1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Wallpad 2 Gang 2 Way/3 Way Control Touch Switch. This advanced touch panel switch is designed for modern electrical systems, offering reliable control for your lighting. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Figure 1: Front view of the Wallpad 2 Gang 2 Way/3 Way Control Touch Switch (White model).
2. Safety Information
WARNING: Electrical installation should only be performed by a qualified electrician. Incorrect installation can lead to electric shock, fire, or damage to the product.
- Always disconnect power at the circuit breaker before installing or servicing the switch.
- Ensure the voltage and current ratings of your electrical system are compatible with the switch specifications (110V-240V, 5A).
- Do not install in wet or damp locations.
- Do not exceed the maximum rated power of <2000W.
- Keep out of reach of children.
- If you are unsure about any part of the installation process, consult a professional electrician.
3. Package Contents
Upon opening the package, please verify that all components are present and undamaged. The standard package for the Wallpad Touch Switch typically includes:
- Wallpad 2 Gang 2 Way/3 Way Control Touch Switch unit
- Mounting screws
- User Manual (this document)
Figure 2: Wallpad Touch Switch (Gold variant shown for illustrative purposes).
4. Setup and Installation
Follow these steps carefully for proper installation. Ensure power is OFF before beginning.
4.1 Wiring Diagram Overview
The Wallpad touch switch requires specific wiring connections. Familiarize yourself with the terminal labels on the back of the switch.
Figure 3: Back of the switch with wiring terminal labels and installation dimensions.
Figure 4: Detailed view of the wiring terminals on the back of the switch.
4.2 Wiring Instructions
The switch supports 1-way, 2-way, and 3-way control configurations. Refer to the specific diagram for your desired setup.
Figure 5: Comprehensive wiring diagrams for 1-way, 2-way, and 3-way control setups.
- Disconnect Power: Turn off the main power supply at the circuit breaker before starting any wiring.
- Prepare Wires: Strip approximately 10mm of insulation from the ends of your electrical wires.
- Connect Wires:
- Connect the Live (L) wire from your power source to the "Live wire in & Communication A line" terminal.
- Connect the Neutral (N) wire (if applicable for your region/setup, though this switch primarily uses L and Load).
- Connect the Load wires (to your lights) to the "Live wires out" terminals (L1, L2, etc., depending on the number of gangs).
- For 2-way or 3-way control, connect the "Communication A line" and "Communication B line" between the switches as shown in Figure 5.
- Mount the Switch: Secure the switch into the wall box using the provided mounting screws. Ensure it is flush with the wall.
- Restore Power: Once all connections are secure and the switch is mounted, restore power at the circuit breaker.
Note: The switch base is round, and the switch size is 86x86x35mm. The installation distance for screws is typically 50mm or 60mm.
5. Operating Instructions
The Wallpad touch switch features a simple and intuitive touch interface.
- Turning On/Off: Gently touch the light icon on the glass panel to toggle the connected light circuit on or off.
- Indicator Lights: The switch has LED indicators. Typically, a green light indicates the circuit is off, and a red light indicates the circuit is on.
- Multi-Way Control: In 2-way or 3-way setups, any connected switch can control the same light circuit.
6. Maintenance
The Wallpad touch switch is designed for durability and requires minimal maintenance.
- Cleaning: To clean the glass panel, gently wipe it with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish.
- Inspection: Periodically check the switch for any signs of damage or loose connections. If any issues are found, disconnect power and consult a qualified electrician.
- No User-Serviceable Parts: The internal components of the switch are not user-serviceable. Do not attempt to open or repair the unit.
7. Troubleshooting
If you encounter issues with your Wallpad touch switch, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Switch does not respond to touch. | No power to the switch; incorrect wiring; faulty switch. | Check circuit breaker. Verify wiring connections according to Section 4. If issues persist, contact support. |
| Lights flicker or do not turn on/off reliably. | Load exceeds switch capacity; incompatible bulb type (e.g., some LED drivers); loose wiring. | Ensure total wattage is below 2000W. Check bulb compatibility. Re-check wiring connections. |
| Indicator light is off or incorrect. | No power; internal fault. | Check power supply. If power is present and light is still incorrect, the switch may be faulty. |
| Multi-way control not working. | Incorrect communication line wiring. | Carefully review Figure 5 for 2-way/3-way wiring. Ensure Communication A and B lines are correctly connected between switches. |
8. Specifications
| Feature | Specification |
|---|---|
| Product Type | 2 Gang 2 Way / 3 Way Control Touch Switch |
| Model Number | Wallpad Switch and Socket (HPS-8334562C892B544912033E40563C0DCA) |
| Current Rating | 5A |
| Voltage | 110V-250V |
| Rated Power | <2000W |
| Material | High-End Tempered Glass (Panel), Plastic (Body), Pure copper and Silver contact point (Inner) |
| Switch Type | Touch On/Off Switch |
| Standard | EU Standard Switch |
| Self Consuming Power | Less than 0.1mW |
| Switch Size | 86*86*35mm |
| LED Indicator Color | Green (Off) and Red (On) |
| Certification | CE, CCC, ROHS |