Aitjunz 25-inch Modern Nightstand with Charging Station

1. Introduction

Thank you for choosing the Aitjunz 25-inch Modern Nightstand. This manual provides essential information for the safe assembly, operation, and maintenance of your new furniture. Please read these instructions carefully before beginning assembly and retain them for future reference.

This nightstand features a modern design with two storage drawers, an open shelf, and an integrated charging station for convenience.

2. Safety Information

• Weight Capacity: Do not exceed the maximum weight limits. The tabletop can support up to 130 lbs, and each drawer can support up to 20 lbs.
• Assembly: Always follow the assembly instructions precisely. It is recommended that two people assemble this product to ensure safety and ease.
• Tools: Use appropriate tools for assembly. When tightening screws, a manual screwdriver is recommended to prevent damage to components.
• Stability: Ensure the nightstand is placed on a flat, stable surface. The floor-standing base design enhances stability.
• Electrical Safety: The integrated charging station is designed for standard household use. Do not overload the outlets. Keep liquids away from the charging station.
• Children: Keep small parts and hardware away from children during assembly.

3. Package Contents

Before assembly, verify that all parts and hardware are present. If any components are missing or damaged, please contact customer support.

• Nightstand panels (top, sides, back, drawer fronts, drawer sides/backs/bottoms)
• Hardware pack (screws, dowels, cam locks, drawer slides, etc.)
• Integrated Charging Station (with 2 USB ports and 2 AC outlets)
• Power cord (4.9-foot)
• Assembly Manual

4. Assembly Instructions

Assembly typically takes 30-45 minutes with two people. All parts are labeled for easy identification. Follow the step-by-step guide provided in the included manual.

4.1 Recommended Tools (Not Included)

• Phillips Head Screwdriver
• Hammer (for dowels, if applicable)

4.2 General Assembly Steps

1. Unpack and Identify Parts: Lay out all components on a clean, soft surface to prevent scratches. Match each part to the corresponding label in the manual.
2. Assemble Frame: Attach the side panels to the top and bottom panels using the provided hardware. Ensure all connections are secure.
3. Install Drawer Slides: Secure the drawer slides to the inner side panels of the nightstand frame.
4. Assemble Drawers: Construct the two drawers by attaching the front, back, and side panels, then inserting the drawer bottoms. Install the remaining drawer slides onto the assembled drawers.
5. Insert Drawers: Carefully slide the assembled drawers into the nightstand frame.
6. Install Charging Station: Place the charging station into its designated cutout on the top surface. Connect the power cord.
7. Final Checks: Ensure all screws are tightened, and the nightstand is stable.

Image: Product dimensions and weight capacities for the Aitjunz nightstand.

Image: Detail of the two smooth-sliding storage drawers.

5. Operating Instructions

5.1 Using the Storage Drawers

The nightstand features two handle-less drawers. To open, gently pull the top edge of the drawer front. The drawers are equipped with smooth metal rails for easy operation.

5.2 Using the Charging Station

The integrated charging station includes 2 USB ports and 2 AC outlets. To use:

1. Ensure the nightstand's power cord is securely plugged into a functional wall outlet.
2. Connect your devices (smartphones, tablets, lamps, etc.) to the available USB ports or AC outlets.
3. The charging station is designed for convenient power access.

A 2.3-inch diameter cable management hole is located on the back panel to help organize cords and maintain a tidy appearance.

Image: Detail of the convenient charging station with USB ports and AC outlets.

6. Maintenance and Care

• Cleaning: Wipe the nightstand with a dry, soft cloth. Avoid using harsh chemicals or abrasive cleaners, which can damage the finish.
• Spills: Clean up spills immediately with a dry cloth to prevent staining or damage to the engineered wood.
• Sunlight: Avoid prolonged exposure to direct sunlight, which may cause fading or discoloration over time.
• Heat: Do not place hot items directly on the surface. Use coasters or protective pads.
• Electrical Components: Ensure the charging station remains dry and free from dust.

7. Troubleshooting

• Assembly Difficulties: If you encounter issues during assembly, double-check the manual's diagrams and ensure all parts are correctly oriented. Verify that you are using the correct hardware for each step.
• Wobbly Nightstand: Ensure all screws are fully tightened. If the issue persists, check that the nightstand is on a level surface.
• Drawers Not Sliding Smoothly: Check that the drawer slides are correctly installed and aligned on both the drawer and the nightstand frame. Ensure no obstructions are in the way.
• Charging Station Not Working: Verify that the nightstand's power cord is securely plugged into a live wall outlet. Test the outlet with another device. If the issue persists, contact customer support.
• Missing Parts: If any parts are missing from the package, do not attempt to assemble the product. Contact Aitjunz customer support for assistance.

8. Specifications

Image: The Aitjunz Modern Nightstand in a living room setting.

9. Warranty and Support

Aitjunz provides a warranty for this product. For specific warranty details, terms, and conditions, please refer to the documentation included with your purchase or contact Aitjunz customer support directly.

If you have any questions, require assistance with assembly, or encounter any issues with your Aitjunz nightstand, please do not hesitate to reach out to our customer support team. Your satisfaction is our top priority.

Contact Information: Please refer to your purchase receipt or the Aitjunz official website for the most current customer support contact details.