown toenail treatment, laid out on a surface.

2. Clean the Nail: Use the provided alcohol pads to thoroughly clean the affected nail and surrounding area. Ensure the nail is dry before proceeding.
3. Roughen the Nail Surface: Gently use the nail frosted bar to roughen the surface of the nail where the patch will be applied. This improves adhesion.
4. Select and Cut Patch: Choose a titanium alloy silicone patch of appropriate length. The patches are cuttable to fit any nail size.

Operating Instructions

Follow these steps for effective application of the ingrown toenail correction patch:

1. Prepare the Assisting Patch: Take an assisting patch and place the chosen titanium alloy silicone patch onto it.
2. Apply Glue to One End: Apply a thin layer of nail glue to one end of the titanium alloy silicone patch while it is on the assisting patch.


Image: Detailed view of applying nail glue to the textured side of the correction patch.

3. Position on Nail: Carefully place the glued end of the patch onto the ingrown side of your toenail. Press down firmly for 15-20 seconds to secure it.
4. Apply Glue to Other End: Once the first end is secure, apply glue to the other end of the patch and press it onto the opposite side of the nail for 15-20 seconds.
5. Reinforce with Glue: Apply a small amount of glue around the edges of the entire patch to ensure maximum adhesion and durability.


Image: Step-by-step visual guide for easy and fast application of the correction patch.

6. Remove Assisting Patch: Gently tear off the assisting patch once the correction patch is firmly in place.
7. Wait for Solidification: Allow the glue to solidify for approximately 10 minutes before exposing the foot to water or washing.

Video Guides for Application:

The titanium alloy material is adaptive to the curvature of nails, providing a dual-effect elastic function that helps to pull back ingrown nails. It can rebound tens of thousands of times and bend 180 degrees without deformation.

Image: Examples of the correction patch applied to different types of ingrown nails, showing its adaptability.

Maintenance

• The correction patches are reusable.
• No need for regular replacement; the patch can be used until the nails grow normally.
• If the patch needs to be removed, use the dispergator to dissolve the glue. Apply the dispergator to the glued area, wait approximately 2 minutes, and gently scrub the glue with your hands to remove it.

Troubleshooting

• Patch Not Sticking: Ensure the nail surface is thoroughly cleaned with alcohol pads and roughened with the nail frosted bar before application. Applying the patch after soaking feet can also improve adhesion.
• Discomfort After Application: Observe for 2 hours after applying. If you experience discomfort, adjust the patch's position or remove it. Avoid vigorous exercise for 24 hours post-application.
• Glue on Skin: If nail glue accidentally gets on your skin, apply the dispergator to the area, wait about 2 minutes, and gently scrub to remove.
• Persistent Problems: If you have severe ingrown nail issues, inflammation, bleeding, or are a diabetic patient, consult a professional doctor for guidance before using this product.

Specifications

• Package Dimensions: 4.72 x 2.8 x 0.83 inches
• Item Weight: 1.76 ounces
• Brand: Generic
• Item Form: Liquid (referring to glue/dispergator)
• Specialty: Ingrown Toenail Treatment
• Number of Items: 1 kit
• Unit Count: 5 Count (referring to patches)
• Material: Titanium Alloy, Silicone

Warranty and Support

The manufacturer is committed to customer satisfaction. If you experience any issues with your Titanium Alloy Silicone Ingrown Toenail Treatment, a dedicated support team is available to assist you promptly. Please refer to the product packaging or included instructions for specific contact information for customer service.