ASDJAKZP Swivel Seat Mount Instruction Manual

Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of the ASDJAKZP Swivel Seat Mount. This product is designed to convert fixed vehicle seats into swivel seats, enhancing accessibility and comfort within your vehicle. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Safety Information

Warning:

• Professional installation is highly recommended due to the complexity of the product and its critical role in vehicle safety.
• Ensure all bolts are securely tightened to the manufacturer's specifications. Loose connections can lead to instability and potential hazards.
• Disconnect the vehicle's battery before beginning installation to prevent electrical shorts or damage.
• Verify compatibility with your specific vehicle model and year before attempting installation. Refer to the "Applicable Models" section.
• Do not operate the vehicle with a loose or improperly installed swivel seat.
• Be aware of potential interference with vehicle components (e.g., electrical wiring) when rotating the seat.

Specifications

Image: Driver Side Swivel Seat Mount with indicated dimensions of 18 inches (46 cm) by 18 inches (46 cm).

Image: Detailed view of the swivel seat base, highlighting its robust carbon steel and hot rolled steel construction, designed for durability and rust resistance.

Package Contents

Image: The complete package contents, including the main swivel seat base and all necessary installation hardware such as bolts, nuts, and washers.

The package includes the following items:

• 1 x Swivel Seat Base
• Necessary mounting hardware (bolts, nuts, washers)

Setup and Installation

The installation of the swivel seat mount requires careful attention to detail and mechanical aptitude. It is highly recommended to seek assistance from professional engineers or certified automotive technicians to ensure correct and safe installation.

Image: A visual guide indicating the specific vehicle models for which this swivel seat mount is directly compatible without requiring drilling.

Image: An overhead view of the swivel seat base installed in a vehicle, demonstrating its integration with the existing seat and floor structure.

Applicable Models (Direct Installation without Drilling):

• Fit for Sprinter (4 red holes) 2007-2018
• Fit for Sprinter and Metris (4 yellow holes) 2019-2020
• Fit for Sprinter (6 purple holes) 2002-2006
• Fit for Transit 150 250 350 (4 green holes) 2014-2023
• Fit for Promaster (6 blue holes) 2014-2020
• Fit for Multivan T5 T6 (may require drilling for other models)

General Installation Steps:

1. Preparation: Ensure the vehicle is parked on a level surface, the engine is off, and the parking brake is engaged. Disconnect the vehicle's battery.
2. Remove Existing Seat: Carefully unbolt and remove the existing driver's side seat from its mounting points. Be mindful of any electrical connections (e.g., airbags, seat heaters) and disconnect them properly.
3. Position Swivel Base: Place the swivel seat base onto the vehicle's floor mounting points. Ensure proper alignment with the pre-drilled holes.
4. Secure Swivel Base: Use the provided hardware to secure the swivel base to the vehicle floor. Tighten all bolts evenly and securely.
5. Mount Seat to Swivel Base: Attach the removed seat onto the top of the swivel base. Reconnect any electrical connections.
6. Final Tightening: Double-check all bolts for tightness. Ensure the swivel mechanism operates smoothly before reconnecting the battery.

Important Note on Bolt Length:

Some installations may find that certain bolts, particularly those for the rear, are slightly too long and may interfere with the swivel mechanism. If this occurs, it may be necessary to shorten these specific bolts by approximately 0.5 inches (1.27 cm) to ensure proper clearance and full rotation. This modification should only be performed by a qualified professional.

Operating Instructions

Image: The swivel seat base demonstrating its full 360-degree rotation capability, allowing movement in both clockwise and counterclockwise directions.

Image: The swivel seat fully installed in a vehicle, showcasing how it integrates with the interior and provides enhanced seating flexibility.

The swivel seat mount allows for 360-degree rotation of the driver's seat, enabling easier entry, exit, and adjustment of seating position. The rotation can be performed both clockwise and counterclockwise.

1. Unlock Mechanism: Locate the red lever or locking mechanism on the side of the swivel base. Pull or push the lever to disengage the lock.
2. Rotate Seat: While the mechanism is unlocked, gently rotate the seat to the desired position. The seat may require the weight of a person to rotate smoothly.
3. Lock Mechanism: Once the desired position is reached, release the lever to engage the locking mechanism. Ensure the seat is securely locked in place before driving. A distinct click may indicate proper locking.

Important Considerations:

• For some vehicle models, it may be necessary to open the vehicle door slightly to allow for full rotation of the seat without obstruction.
• Ensure no cables or wires underneath the seat are pinched or damaged during rotation.
• The swivel mechanism may feel stiff initially. This is normal and will typically loosen with use.

Maintenance

Regular maintenance helps ensure the longevity and smooth operation of your swivel seat mount.

• Inspection: Periodically inspect all mounting bolts and connections to ensure they remain tight. Re-tighten if necessary.
• Cleaning: Keep the swivel mechanism free from dirt, dust, and debris. Use a damp cloth to wipe down surfaces. Avoid harsh chemicals.
• Lubrication: If the rotation becomes stiff over time, apply a small amount of silicone-based lubricant to the moving parts of the swivel mechanism. Avoid excessive lubrication, which can attract dirt.
• Rust Prevention: While the product is designed to be rust-resistant, regular cleaning and ensuring the area remains dry can further prevent corrosion, especially in humid environments.

Troubleshooting

Warranty and Support

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official ASDJAKZP website. Keep your proof of purchase for any warranty claims.