XNY XNY-107-4G-C 4G Wireless Alarm System User Manual

1. Introduction

The XNY XNY-107-4G-C is a comprehensive wireless alarm system designed to enhance home security. It features a 4.3-inch touch screen, dual WiFi and 4G network support, and compatibility with smart home platforms like Tuya, Smart Life, Amazon Alexa, and Google Assistant. This manual provides detailed instructions for the installation, operation, and maintenance of your alarm system.

2. Package Contents

Please verify that all items listed below are included in your package:

• 1 x Alarm Host (Main Panel)
• 1 x PE-513 Siren
• 2 x PIR Motion Detectors
• 4 x Door/Window Sensors
• 2 x RFID Cards
• 2 x Remote Controls
• 1 x Micro C Data Cable (for power)
• Mounting Screws

Figure 2.1: The XNY XNY-107-4G-C alarm system and its complete set of accessories, including the main panel, motion detectors, door/window sensors, remote controls, RFID cards, and siren.

3. Setup and Installation

The XNY alarm system is designed for user-friendly installation. Follow these steps to set up your system:

1. Mount the Alarm Host: Securely fix the alarm host to a wall using the provided screws. Ensure it is placed in a central location for optimal sensor coverage and network connectivity.
2. Connect Power: Plug the Micro C data cable into the alarm host and connect it to a power source. The system includes a built-in backup battery for emergency operation during power outages.
3. Insert SIM Card (Optional): If you intend to use 4G cellular communication, open the back cover and insert a compatible 2G/3G/4G SIM card into the designated slot.
4. Connect Wired Sensors (Optional): If you have wired sensors, connect them to the wired sensors connector on the back of the alarm host.
5. Install Sensors:
   • Motion Detectors: Install PIR motion detectors in areas where intruders are likely to pass. Position them to cover entry points and high-traffic zones.
   • Door/Window Sensors: Attach the two parts of each door/window sensor to the frame and the movable part of doors and windows. Ensure they are aligned and close enough for proper detection when the opening is breached.
6. Pair Accessories: The included accessories (motion detectors, door/window sensors, remote controls, RFID cards) are typically pre-paired. If not, refer to the on-screen menu for pairing instructions. The system supports up to 200 accessories.
7. Connect Siren: Connect the siren to the 3.5mm siren connector on the back of the alarm host.
8. Network Configuration:
   • WiFi: On the 4.3-inch touch screen, navigate to network settings and connect to your 2.4 GHz WiFi network.
   • App Integration: Download the "Tuya" or "Smart Life" app from your smartphone's app store. Follow the in-app instructions to add your XNY alarm system. This enables remote control, notifications, and integration with Amazon Alexa and Google Assistant.

Figure 3.1: Front view of the alarm host, highlighting the speaker, 4.3-inch display screen, SOS button, RFID area, disarm button, and arm button.

Figure 3.2: Rear view of the alarm host, showing the anti-tamper bracket, battery switch, Type C power connector, 3.5mm siren connector, SIM card slot, back cover, and wired sensors connector.

4. Operating Instructions

4.1. Touch Screen Interface

The 4.3-inch IPS capacitive touch screen provides an intuitive interface for managing your alarm system. You can navigate through menus, adjust settings, and control the system directly from the panel.

Figure 4.1: The 4.3-inch touch screen interface, demonstrating the ability to set different theme colors for personalized display.

4.2. Arming and Disarming

• Arm: Activates all sensors. The system will trigger an alarm if any sensor detects a breach.
• Stay Arm: Activates perimeter sensors (e.g., door/window sensors) while allowing free movement within the property (motion detectors are typically disarmed).
• Disarm: Deactivates all sensors, allowing you to move freely without triggering the alarm.
• SOS Button: Press the SOS button on the panel or remote control in an emergency to immediately trigger the alarm and notify pre-set contacts.

Figure 4.2: Demonstrating the one-click SOS function on the alarm panel, designed for quick access in emergencies.

4.3. Dual Network Connectivity (WiFi & 4G)

The system supports both 2.4 GHz WiFi and 2G/3G/4G cellular networks. This dual-network capability ensures continuous protection even if one network fails. If a SIM card is installed, the alarm can function normally even if the WiFi connection is lost.

Figure 4.3: The alarm panel displaying its dual WiFi and 4G network connectivity, alongside logos for Amazon Alexa, Google Assistant, Smart Life, and Tuya apps.

4.4. Smart Home Integration

The XNY alarm system integrates with "Tuya" and "Smart Life" applications, allowing remote control and real-time notifications on your smartphone. It is also compatible with Amazon Alexa and Google Assistant for voice control.

• App Control: Arm, disarm, and manage settings from anywhere using the Tuya or Smart Life app. Receive instant notifications when sensors are triggered.
• Voice Control: Use voice commands with Alexa or Google Assistant to control your alarm system.

Figure 4.4: An illustration depicting the XNY alarm system's capability to link with other smart home products, such as wireless doorbells, outdoor alarms, smart plugs, motion detectors, cameras, on-site sirens, and smoke detectors.

4.5. Timing Arm/Disarm

You can schedule specific times for the system to automatically arm or disarm. This feature helps automate your security routine and saves time.

• Set daily schedules for arming when you leave and disarming when you return.
• Configure night-time arming for enhanced security while sleeping.

Figure 4.5: Visual examples of scheduled arming and disarming, illustrating how the system can be set to automatically arm or disarm at specific times of the day.

4.6. Two-Way Voice Intercom

The alarm host supports two-way voice communication, allowing you to speak through the panel and hear responses from the location where the panel is installed. This can be useful for checking in on family members or communicating with visitors.

Figure 4.6: A visual representation of the two-way voice intercom feature, showing a person communicating with someone near the alarm panel via a smartphone.

4.7. Alarm Response

When a sensor is triggered, the system will:

• Emit a siren sound exceeding 120 dB to deter intruders.
• Automatically dial pre-set phone numbers.
• Send alarm messages (SMS) to pre-set phone numbers.
• Send real-time notifications via the connected mobile app.

The system will automatically attempt to call the next number if a line is busy, ensuring critical alerts are delivered.

5. Maintenance

• Battery Check: The alarm host has a built-in Lithium-ion battery. Ensure it is charged to maintain operation during power outages. Periodically check the battery status via the display or app.
• Sensor Batteries: Replace batteries in wireless sensors as needed. Low battery indicators will typically appear on the main panel or app.
• Cleaning: Clean the touch screen and sensor surfaces with a soft, dry cloth. Avoid abrasive cleaners or excessive moisture.
• Firmware Updates: Check the Tuya or Smart Life app for any available firmware updates for the alarm host to ensure optimal performance and security.

6. Troubleshooting

7. Specifications

8. Warranty and Support

For warranty information and technical support, please refer to the documentation provided with your purchase or contact XNY customer service directly. Information regarding spare parts availability is not provided in this manual. For further assistance, please visit the official XNY website or contact your retailer.