RollsTimi RT-7930

RollsTimi Men's Automatic Watch RT-7930 Instruction Manual

Model: RT-7930

Introduction

Thank you for choosing the RollsTimi RT-7930 Automatic Watch. This manual provides essential information for the proper setup, operation, and maintenance of your timepiece. Please read it carefully to ensure optimal performance and longevity of your watch.

Product Overview

The RollsTimi RT-7930 is an automatic mechanical watch featuring a reliable NH35A movement. It is designed for daily wear with a durable stainless steel case and bracelet, sapphire crystal, and 100-meter water resistance. The watch also includes a date display with magnification and luminous hands and markers for visibility in low light conditions.

RollsTimi RT-7930 watch face with green dial and date display

Front view of the RollsTimi RT-7930 automatic watch, showcasing the green dial, fluted bezel, and date window with cyclops lens.

Setup

1. Initial Winding

As an automatic watch, the RT-7930 is powered by the motion of your wrist. If the watch has stopped or has not been worn for an extended period, it may require an initial manual wind to start the movement.

  1. Unscrew the crown counter-clockwise until it is free from the case.
  2. In position 0 (fully pushed in, unscrewed), turn the crown clockwise approximately 30-40 times. This will provide enough power reserve to start the watch.
  3. The second hand should begin to move.

2. Setting Time and Date

  1. Setting the Date: Pull the crown out to position 1. Turn the crown clockwise or counter-clockwise to adjust the date. Avoid setting the date between 9 PM and 3 AM, as this is when the date change mechanism is engaged and could cause damage.
  2. Setting the Time: Pull the crown out to position 2. The second hand will stop (hacking feature). Turn the crown to set the hour and minute hands. To ensure accurate time setting, set the minute hand a few minutes past the desired time, then turn it back.
  3. Once the time and date are set, push the crown back into position 0 and screw it clockwise firmly against the case to ensure water resistance.
Close-up of RollsTimi RT-7930 watch crown and bezel

The watch crown, used for winding and setting the time and date. Ensure it is screwed down for water resistance.

3. Adjusting the Bracelet

The stainless steel bracelet features screw-in pins for link removal and adjustment. To resize the bracelet, you will need a small precision screwdriver. Unscrew the pins on the links you wish to remove or add. It is recommended to have this procedure performed by a professional watchmaker to avoid scratching the bracelet or damaging the screws.

RollsTimi RT-7930 watch clasp and bracelet

The deployment clasp and stainless steel bracelet of the RollsTimi RT-7930 watch.

Operating Your Watch

Automatic Movement (NH35A)

Your RollsTimi RT-7930 watch is equipped with a Japanese NH35A automatic movement. This movement is self-winding, meaning it gains power from the natural motion of your arm. When fully wound, it has a power reserve of approximately 41 hours. If worn daily, the watch should maintain its power reserve without manual winding.

Exhibition case back of RollsTimi RT-7930 watch showing the automatic movement

The transparent case back reveals the intricate NH35A automatic movement.

Water Resistance (100 Meters / 10 Bar)

The watch is water resistant up to 100 meters (10 ATM), making it suitable for swimming, showering, and snorkeling. However, it is not recommended for diving. Always ensure the crown is fully screwed down before exposing the watch to water. Avoid exposing the watch to hot water, steam, or sudden temperature changes, as this can compromise the seals.

Luminous Display

The hands and hour markers of your watch are coated with luminous material, allowing for readability in low-light conditions. Exposure to light will charge the luminous elements, causing them to glow in the dark.

RollsTimi RT-7930 watch with luminous hands and markers glowing in the dark

The watch dial glowing in the dark, demonstrating the luminous hands and hour markers.

Maintenance

  • Cleaning: Wipe the watch case and bracelet regularly with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, ensuring the crown is screwed down. Avoid using harsh chemicals or abrasive materials.
  • Avoid Shocks: While durable, mechanical watches are sensitive to strong impacts. Avoid dropping the watch or subjecting it to severe shocks.
  • Magnetic Fields: Keep your watch away from strong magnetic fields (e.g., speakers, refrigerators, certain electronic devices), as magnetism can affect the accuracy of the mechanical movement.
  • Temperature Extremes: Avoid exposing the watch to extreme temperatures, both hot and cold, as this can affect the lubricants and seals.
  • Servicing: For optimal performance and longevity, it is recommended to have your automatic watch serviced by a qualified watchmaker every 3-5 years. This includes cleaning, lubricating, and checking the movement and seals.

Troubleshooting

  • Watch Not Running: If the watch has stopped, manually wind it by turning the crown clockwise 30-40 times in position 0 (unscrewed). If it still does not start, ensure it is worn regularly to allow the automatic movement to self-wind.
  • Inaccurate Time: If the watch is running significantly fast or slow, it may be magnetized or require servicing. Keep it away from strong magnetic fields. If the issue persists, consult a professional watchmaker.
  • Date Not Changing: Ensure the time is set correctly, passing midnight to trigger the date change. If the date is stuck, try manually advancing it using the crown in position 1. Avoid adjusting the date between 9 PM and 3 AM.
  • Water Inside the Watch: If you notice condensation or water inside the watch, immediately take it to a professional watchmaker. This indicates a compromised seal, and prompt action is necessary to prevent further damage to the movement.

Specifications

Diagram showing dimensions and specifications of the RollsTimi RT-7930 watch

Detailed diagram illustrating the dimensions and key specifications of the RollsTimi RT-7930 watch.

FeatureSpecification
Model NumberRT-7930
MovementJapanese Automatic (NH35A)
Case MaterialStainless Steel
Case Diameter40 mm
Case Thickness12 mm
CrystalSapphire Crystal
Band MaterialStainless Steel
Band Width20 mm
Clasp TypeDeployment Clasp
Water Resistance100 Meters (10 ATM)
Weight147 Grams
Dial ColorGreen

Warranty

Your RollsTimi RT-7930 watch comes with a limited warranty. Please refer to the warranty card included with your purchase for specific terms and conditions. The warranty typically covers manufacturing defects under normal use. Damage resulting from improper handling, accidents, or unauthorized repairs is generally not covered.

Keep your proof of purchase for any warranty claims.

Support

For further assistance, technical support, or warranty inquiries, please contact RollsTimi customer service through the retailer where you purchased the watch or visit the official RollsTimi store on Amazon:

RollsTimi Official Store

© 2025 RollsTimi. All rights reserved.