LIBODD Tuya WiFi Automatic Reclosing Protector User Manual

1. Introduction

Thank you for choosing the LIBODD Tuya WiFi Automatic Reclosing Protector. This device is designed to provide intelligent protection for your electrical circuits, integrating overvoltage, undervoltage, overcurrent, and leakage protections with automatic reclosing capabilities. It features an LCD display for real-time monitoring and can be controlled remotely via the Tuya mobile application. Please read this manual carefully before installation and operation to ensure safe and efficient use.

2. Product Features

• Digital LCD Display: Displays real-time electricity, voltage, current, and leakage values for clear monitoring.
• Mobile App Control: Remote on/off control, monitoring of electrical parameters, timing schedules, and device sharing via the Tuya app.
• Multiple Protections: Integrates overvoltage, undervoltage, overcurrent, and leakage protection with customizable setting values.
• Automatic Reclosing: Automatically cuts off power upon fault detection (overvoltage, undervoltage, leakage) and recloses once the fault is cleared.
• Easy Installation: Compact size suitable for DIN rail mounting in distribution boxes or on walls.

3. Product Overview

Familiarize yourself with the components and controls of your Automatic Reclosing Protector.

Figure 3.1: Product Parameters and Components

• Inlet Side: Power input terminals.
• Outlet Side: Power output terminals.
• LCD Display: Shows real-time electricity, voltage, current, and leakage values.
• Pulse Button: For specific functions (refer to advanced settings).
• Set Up / Query Button: Used to enter settings menu or query data.
• Raise Button: Increases values during settings adjustment.
• Down Button: Decreases values during settings adjustment.
• NO OFF Button: Main switching key to turn the device on or off.
• Wi-Fi Indicator: Shows Wi-Fi connection status.
• Distribution Network Mode: Press and hold the "Down" button for 5 seconds to enter distribution network pairing mode.

4. Setup and Installation

4.1 Safety Precautions

• Ensure power is disconnected before any installation or wiring.
• Installation should be performed by a qualified electrician or professional.
• Verify correct wiring to prevent damage to the device or electrical hazards.

4.2 Mounting

The protector is designed for DIN rail mounting. Simply snap it onto a standard 35mm DIN rail within your distribution box or a suitable enclosure. No screws are required for mounting.

4.3 Wiring Diagram

Connect the incoming power supply to the Inlet Side terminals (marked 'IN'). Connect the load (appliances, circuits) to the Outlet Side terminals (marked 'OUT'). Ensure all connections are secure and properly insulated.

Figure 4.1: Basic Wiring Connection

5. Operating Instructions

5.1 Initial Power-Up and LCD Display

Once wired and powered on, the LCD display will illuminate, showing real-time electrical parameters.

Figure 5.1: Digital LCD Display

• KWh: Total electricity consumption.
• V: Real-time voltage.
• A: Real-time current.
• mA: Real-time leakage current.

5.2 Tuya App Connection and Control

1. Download the Tuya App: Search for "Tuya Smart" in your mobile app store (iOS or Android) and install it.
2. Register/Log In: Create an account or log in to your existing Tuya account.
3. Enter Pairing Mode: On the protector, press and hold the "Down" button for 5 seconds until the Wi-Fi indicator blinks rapidly, indicating pairing mode.
4. Add Device: In the Tuya app, tap "+" to add a new device. Select "Electrical" > "Circuit Breaker (Wi-Fi)" or allow the app to auto-discover the device.
5. Connect to Wi-Fi: Follow the in-app instructions to connect the device to your 2.4GHz Wi-Fi network.
6. Remote Control: Once connected, you can remotely turn the protector on/off, monitor electricity, voltage, current, and leakage, set timing schedules, and share control with other users.

Figure 5.2: Mobile App Control Interface

5.3 Setting Protection Values

You can customize the protection thresholds for overvoltage, undervoltage, overcurrent, and leakage current directly on the device or via the Tuya app.

1. Press the "Set Up / Query" button to enter the settings menu.
2. Use the "Raise" and "Down" buttons to navigate through different protection parameters (e.g., Overvoltage, Undervoltage, Overcurrent, Leakage).
3. Press "Set Up / Query" again to select a parameter for adjustment.
4. Use "Raise" and "Down" to adjust the desired value.
5. Press "Set Up / Query" to confirm and save the setting.

5.4 Automatic Reclosing Function

The device will automatically cut off the power supply if any set protection threshold is exceeded (e.g., overvoltage, undervoltage, overcurrent, or leakage). Once the fault condition is no longer detected, the protector will automatically reclose and restore power after a short delay, ensuring continuous operation while maintaining safety.

6. Maintenance

• Keep the device clean and free from dust. Use a dry, soft cloth for cleaning.
• Regularly check wiring connections to ensure they are tight and secure.
• Avoid exposing the device to excessive moisture or extreme temperatures.
• Do not attempt to disassemble or repair the device yourself. Contact qualified personnel for service.

7. Troubleshooting

8. Specifications

9. Warranty Information

This product comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or contact the seller directly. The warranty typically covers defects in materials and workmanship under normal use.

10. Customer Support

If you encounter any issues or have questions regarding the LIBODD Tuya WiFi Automatic Reclosing Protector, please contact your retailer or the manufacturer's customer support. Have your model number (1005007141975601) and purchase details ready when contacting support.

For further assistance, you may also visit the Tuya Smart website for app-related support and resources.