Anahit M-97A Dual-Band WiFi Extender User Manual

1. Product Overview

The Anahit M-97A WiFi Extender is designed to expand your existing wireless network coverage and eliminate Wi-Fi dead zones. It supports dual-band frequencies (2.4GHz and 5.8GHz) and offers data transfer rates up to 1200 Mbps, ensuring stable and fast internet connectivity for multiple devices.

Figure 1: Anahit M-97A WiFi Extender. This image displays the front view of the extender, highlighting its four external antennas and LED indicator lights.

Key Features:

• Dual-Band Connectivity: Supports 2.4GHz and 5.8GHz bands for flexible and high-speed connections.
• High Speed: Delivers up to 1200 Mbps data transfer rate.
• Wide Coverage: Extends Wi-Fi coverage to eliminate dead zones, supporting up to 36 devices.
• Strong Signal Penetration: Designed to penetrate thick walls and floors.
• WPS Button: For quick and secure connection to your router.
• Ethernet Port: Provides a wired connection option for devices.
• Advanced Security: Supports WEP/WPA/WPA2 protocols for network protection.

2. Package Contents

Please check the package contents upon unboxing. If any items are missing or damaged, contact customer support.

• Anahit M-97A WiFi Extender
• User Manual (this document)
• Ethernet Cable (may be included depending on region/package)

3. Device Layout

Figure 2: Anahit M-97A WiFi Extender device layout. This diagram labels the external antennas, WPS button, ON/OFF button, and Ethernet port, along with its dimensions.

• External Antennas: Four adjustable antennas for optimal signal reception and transmission.
• WPS Button: Used for quick and secure connection to your router.
• ON/OFF Button: Powers the device on or off. Note: Some models may not fully power off the network signal with this button; unplugging may be required for complete shutdown.
• Ethernet Port: For connecting wired devices or configuring in AP mode.
• LED Indicators: Display power status, Wi-Fi signal strength, and connection status.

4. Setup Instructions

There are two primary methods to set up your Anahit M-97A WiFi Extender: using the WPS button or via a web browser.

4.1. WPS Setup (Recommended for quick setup)

1. Power On: Plug the Anahit M-97A extender into an electrical outlet near your existing Wi-Fi router. Wait for the power LED to stabilize.
2. Activate WPS on Extender: Press the WPS button on the Anahit M-97A extender. The WPS LED indicator should start blinking.
3. Activate WPS on Router: Within two minutes, press the WPS button on your main Wi-Fi router. Refer to your router's manual for the exact location of its WPS button.
4. Connect: Wait for the WPS LED on the extender to turn solid, indicating a successful connection. The extender will automatically create new Wi-Fi networks with "_EXT" or similar suffixes (e.g., "YourNetworkName_EXT").
5. Relocate (Optional): Once connected, you can unplug the extender and move it to a location halfway between your router and the Wi-Fi dead zone. Ensure the signal strength indicator on the extender shows a good connection to your router.

Figure 3: One-Touch WPS Setup. This image illustrates the three simple steps for connecting the extender to your router using the WPS button.

4.2. Web Browser Setup

1. Power On: Plug the extender into an electrical outlet.
2. Connect to Extender's Network: On your computer or mobile device, connect to the extender's default Wi-Fi network (e.g., "Anahit_Extender" or similar, usually found on a label on the device). No password is required initially.
3. Access Setup Page: Open a web browser and enter the default IP address or web address (e.g., 192.168.1.1 or reapeter.net). Refer to the label on the back of your extender for the exact default settings.
4. Log In: Enter the default username and password (usually "admin" for both, or as specified on the device label).
5. Select Mode: Choose "Repeater Mode" or "AP Mode" based on your needs (see Section 5 for details).
6. Configure Network:
   • Repeater Mode: Select your existing Wi-Fi network from the list, enter its password, and optionally change the extender's network name.
   • AP Mode: If using AP mode, connect an Ethernet cable from your router to the extender's Ethernet port. The extender will create a new Wi-Fi network.
7. Complete Setup: Follow the on-screen prompts to finalize the configuration. The extender will restart.
8. Reconnect: Connect your devices to the new extended Wi-Fi network.

Figure 4: Back view of the Anahit M-97A Extender. This image shows the product label with default SSID, IP address, and password information, essential for web browser setup.

5. Operating Modes

The Anahit M-97A supports two main operating modes:

Figure 5: Two Core Modes for Seamless WiFi Coverage. This diagram visually explains how Repeater Mode extends existing Wi-Fi signals and how AP Mode converts a wired connection into a wireless network.

5.1. Repeater Mode

In Repeater Mode, the extender wirelessly connects to your existing router and re-broadcasts the signal, extending its range. This is ideal for eliminating Wi-Fi dead zones in larger homes or offices.

• Boosts and extends existing Wi-Fi signals.
• Wireless connection to the main router.
• Creates a new extended Wi-Fi network.

5.2. AP Mode (Access Point Mode)

In AP Mode, the extender connects to your router via an Ethernet cable and transforms the wired internet connection into a new wireless access point. This is useful for adding Wi-Fi capability to a wired network or creating a separate Wi-Fi network.

• Converts a wired connection into a wireless network.
• Requires an Ethernet cable connection to the main router.
• Ideal for areas with existing Ethernet wiring but no Wi-Fi.

6. Maintenance and Best Practices

• Optimal Placement: Place the extender in a central location between your router and the area needing coverage. Avoid placing it near large metal objects, concrete walls, or appliances that emit electromagnetic interference (e.g., microwaves, cordless phones).
• Firmware Updates: Periodically check the manufacturer's website for firmware updates. Updates can improve performance, add features, and enhance security.
• Cleaning: Keep the device clean and free from dust. Use a soft, dry cloth for cleaning. Do not use liquid cleaners.
• Security: Ensure your Wi-Fi network is secured with a strong WPA2 password. Change default login credentials for the extender's web interface.
• Ventilation: Ensure the extender has adequate ventilation to prevent overheating. Do not cover the device.

7. Troubleshooting

8. Specifications

9. Warranty and Support

For warranty information and technical support, please refer to the documentation included with your purchase or visit the official Anahit website. You may also contact Anahit customer service directly for assistance with product setup, troubleshooting, or warranty claims.

Please retain your proof of purchase for warranty purposes.