MIWEN X8 Pro

MIWEN X8 Pro Electric Scooter User Manual

Model: X8 Pro | Brand: MIWEN

1. Introduction and Overview

This manual provides essential information for the safe and efficient operation of your MIWEN X8 Pro Electric Scooter. Please read it thoroughly before first use and retain it for future reference.

The MIWEN X8 Pro is designed for urban commuting and short-distance travel, featuring a 350W motor, a maximum speed of 25 km/h, and a range of up to 30 km. It is equipped with 8.5-inch tires, an app control system, and a foldable design for portability.

2. Safety Instructions

Your safety is paramount. Always adhere to the following guidelines:

  • Always wear a helmet and other protective gear, such as knee and elbow pads, when riding.
  • Ensure the scooter is fully charged and all components are securely fastened before each ride.
  • Do not ride in heavy rain or through puddles deeper than 2 cm.
  • Observe local traffic laws and regulations.
  • The maximum weight capacity for this scooter is 120 kg. Do not exceed this limit.
  • Avoid sudden braking or sharp turns at high speeds.
  • Maintain a safe distance from other vehicles and pedestrians.
Line drawings illustrating safe riding practices and protective gear for electric scooter users.

Image: Essential safety guidelines for scooter operation, including wearing a helmet and avoiding wet conditions.

3. Package Contents

Upon unpacking, please verify that all items are present:

  • MIWEN X8 Pro Electric Scooter
  • User Manual
  • Assembly Tool Kit
  • Power Adapter for Charging

4. Setup and Assembly

4.1 Unfolding the Scooter

  1. Place the scooter on a flat surface.
  2. Release the folding latch located near the base of the handlebar stem.
  3. Carefully lift the handlebar stem until it locks into the upright position. Ensure the locking mechanism is fully engaged.
Image showing the three-step folding mechanism of the electric scooter.

Image: Quick folding in 3 steps for easy transport and storage.

4.2 Charging the Battery

Before first use, fully charge the scooter for 4-6 hours. Subsequent charges typically take 4 hours.

  1. Locate the charging port on the side of the scooter deck.
  2. Open the protective cover.
  3. Connect the power adapter to the charging port, then plug it into a power outlet.
  4. The indicator light on the charger will change (e.g., from red to green) when charging is complete.
  5. Disconnect the charger and close the protective cover.

Video: Demonstrates various features including charging, folding, and riding modes.

4.3 App Connection

Enhance your riding experience by connecting to the dedicated mobile application:

  1. Download the 'Simply Connect' app from your smartphone's app store.
  2. Ensure your scooter is powered on and Bluetooth is enabled on your phone.
  3. Open the app and follow the on-screen instructions to pair with your MIWEN X8 Pro.
  4. The app allows you to lock/unlock, control headlights, activate cruise control, view riding mileage, and adjust gears.
Image showing a user interacting with the scooter's smart app control interface.

Image: Smart App Control for easy management of scooter functions.

5. Operating Instructions

5.1 Power On/Off

Press and hold the power button on the handlebar display to turn the scooter on or off.

5.2 Riding Modes and Speed Control

The scooter features multiple riding modes. Use the control panel or app to switch between them. Gently press the accelerator with your thumb to increase speed.

Close-up of the scooter's LED display showing speed, mileage, battery, and gear indicators.

Image: LED display showing current speed, mileage, battery level, and selected gear.

5.3 Braking System

The MIWEN X8 Pro is equipped with a dual braking system (EABS + rear disc brake) for effective stopping power. Apply the brake lever gently to slow down or firmly for emergency stops.

5.4 Cruise Control

Activate cruise control via the app or control panel for consistent speed on long rides. Deactivate by applying the brake or accelerator.

6. Maintenance

6.1 Tire Care

The scooter uses 8.5-inch honeycomb shock-absorbing solid tires, which are maintenance-free and resistant to punctures. Regularly inspect them for wear and tear.

6.2 Battery Care

To prolong battery life, avoid fully discharging the battery frequently. Charge it regularly, even if not in use for extended periods. Store the scooter in a cool, dry place.

6.3 General Cleaning

Wipe the scooter with a damp cloth to remove dirt. Do not use high-pressure water jets or corrosive cleaning agents.

7. Troubleshooting

If you encounter issues, please refer to the following common solutions:

  • Scooter not turning on: Ensure the battery is charged. Check all cable connections.
  • Loss of power/reduced range: This may indicate a low battery. Charge the scooter fully. Performance can also be affected by user weight, terrain, and temperature.
  • App connectivity issues: Ensure Bluetooth is enabled and the scooter is within range. Try restarting both the scooter and your phone.
  • Brakes not responding: Check the brake lever and disc brake mechanism for any obstructions or damage. If issues persist, contact support.

8. Specifications

FeatureSpecification
Motor Power350W
Battery Capacity36V 10Ah
Max Speed25 km/h
Max Range20-30 km (depending on conditions)
Wheel Size8.5 Inch (Solid Honeycomb Tires)
Max Load120 kg
Charging Time4-6 Hours
Braking SystemEABS + Rear Disc Brake
Special FeaturesCruise Control, Digital Display, Foldable Design, App Control
Frame MaterialAluminum
Image displaying key specifications of the electric scooter including motor, battery, and range.

Image: Overview of scooter specifications.

9. Warranty and Support

Your MIWEN X8 Pro Electric Scooter comes with a 1-year limited warranty. For warranty claims, technical support, or any questions not covered in this manual, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.