Introduction
Thank you for choosing the Bobve 70.9” 9-Drawer Dresser. This modern chest of drawers is designed to provide spacious storage and a sleek aesthetic for your bedroom, living room, or hallway. Its handle-free design and sturdy construction ensure both functionality and durability. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure optimal use of your new furniture.
Safety Information
- Anti-Tipping Device: It is highly recommended to install the included anti-tipping device to prevent accidental tipping, especially in households with children. Follow the instructions carefully for secure wall attachment.
- Two-Person Assembly: Due to the size and weight of the components, assembly is recommended for two people to ensure safety and ease of installation.
- Gentle Handling: The dresser is made of engineered wood. Handle all parts gently during assembly and moving to prevent chipping or damage.
- Weight Limits: Do not place excessively heavy items on the dresser top or inside the drawers. Refer to the specifications for load capacity.
Package Contents
Your Bobve 9-Drawer Dresser package includes all necessary parts and hardware, along with detailed instructions. Please note that items may be shipped in two separate packages and may arrive at different times. Ensure all parts are present and undamaged before beginning assembly.
Required Tools (Not Included)
- Power Drill
- Screwdriver
- Hammer
- Utility Knife
Assembly Tips
- Lay out all components on a soft, clean surface to prevent scratches.
- Identify each part using the labels and the provided instructions.
- If items are damaged or missing upon opening, replacements can be requested using the part numbers.
Setup and Assembly
Follow these steps carefully to assemble your Bobve 9-Drawer Dresser. Refer to the detailed assembly video for visual guidance.
Assembly Video Guide
General Assembly Steps (Refer to video for specific part numbers)
- Prepare Boards: Carefully unbox all components. Classify boards by type and order of use.
- Attach Sliding Rails: Secure the sliding rails (CR and CL) to the designated boards using the provided screws. Ensure they are firmly attached and aligned correctly.
- Insert Eccentric Rods: Fix eccentric rods into the pre-drilled holes on the boards.
- Assemble Frame: Connect the main frame components using eccentric wheels and corks. Ensure all connections are tight and stable.
- Install Back Panels: Secure the back panels to the assembled frame.
- Install Charging Station: Carefully place the charging station into its designated slot on the top panel and secure it with screws.
- Assemble Drawers: Construct each drawer by attaching the side panels, back panel, and bottom. Install the drawer sliding rails.
- Insert Drawers: Gently slide the assembled drawers into their respective slots in the dresser frame.
- Final Touches: Attach any protective corner pieces or aesthetic stickers as instructed.
Operating Instructions
The Bobve 9-Drawer Dresser features a unique handle-free design for a clean, modern look. To open a drawer, simply apply gentle pressure to the top or bottom edge of the drawer front and pull it outwards. To close, push the drawer firmly until it is fully seated.
The large tabletop (70.9" x 15.7") provides ample space for displaying decorative items, lamps, or other personal belongings.
Maintenance
To maintain the appearance and longevity of your dresser, simply wipe it with a dry cloth. Avoid using harsh chemicals or abrasive cleaners, as these may damage the finish.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Confusing assembly instructions | Instructions may lack clarity in certain steps. | Review the assembly video carefully for visual guidance. Take your time and ensure each step is understood before proceeding. |
| Missing or damaged parts | Shipping or manufacturing error. | Contact the seller immediately with the part numbers of the missing or damaged components for replacements. |
| Drawers are lopsided or do not close properly | Incorrect alignment of drawer slides or frame components during assembly. | Carefully check the alignment of all drawer slides and ensure they are securely fastened. Re-adjust if necessary. Ensure all eccentric wheels are properly tightened. |
| Chipping of material during assembly | Rough handling of engineered wood components. | Exercise patience and gentle handling when assembling. Avoid forcing parts together. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Bobve |
| Product Dimensions | 70.9"W x 15.7"D x 31.3"H |
| Color | Black |
| Style | Modern |
| Material | Engineered Wood |
| Number of Drawers | 9 |
| Assembly Required | Yes |
| Product Care Instructions | Wipe with Dry Cloth |
Warranty and Support
For any questions, concerns, or assistance with assembly, missing parts, or product issues, please contact Bobve customer support. We are committed to ensuring your satisfaction with our products.