Introduction
This manual provides detailed instructions for the safe and effective operation of your MQUPIN 18 Egg Incubator. Please read this manual thoroughly before use to ensure optimal performance and successful hatching results. This incubator is designed for hatching various poultry eggs, including chicken, duck, quail, and goose eggs, with features like automatic egg turning, humidity control, and a built-in egg candler.
Image: The MQUPIN 18 Egg Incubator, showcasing its transparent dome and user-friendly digital control panel.
Product Features
- Automatic Egg Turning: Mimics natural hen behavior with adjustable turning intervals (60, 120, or 180 minutes) to prevent embryo sticking and promote healthy development. Automatically stops 3 days before hatching.
- Automatic Temperature and Humidity Control: Maintains optimal temperature (68–104°F) and humidity (40-80%) with a clear digital display and instant alarms for deviations.
- Dual-Size Egg Trays: Includes a standard tray for 18 chicken eggs and a larger tray for up to 8 goose or duck eggs, offering versatility for different egg sizes.
- 360° Clear View Window: Allows observation of the hatching process without opening the lid, maintaining stable internal conditions.
- Built-in LED Egg Candler: Facilitates easy checking of egg development and early removal of non-viable eggs.
- Advanced Airflow System: Ensures balanced warm and cool air distribution to eliminate hot and cold spots.
Package Contents
Verify that all components are present in the package:
- MQUPIN Egg Incubator Unit
- 18-Egg Tray (for chicken/quail eggs)
- 8-Egg Tray (for larger goose/duck/turkey eggs)
- Power Supply Cord
- Cleaning Brush
- Spray Pot (Water Bottles)
- User Manual (this document)
Image: An illustration detailing the MQUPIN incubator unit, two egg trays, power supply, cleaning brush, spray pot, and user manual.
Setup
- Choose a Stable Location: Place the incubator on a flat, stable surface away from direct sunlight, drafts, and heating/cooling vents. Ensure the room temperature is stable.
- Assemble Egg Trays: Select the appropriate egg tray (18-cell for standard eggs like chicken/quail, or 8-cell for larger eggs like goose/duck) and place it inside the incubator base.
- Connect Power: Plug the power supply cord into the incubator and then into a suitable electrical outlet.
- Pre-Run Verification: Before placing eggs, run the incubator empty for 24 hours to verify that the temperature and humidity settings are stable and accurate.
- Install Water Container: Install the water container in Area B even without water to prevent internal humidity leakage. Refer to the humidity control section for filling instructions.
Image: Comparison of the 18-cell tray for chicken/quail eggs and the 8-cell tray for larger duck/goose/turkey eggs.
Operating Instructions
Control Panel Overview
Image: The incubator's control panel, detailing the digital displays for temperature, humidity, hatching days, and egg turning countdown, alongside the function buttons.
- Temperature Display: Shows current internal temperature. Switchable between °C/°F.
- Humidity Display: Shows current internal humidity percentage.
- Hatching Days Display: Tracks the number of incubation days.
- Egg Turning Countdown: Indicates time until the next automatic egg turn.
- Buttons: Used for setting temperature, hatch days, egg turning interval, and unit reset.
Temperature Control
The incubator automatically maintains a temperature range of 68–104°F. You can set your desired temperature using the control panel. An alarm will notify you of any significant temperature deviations (±2°F).
Image: The advanced airflow system ensures uniform temperature distribution, preventing hot and cold spots.
Humidity Control
The system automatically maintains humidity between 40-80%. Water can be added through designated ports without opening the lid. An alarm will sound if humidity falls below 40%.
- For the first 18 days of incubation, add water into Port A.
- For the final 3 days (lockdown period), increase humidity to 65-75% by adding water into both Port A and Port B.
Image: The automatic humidity control system, showing water input ports A and B, and the air vent control for adjusting humidity levels.
Image: Visual guide for adding water to the incubator: Port A for initial incubation, and both Ports A and B for the final hatching days to increase humidity.
Automatic Egg Turning
The incubator features an automatic egg turning system. You can select turning intervals of 60, 120, or 180 minutes. The system will automatically stop turning eggs 3 days before the expected hatch date.
Image: The automatic egg turning mechanism, highlighting the selectable turning intervals and a visual timeline of egg development from day 1 to hatching.
Egg Candling
Use the built-in LED egg candler to observe the development of the embryos. This allows you to identify and remove infertile or non-developing eggs early, maximizing the chances for viable eggs.
- Day 5-6: Select fertilized eggs.
- Day 11-12: Check egg development.
- Day 16-17: Check egg embryo development.
Image: A user demonstrating the built-in egg candler to check embryo development, with a visual guide for checking at different stages.
Maintenance
- Cleaning: After each hatch, remove any eggshells or debris. Disinfect the incubator thoroughly to prevent bacterial growth. The egg trays are removable for easy cleaning under running water.
- Storage: When not in use, ensure the incubator is clean and dry. Store it in a cool, dry place away from direct sunlight.
Image: Demonstrates cleaning the egg tray under running water and wiping the incubator unit with a clean cloth.
Troubleshooting
- Low Humidity: If humidity is consistently low, ensure the lid is properly locked, all ventilation vents are closed, and the water container in Area B is installed (even if empty to prevent leakage). Avoid placing the incubator in overly ventilated areas. You may also try covering small holes on the incubator with tape to help retain humidity, as suggested by some users.
- Temperature Fluctuations: Ensure the incubator is placed in a location with stable ambient temperature, away from drafts or direct heat sources. Verify the temperature by running the incubator empty for 24 hours before use. If the display shows a high temperature but the internal temperature is low, contact support.
- Poor Hatch Rate: Ensure proper egg selection (fertile eggs), consistent temperature and humidity, and correct egg turning. Avoid opening the lid, especially after Day 18, to maintain stable conditions.
Specifications
| Feature | Detail |
|---|---|
| Model Number | P06AA006-M |
| Brand | MQUPIN |
| Item Weight | 5.59 pounds (2.54 Kilograms) |
| Item Dimensions (LxWxH) | 13.97 x 13 x 7.8 inches |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Breed Recommendation | Quail, Chicken, Duck, Goose |
| Specific Uses | Indoor |
| Special Features | Adjustable, Automatic Egg Turning Stop, Incubation Day Display, Durable, Easy Assembly |
Safety Information
- Always ensure the incubator is placed on a stable, level surface.
- Keep the incubator away from children and pets during operation.
- Do not immerse the electrical components in water.
- Unplug the incubator from the power source before cleaning or performing any maintenance.
- Use only the provided power adapter.
Warranty and Support
For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the MQUPIN official website. Keep your purchase receipt as proof of purchase.