lvifloae S18

lvifloae S18 Invisible Wearable Electric Breast Pump User Manual

Model: S18 | Brand: lvifloae

1. Introduction

This manual provides instructions for the safe and effective use of your lvifloae S18 Invisible Wearable Electric Breast Pump. Please read this manual thoroughly before first use and retain it for future reference. The lvifloae S18 is designed to offer a convenient and discreet breast milk expression experience.

Two lvifloae S18 invisible wearable electric breast pumps, yellow and clear, with two USB-C charging cables and two bra adjustment buckles.

Image: The lvifloae S18 Invisible Wearable Electric Breast Pump, shown with included accessories.

2. Important Safety Information

Always follow basic safety precautions when using electrical products, especially when children are present. Failure to follow these instructions may result in electric shock, fire, or serious injury.

  • Do not immerse the motor unit in water or other liquids.
  • Keep the device away from heat sources.
  • Use only the provided charging cable and a compatible 5V 1A power adapter.
  • Inspect all components before each use for damage. Discard and replace any damaged parts.
  • This device is for personal use only. Do not share with others.
  • Consult a healthcare professional if you experience pain or discomfort during pumping.
  • Keep out of reach of children.

3. Package Contents and Product Components

3.1 Package Contents

The package includes the following items:

  • 1 x Breast Pump (Motor Unit and Milk Collector Assembly)
  • 1 x USB-C Charging Cable
  • 1 x Bra Adjustment Buckle
  • 1 x User Manual

3.2 Product Components

Familiarize yourself with the individual parts of the breast pump for proper assembly and cleaning.

Diagram showing the individual components of the breast pump: Pump motor, Silicone diaphragm, Valve, Bra adjustment buckle, Milk collector, Flange, and Type-C cable.

Image: Exploded view of the breast pump components.

  • Pump Motor: The main unit containing the motor and control buttons.
  • Silicone Diaphragm: Creates the vacuum for suction.
  • Valve: Controls milk flow.
  • Bra Adjustment Buckle: For securing the pump within a bra.
  • Milk Collector: The container for expressed milk (180ml capacity).
  • Flange: The part that comes into contact with the breast (24mm diameter).
  • Type-C Cable: For charging the pump.

4. Setup and Assembly

Before first use, sterilize all parts that come into contact with breast milk (flange, milk collector, silicone diaphragm, valve). Ensure all parts are completely dry before assembly.

4.1 Assembly Steps

  1. Insert the valve into the bottom of the milk collector.
  2. Place the silicone diaphragm securely onto the milk collector, ensuring a tight seal.
  3. Attach the flange to the milk collector.
  4. Connect the assembled milk collector with the flange and diaphragm to the pump motor unit, ensuring it clicks into place securely.

4.2 Wearing the Breast Pump

For optimal performance and comfort, position the pump correctly.

Diagram showing two steps for wearing the breast pump. Step 1: Bend slightly to ensure the nipple is centered in the container and fits snugly against the breast. Step 2: Wear a bra after fixing the breast pump in place, keeping the body upright and the main unit facing upwards for operation.

Image: Instructions for correctly wearing the breast pump.

  1. Step 1: Bend slightly forward to ensure your nipple is centered within the flange tunnel. Press the pump firmly against your breast to create a secure seal.
  2. Step 2: Once the pump is securely attached, wear a nursing bra to hold it in place. Ensure the main motor unit is facing upwards for easy access to controls.

5. Operating Instructions

The lvifloae S18 features two modes and nine suction levels for personalized expression.

5.1 Charging the Device

  • Before first use, fully charge the breast pump.
  • Connect the USB-C charging cable to the charging port on the motor unit and plug the other end into a 5V 1A USB power adapter (not included).
  • The indicator light will show charging status. A full charge provides extended operating time.
  • The built-in 1000mAh rechargeable lithium battery ensures long working time.

5.2 Power On/Off and Mode Selection

  • Power On: Press and hold the power button on the motor unit.
  • Mode Selection: Press the mode button to switch between Massage Mode and Expression Mode.
  • Suction Level Adjustment: Use the '+' and '-' buttons to adjust the suction intensity (9 levels available in each mode).
  • Power Off: Press and hold the power button to turn off the device.

5.3 Understanding Modes

Diagram illustrating the two modes of the breast pump. Step 1: Massage Mode (1-9 Gears) with a quick and shallow waveform. Step 2: Expression Mode (1-9 Gears) with a slowly and deeply waveform.

Image: Illustration of Massage Mode and Expression Mode waveforms.

  • Massage Mode (1-9 Levels): This mode provides a quick and shallow suction rhythm, designed to stimulate milk let-down. It is recommended to start with this mode for a few minutes.
  • Expression Mode (1-9 Levels): This mode offers a slower and deeper suction rhythm, mimicking a baby's feeding pattern to efficiently express milk. Switch to this mode once milk flow begins.

Find the suction level that feels comfortable and effective for you. The pump operates with low noise, less than 40dB, to ensure a discreet experience.

Diagram showing noise levels. The breast pump operates at less than 40dB, which is quieter than low voice talk (45-50dB) and normal talk (60dB), comparable to a whisper (30dB) or a quiet night (20dB).

Image: Noise level comparison, highlighting the quiet operation of the breast pump.

6. Cleaning and Maintenance

Proper cleaning and maintenance are crucial for hygiene and the longevity of your breast pump. Always clean parts immediately after each use.

6.1 Disassembly for Cleaning

  1. Turn off the pump and carefully remove it from your breast.
  2. Gently detach the motor unit from the milk collector assembly.
  3. Disassemble all parts that come into contact with breast milk: flange, milk collector, silicone diaphragm, and valve.

6.2 Cleaning Instructions

  • Motor Unit: The motor unit should not be washed or immersed in water. Wipe it clean with a soft, damp cloth.
  • Milk Contact Parts (Flange, Milk Collector, Silicone Diaphragm, Valve):
    • Rinse immediately after use with cold water to remove milk residue.
    • Wash thoroughly with warm soapy water using a mild dish soap.
    • Rinse all parts under running water to remove soap residue.
    • Sterilize by boiling in water for 3-5 minutes or using a steam sterilizer.
    • Allow all parts to air dry completely on a clean drying rack before reassembly or storage.

6.3 Storage

Store all clean and dry components in a clean, dry place away from direct sunlight and dust.

7. Troubleshooting

If you encounter issues with your breast pump, refer to the following common problems and solutions.

ProblemPossible CauseSolution
No suction or weak suction
  • Improper assembly
  • Damaged silicone diaphragm or valve
  • Low battery
  • Flange not sealed properly to breast
  • Reassemble all parts, ensuring a tight seal.
  • Inspect diaphragm and valve for tears or damage; replace if necessary.
  • Charge the pump fully.
  • Adjust pump position on breast to ensure a complete seal.
Pump not turning on
  • Low or depleted battery
  • Power button not pressed correctly
  • Charge the pump.
  • Press and hold the power button firmly for a few seconds.
Milk leaking from pump
  • Improper assembly
  • Milk collector full
  • Damaged valve or seal
  • Ensure all parts are correctly assembled and sealed.
  • Empty the milk collector when it reaches its capacity (180ml).
  • Inspect valve and seals for damage; replace if necessary.
Pain or discomfort during pumping
  • Incorrect flange size
  • Suction level too high
  • Improper nipple alignment
  • Ensure the 24mm flange is the correct size for your nipple. Consult a lactation consultant if unsure.
  • Reduce the suction level to a comfortable setting.
  • Re-position the pump to ensure the nipple is centered in the flange tunnel.

8. Product Specifications

FeatureSpecification
ModelS18 (Item model number: lvifloae95ngh4ad3w)
Brandlvifloae
MaterialPP + Silicone
Flange Diameter24mm
Storage Capacity180ml
Modes2 (Massage Mode, Expression Mode)
Suction Levels9 per mode
Battery Capacity3.7V 1000mAh
Charging PortType-C
Charging Voltage5V 1A
Item Size11 x 12 x 6 cm (4.3 x 4.7 x 2.5 inches)
Item Weight225g (7.9oz)
Product Dimensions (Pack)7.48 x 5.91 x 3.15 inches; 1.41 Pounds
ASINB0DK5YWS5M

9. Warranty and Customer Support

For warranty information or customer support, please contact the manufacturer, lvifloae, through your purchase platform or their official website. Keep your proof of purchase for warranty claims.

Optional protection plans may be available for extended coverage. Please refer to the details provided at the time of purchase for information on these plans.

  • Manufacturer: lvifloae
  • Legal Disclaimer: Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.

© 2024 lvifloae. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.