Vego garden Soil-Saving Intermediate Floor Instruction Manual

Product Overview

The Vego garden Soil-Saving Intermediate Floor is an accessory designed for 32-inch tall Vego garden Modern Garden Beds. Its primary function is to reduce the amount of soil required to fill these tall garden beds, making gardening more economical and efficient.

By raising the effective soil filling plane from 32 inches to 12 inches, this intermediate floor can decrease the necessary soil volume by approximately 60%, while still providing adequate root depth for most plants. It is constructed from galvanized steel with a double-sided powder coating, matching the durability and aesthetic of Vego garden beds.

Image: The Vego garden Soil-Saving Intermediate Floor shown installed within a raised garden bed, demonstrating its position above the base.

Package Contents

Before beginning assembly, please verify that all components listed below are present in your package. The garden bed itself is not included with this product.

• Floor Panel x4
• Screw & Nut (Big size) x4
• Screw & Nut (Small size) x7
• Support Bar x2
• L Wrench x1

Image: All components of the Soil-Saving Intermediate Floor laid out, including the four floor panels, various screws and nuts, two support bars, and the L wrench for assembly.

Setup and Assembly

Follow these steps to correctly assemble and install your Vego garden Soil-Saving Intermediate Floor into your 32-inch tall Modern Garden Bed.

1. Prepare the Garden Bed: Ensure your 32-inch tall Vego garden Modern Garden Bed is fully assembled and placed in its desired location.
2. Position Floor Panels: Carefully place the four floor panels inside the garden bed. The corrugated side should face upwards. Arrange them to cover the entire base area where the soil will rest.
3. Attach Support Bars: Identify the two support bars. These bars will connect the floor panels and provide central stability.
4. Secure Support Bars to Panels: Using the provided screws and nuts (small size), attach the support bars to the designated points on the floor panels. Ensure a snug fit.


Image: A close-up view of hands using the L wrench to secure a screw, demonstrating the assembly process of the intermediate floor.

5. Connect Support Bars to Garden Bed Frame: Use the larger screws and nuts to connect the ends of the support bars to the vertical frame of the garden bed. This provides additional stability and ensures the floor is suspended at the correct height.

Image: Detailed view of a support bar securely fastened to the intermediate floor panel, illustrating the robust connection.


Image: A different angle showing the support bar's attachment, highlighting its role in stabilizing the intermediate floor within the garden bed structure.

6. Verify Stability: Once all screws and nuts are tightened, gently press on the assembled intermediate floor to ensure it is stable and securely in place.

Operating and Usage

The Vego garden Soil-Saving Intermediate Floor is designed to optimize soil usage in your 32-inch tall Modern Garden Bed. After installation, the floor creates a raised base for your soil, effectively reducing the required soil depth from 32 inches to approximately 12 inches.

This reduction in soil depth means you will need significantly less soil to fill your garden bed, leading to cost savings and less physical effort. The 12-inch soil depth is ample for the root systems of most common garden vegetables, herbs, and flowers, allowing for healthy plant growth.

Image: A visual representation showing how the intermediate floor reduces the required soil depth in a tall garden bed, highlighting the soil-saving benefit.

Once the intermediate floor is installed, you can proceed to fill your garden bed with your preferred soil mix up to the desired level, typically around 12 inches deep from the top of the intermediate floor. The space below the intermediate floor remains empty, contributing to the soil-saving benefit.

Maintenance

The Vego garden Soil-Saving Intermediate Floor is constructed from durable galvanized steel with a powder-coated finish, designed for long-term outdoor use with minimal maintenance.

• Cleaning: Periodically inspect the floor for any debris or soil buildup. Clean with water and a soft brush if necessary. Avoid abrasive cleaners or tools that could damage the powder coating.
• Inspection: Annually, or before each planting season, inspect all screws and connections to ensure they remain tight. Re-tighten any loose fasteners using the L wrench provided.
• Drainage: Ensure that the garden bed itself has adequate drainage to prevent water from pooling excessively on the intermediate floor, although the design allows for water to pass through the corrugated sections.

Troubleshooting

If you encounter any issues with your Soil-Saving Intermediate Floor, consider the following common solutions:

• Instability after Assembly:
  • Ensure all screws and nuts are fully tightened.
  • Verify that the support bars are correctly attached to both the floor panels and the garden bed frame.
• Floor Panels Not Fitting Correctly:
  • Confirm that you have the correct size intermediate floor for your Vego garden Modern Garden Bed (this model is for 27" x 53" beds).
  • Ensure the garden bed itself is properly assembled and square.

For further assistance, please refer to the Support section.

Specifications

Warranty and Support

Return Policy: This product is subject to a 30-day return policy for refund or replacement, as per standard Amazon terms.

Manufacturer Support: For any questions, technical assistance, or issues not covered in this manual, please contact Vego garden directly. The product is sold by Vego Garden Official on Amazon. You may also visit the official Vego garden Store for more information and contact options.