Dynamic Blinker LED Turn Signal Side Mirror Lights User Manual

1. Introduction

This user manual provides comprehensive instructions for the installation, operation, and maintenance of your new Dynamic Blinker LED Turn Signal Side Mirror Lights. These lights are designed to enhance vehicle visibility and safety by providing a clear, dynamic light signal to other road users, ensuring timely recognition and preventing potential hazards.

Please read this manual thoroughly before installation and operation to ensure proper use and to maximize the lifespan of your product.

2. Product Features

Enhanced Visibility: The dynamic blinking function allows other road users at a distance to clearly recognize the turn signal, reminding vehicles behind to react appropriately.
Durable Construction: The housing is made of high-quality ABS material, ensuring wear-resistance and longevity.
Energy Efficient: Features low power consumption, contributing to energy saving and a long service life.
Modern Aesthetic: Provides a "more cool" appearance with its dynamic light sequence.
Direct Replacement: Designed for easy, direct replacement of existing or damaged turn signals.

Audi Q7 with side mirror turn signal highlighted, showing dynamic yellow and blue light sequences

Figure 2.1: Illustration of the dynamic turn signal in action on a vehicle, demonstrating both yellow and blue light sequences.

3. Compatibility

These Dynamic Blinker LED Turn Signal Side Mirror Lights are compatible with the following Audi models:

Audi Q5 FY (2018-2020)
Audi Q7 4M (2016-2020)

Important: Before ordering, please confirm whether the model and OEM part number are suitable for your vehicle. If you have any questions, please send your vehicle information and photos of your current parts to customer support for assistance.

4. Package Contents

Upon opening the package, please verify that all components are present and undamaged:

2 x Dynamic Blinker LED Turn Signal Side Mirror Lights (Left and Right)

Figure 4.1: The two Dynamic Blinker LED Turn Signal Side Mirror Lights included in the package.

5. Installation Guide

Installation of these turn signals is designed to be a direct replacement. While installation is generally straightforward, professional installation is recommended if you are not familiar with automotive electrical systems or body panel removal.

5.1. Tools Required (Not Included)

Plastic trim removal tools
Screwdriver set (Torx and Phillips may be needed)
Gloves (optional, for protection)

5.2. Safety Precautions

Ensure the vehicle is turned off and the ignition key is removed.
Disconnect the negative terminal of the car battery before starting any electrical work to prevent short circuits.
Work in a well-lit area.
Handle components carefully to avoid damage.

5.3. Installation Steps

Preparation: Park the vehicle on a level surface. Ensure the side mirrors are folded in or adjusted to provide clear access to the turn signal area.
Remove Mirror Cap/Housing: Carefully use plastic trim removal tools to pry open or unclip the outer mirror cap or housing. Refer to your vehicle's specific service manual for precise instructions on how to safely remove the mirror components without causing damage.
Disconnect Old Turn Signal: Once the old turn signal unit is exposed, disconnect its electrical connector. There may be clips or screws holding the old unit in place; remove these as necessary.
Remove Old Turn Signal: Carefully extract the old turn signal unit from the mirror assembly.
Install New Turn Signal: Connect the electrical connector of the new Dynamic Blinker LED Turn Signal to the vehicle's wiring harness. Ensure the connection is secure. Carefully position the new LED turn signal into its designated slot within the mirror assembly. Ensure it clicks into place or secure it with any removed screws/clips.
Test Functionality: Before reassembling the mirror, reconnect the car battery's negative terminal. Turn on the vehicle's ignition and test the turn signals (left and right) to ensure they are functioning correctly and displaying the dynamic sequence.
Reassemble Mirror: Once confirmed working, carefully reattach the mirror cap or housing, ensuring all clips are securely fastened and there are no gaps.
Final Check: Perform a final visual inspection to ensure the new lights are properly seated and the mirror assembly is secure.

6. Operation

The Dynamic Blinker LED Turn Signal Side Mirror Lights operate automatically in conjunction with your vehicle's existing turn signal system. When the turn signal lever is activated (left or right), the corresponding LED light unit in the side mirror will illuminate with a sequential, dynamic amber light pattern, flowing from the inside outwards. This dynamic sequence provides a highly visible and modern indication of your turning intentions.

No additional user input or controls are required for the operation of these lights once correctly installed.

7. Maintenance

These LED turn signals are designed for minimal maintenance. Follow these guidelines to ensure their longevity:

Cleaning: Clean the surface of the lights with a soft, damp cloth and mild soap solution. Avoid abrasive cleaners or harsh chemicals that could damage the plastic housing or lens.
Inspection: Periodically inspect the lights for any signs of damage, cracks, or loose connections. Ensure the housing is securely fitted within the mirror assembly.
No User Serviceable Parts: The LED units are sealed and contain no user-serviceable parts. Do not attempt to open or modify the units, as this will void any potential warranty and may cause damage.

8. Troubleshooting

If you encounter issues with your Dynamic Blinker LED Turn Signal Side Mirror Lights, refer to the following common problems and solutions:

Problem	Possible Cause	Solution
Light does not illuminate.	Loose or disconnected electrical connector. Incorrect installation. Faulty unit. Vehicle's fuse blown (less common for turn signals).	Check and secure all electrical connections. Review installation steps (Section 5). If connections are secure and installation is correct, contact customer support. Consult a professional mechanic to check vehicle's electrical system.
Light blinks too fast (hyper-flashing).	LED lights draw less current than incandescent bulbs, which can trigger the vehicle's bulb-out warning system.	This product is designed as a direct replacement and should not cause hyper-flashing. If it occurs, ensure correct model compatibility. A load resistor may be required, but this is typically not needed for direct replacement units. Contact customer support for guidance.
Dynamic sequence is incorrect or inconsistent.	Loose connection. Unit defect.	Check and secure electrical connections. Contact customer support if the issue persists.

If the problem persists after attempting the suggested solutions, please contact customer support for further assistance.

9. Specifications

Attribute	Detail
Product Name	Dynamic Blinker LED Turn Signal Side Mirror Lights
Brand	Generic
Model Number	4952148216835
Color	Blue-Yellow (Dynamic Amber Turn Signal)
Material	ABS Housing
Compatibility	Audi Q5 FY (2018-2020), Audi Q7 4M (2016-2020)
Manufacturer	Metaphor Orange
ASIN	B0DJS4N6R5
Dimensions (Approx.)	Length: 300mm, Height: 46mm

Dimensions of the turn signal light, showing 300mm length and 46mm height

Figure 9.1: Approximate dimensions of the Dynamic Blinker LED Turn Signal.

10. Customer Support

We are committed to providing the best service. If you have any questions, concerns, or require assistance with your Dynamic Blinker LED Turn Signal Side Mirror Lights, please do not hesitate to contact us. We will provide a satisfactory answer to your inquiries.

Please have your product model number (4952148216835) and purchase details ready when contacting support to expedite the process.

(Specific contact information such as email or phone number is not provided in the product data. Please refer to your purchase platform or seller's page for direct contact methods.)