ACEBEAM Pokelit AA-Titanium Alloy Natural

ACEBEAM Pokelit AA Rechargeable Mini Flashlight Instruction Manual

Model: Pokelit AA-Titanium Alloy Natural

1. Introduction

This manual provides detailed instructions for the safe and effective use of your ACEBEAM Pokelit AA Rechargeable Mini Flashlight. Please read this manual thoroughly before operating the device and retain it for future reference.

ACEBEAM Pokelit AA Rechargeable Mini Flashlight in Titanium Alloy Natural held in a hand

The compact ACEBEAM Pokelit AA Rechargeable Mini Flashlight, showcasing its small size and titanium alloy finish.

2. Setup

2.1 Battery Installation & Charging

The Pokelit AA flashlight comes with one rechargeable battery and is also compatible with any standard AA battery type, offering versatile power options.

ACEBEAM Pokelit AA Flashlight with Type-C charging port and battery compatibility icons

The flashlight features a Type-C charging port for its customized rechargeable battery, and is also compatible with standard AA Alkaline/NiMH batteries.

To charge the included rechargeable battery, connect a Type-C USB cable to the flashlight's charging port. The charging indicator will show the charging status. Ensure the battery is inserted with the correct polarity (+/-) as indicated inside the battery compartment.

3. Operating Instructions

3.1 Power On/Off and Mode Selection

The flashlight is operated via a tactical tail switch. It features 3 primary light modes: High, Medium, and Low, with a memory function that recalls the last used mode.

ACEBEAM Pokelit AA Flashlight showing different lumen outputs for Low, Medium, High, and Strobe modes

Illustration of the flashlight's tactical tail switch and its various output modes: Low (5 lumens), Medium (150 lumens), High (1000 lumens), and Strobe (1000 lumens).

To activate the strobe mode, press the tail switch 10 times continuously. The strobe mode will not be memorized.

3.2 Performance Overview

The Pokelit AA flashlight utilizes a high-performance LED with a cool white 6500K color temperature, delivering a maximum output of 1,000 lumens and a beam distance of 105 meters.

ACEBEAM Pokelit AA High-Output EDC Flashlight with 1000 lumens max output and 114 meters max throw

The ACEBEAM Pokelit AA is a high-output EDC flashlight, capable of 1000 lumens and a 114-meter beam distance, powered by a single AA battery.

4. Maintenance

4.1 Durability Features

Constructed from super light and sturdy titanium material, the Pokelit AA is designed for resilience. It boasts an IP68 water resistance rating, allowing for submersion up to 2 meters, and 1.5 meters impact resistance, ensuring durability in various conditions.

ACEBEAM Pokelit AA Flashlight submerged in water, illustrating its IP68 waterproof rating and 1.5m impact resistance

The flashlight is rated IP68 for water resistance (submersible up to 2 meters) and has an impact resistance of 1.5 meters, making it suitable for all-weather use.

4.2 General Care

To maintain optimal performance, regularly clean the flashlight's threads and O-rings. Apply silicone grease to the O-rings periodically to prevent wear and ensure water resistance. Keep the lens clean and free from debris. Store the flashlight in a cool, dry place when not in use for extended periods.

5. Troubleshooting

5.1 Common Issues and Solutions

  • Flashlight not turning on:
    • Check battery charge level.
    • Ensure battery is inserted with correct polarity.
    • Clean battery contacts and flashlight threads.
    • Tighten the tail cap securely.
  • Light is dim or flickering:
    • Battery charge is low; recharge or replace.
    • Clean battery contacts and flashlight threads.
  • Charging issues:
    • Ensure USB cable is properly connected to both the flashlight and power source.
    • Try a different USB cable or power adapter.
    • Verify the battery is correctly inserted.

If issues persist after attempting these solutions, please contact ACEBEAM customer support.

6. Specifications

ACEBEAM Pokelit AA Titanium Alloy Natural - Technical Parameters
FeatureDetail
Model NumberPokelit AA-Titanium Alloy Natural
Special FeatureSuper Light and Sturdy Titanium Material, Rechargeable, Compatible with Any AA Battery Type, 1000 High Lumens, Two SS Body Clip, IP68
ColorTitanium Alloy Natural
Power SourceBattery Powered
Light Source TypeLED
MaterialTitanium
White Brightness1000 Lumens
Included ComponentsLanyard, O-rings x 2, Pokelit AA Titanium Flashlight (Battery Included) x 1, USB Cable, User Manual x 1
Product Dimensions0.7"D x 0.71"W x 3.73"H
Battery Cell CompositionLithium Ion
Item Weight2.4 ounces
Number of Batteries1 Lithium Ion batteries required (included)
Water Resistance LevelWaterproof (IP68)
RuntimeUp to 58 hours (on Low mode)
ManufacturerACEBEAM
Technical parameter table for ACEBEAM Pokelit AA flashlight showing High, Mid, Low, and Strobe modes with lumens, runtime, beam distance, and intensity.

Detailed technical parameters including lumen output, runtime, and beam distance for each mode.

ACEBEAM Pokelit AA Flashlight next to a mobile phone for size comparison, showing dimensions.

The compact size of the Pokelit AA Titanium flashlight, with detailed dimensions for length, head diameter, body diameter, and weight.

7. Warranty and Support

The ACEBEAM Pokelit AA Rechargeable Mini Flashlight is covered by a 5-year warranty. This warranty covers defects in materials and workmanship under normal use. For warranty claims or technical support, please contact ACEBEAM customer service through their official website or the retailer from whom the product was purchased.

Please retain your proof of purchase for warranty validation.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.