Introduction
Thank you for choosing the WarmWave Deluxe Digital 30" Oscillating Ceramic Tower Space Heater. This manual provides essential information for the safe operation, maintenance, and troubleshooting of your new appliance. Please read it thoroughly before use and retain it for future reference.
Image: The WarmWave Deluxe Digital 30" Oscillating Ceramic Tower Space Heater, showing heat radiating from its front grille and a remote control floating nearby.
Important Safety Information
WARNING: To reduce the risk of fire, electric shock, or injury, read and understand all instructions before using this heater.
- Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).
- This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces.
- Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the heater, and keep them away from the sides and rear.
- Tip-Over Protection: The heater is equipped with a safety switch that automatically shuts off the unit if it is accidentally tipped over.
- Overheat Protection: The heater features an automatic overheat protection system. If the heater reaches an unsafe temperature, it will automatically turn off. To reset, unplug the heater, wait 10 minutes, and then plug it back in.
- Do not use outdoors.
- Do not use in bathrooms, laundry areas, or similar indoor locations.
- Unplug the heater when not in use.
Image: A graphic demonstrating the Overheat Protection System, indicating the heater automatically shuts off if it reaches 203°F.
Package Contents
- WarmWave Deluxe Digital 30" Oscillating Ceramic Tower Space Heater
- Remote Control
- Owner's Manual (this document)
Setup
- Unpack: Carefully remove the heater and all accessories from the packaging. Retain packaging for storage.
- Placement: Place the heater on a firm, level surface. Ensure it is at least 3 feet (0.9 m) away from walls, furniture, and other combustible materials.
- Power Connection: Plug the power cord directly into a 120V AC, 60Hz wall outlet. Do not use extension cords or power strips.
Operating Instructions
Your WarmWave heater can be operated using the control panel on top of the unit or the included remote control.
Control Panel
Image: A detailed view of the heater's top control panel, showing the digital temperature display and various function buttons.
- Power Button (⏻): Press to turn the heater ON or OFF.
- Mode Button (∿): Cycle through heat settings (Low, High) and fan-only mode.
- Temperature Adjustment (+/-): Increase or decrease the desired temperature. The digital display will show the set temperature.
- Oscillation Button (↻): Press to activate or deactivate the wide oscillation feature for even heat distribution.
- Timer Button (🕐): Set the 12-hour timer in 1-hour increments.
Remote Control
Image: The remote control for the WarmWave heater, displaying buttons for power, heat settings, oscillation, timer, and temperature adjustment.
The full-function remote control allows you to operate all features of the heater from a distance. Ensure the remote is pointed towards the heater's display panel for optimal response.
Image: A hand demonstrating how to store the remote control in the integrated slot on top of the heater for convenience.
Maintenance
Regular maintenance ensures optimal performance and longevity of your heater.
- Cleaning: Always unplug the heater before cleaning. Use a soft, damp cloth to wipe the exterior surfaces. Do not use abrasive cleaners or solvents.
- Dust Removal: Use a vacuum cleaner with a brush attachment to remove dust from the grilles.
- Storage: When not in use, store the heater in a cool, dry place. It is recommended to store it in its original packaging to protect it from dust and damage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Heater does not turn on. | Not plugged in; power outlet not working; tip-over switch activated; overheat protection activated. | Ensure plug is firmly in outlet. Check circuit breaker. Place heater on a flat, stable surface. Unplug, wait 10 minutes, then replug. |
| Heater stops working unexpectedly. | Overheat protection activated; tip-over switch activated. | Unplug, wait 10 minutes, then replug. Ensure heater is upright on a stable surface. |
| Remote control not working. | Batteries dead; remote not pointed at sensor. | Replace batteries. Ensure clear line of sight to the heater's display panel. |
Specifications
- Model: KPT-76B-WW
- Brand: WarmWave
- Type: Ceramic Tower Space Heater
- Dimensions: 7.9"D x 7.8"W x 30"H
- Item Weight: 4.6 Pounds
- Power: 120 Volts, 60Hz, 12.5 Amps
- Heat Settings: 2 (with fan-only mode)
- Special Features: Adjustable Thermostat, Cool Touch Exterior, Digital Display, Electronic Thermostat, Fast Heating, Lightweight, Oscillating, Overheat Protection, Portable, Remote Control, Tip-Over Protection
- Safety Certifications: ETL listed
Warranty and Support
This WarmWave heater comes with a 1-Year limited manufacturer's warranty. For warranty claims, technical support, or replacement parts, please contact WarmWave customer service. Refer to the product packaging or the official WarmWave website for contact details.
UPC: 877697004716