1. Introduction
Thank you for choosing the Soewolit Smart Wi-Fi Smoke Detector. This device is designed to provide reliable smoke detection and alert you to potential fire hazards through its loud alarm and smart app notifications. Please read this manual carefully before installation and operation to ensure proper use and safety.
2. Product Overview
The Soewolit Smart Wi-Fi Smoke Detector is a compact, battery-powered device equipped with a photoelectric sensor for effective smoke detection. It integrates with the Smart Life or Tuya Smart app, allowing for remote monitoring and control. Its 10-year replaceable battery ensures long-lasting protection.
Image 2.1: Soewolit Smart Wi-Fi Smoke Detector with app interface showing notifications and alarm indicators.
3. Features
- Smart Wi-Fi Connectivity: Connects to 2.4GHz Wi-Fi networks for real-time app notifications.
- 10-Year Replaceable Battery: Provides long-lasting power and peace of mind.
- Loud 85dB Alarm: Ensures audible alerts in case of smoke detection.
- Photoelectric Sensor: Detects smoke efficiently and reduces false alarms.
- Test/Silence Button: Allows for easy testing and silencing of the alarm, both physically and via the app.
- Low Battery Warning: Notifies you when the battery needs replacement.
- Compact Design: Mini size for discreet installation on walls or ceilings.
4. Package Contents
- 1 x Soewolit Smart Wi-Fi Smoke Detector
- 1 x CR123A Lithium Battery (pre-installed)
- 1 x Mounting Bracket
- 2 x Screws
- 2 x Wall Anchors
- 1 x Double-sided Adhesive Tape
- 1 x User Manual
5. Setup
5.1 Battery Activation
- Gently twist the back cover of the smoke detector counter-clockwise to open it.
- Locate the pre-installed CR123A battery. Remove the small plastic tab or paper strip blocking the battery terminal. This activates the battery.
- Ensure the battery is correctly seated with the positive (+) and negative (-) terminals aligned as indicated.
- Re-attach the back cover by aligning the marks and twisting clockwise until it clicks into place.
Image 5.1: Opening the smoke detector to activate the battery by removing the protective tab.
5.2 Initial Power-On
After battery activation, the detector will perform a self-test. The LED indicator will flash, and you may hear a short beep. This indicates the device is powering on and ready for use.
Video 5.2: An unboxing and initial setup demonstration of the smoke detector, including battery activation and mounting options.
6. Installation
The smoke detector can be installed on a wall or ceiling. Ensure the chosen location is free from obstructions and away from vents, windows, or areas with high humidity.
6.1 Recommended Placement
- Install at least one detector on every level of your home, including basements and attics.
- For optimal protection, install a smoke detector inside every bedroom and outside each sleeping area.
- Avoid placing detectors in kitchens, bathrooms, or garages where steam, cooking fumes, or exhaust can cause false alarms.
6.2 Mounting Options
You can mount the detector using the provided screws and wall anchors for a permanent installation, or use the double-sided adhesive tape for a less permanent solution.
- Using Screws: Mark the desired location. Drill two holes, insert wall anchors, and secure the mounting bracket with screws. Attach the smoke detector to the bracket by twisting it clockwise.
- Using Adhesive Tape: Ensure the mounting surface is clean and dry. Peel one side of the protective film from the double-sided adhesive tape and attach it to the back of the mounting bracket. Peel the other side of the film and firmly press the bracket onto the desired wall or ceiling location for at least 30 seconds. Attach the smoke detector to the bracket by twisting it clockwise.
Image 6.1: The smoke detector's test/silence button and compact dimensions (7.8cm/3in diameter, 5.7cm/2.2in height).
7. App Connection
The Soewolit Smart Wi-Fi Smoke Detector connects to your home's 2.4GHz Wi-Fi network via the Smart Life or Tuya Smart app.
7.1 Download the App
Search for "Smart Life" or "Tuya Smart" in your smartphone's app store (iOS or Android) and download the application. Register or log in to your account.
7.2 Connect to Wi-Fi
- Open the Smart Life or Tuya Smart app.
- Tap the "+" icon in the top right corner to add a device.
- Select "Sensors" or "Security & Video Surveillance" and then choose "Smoke Detector (Wi-Fi)".
- Follow the on-screen instructions to put the smoke detector into pairing mode (usually by pressing and holding the test button until the LED flashes rapidly).
- Enter your 2.4GHz Wi-Fi network password. The app will then connect to the device.
- Once connected, you can rename the device and assign it to a specific room for easier identification of alerts.
Image 7.1: The smoke detector establishing a connection with the Smart Life app over a 2.4GHz Wi-Fi network.
Video 7.2: A demonstration of the Smart Life app interface, showing how to connect the Wi-Fi smoke detector and manage settings.
8. Operating Instructions
8.1 Testing the Alarm
Regularly test your smoke detector to ensure it is functioning correctly. You can test it in two ways:
- Physical Test: Press and hold the Test/Silence button on the device for a few seconds. The alarm will sound loudly (85dB), and the LED will flash. Release the button to stop the alarm.
- App Test: Open the Smart Life or Tuya Smart app, select your smoke detector, and use the "Test Alarm" function within the app. The alarm will sound, and you will receive a notification.
Image 8.1: A hand pressing the test/silence button on the smoke detector, demonstrating manual testing.
8.2 Silencing the Alarm
If the alarm sounds due to non-emergency smoke (e.g., cooking fumes), you can silence it:
- Physical Silence: Press the Test/Silence button on the device. The alarm will temporarily stop.
- App Silence: Open the Smart Life or Tuya Smart app, select your smoke detector, and use the "Silence" function.
Video 8.2: A demonstration of the Wi-Fi smoke detector's alarm sound and app control features, including silencing.
8.3 App Notifications
When smoke is detected, the device will sound its alarm, and you will receive instant notifications on your smartphone via the Smart Life or Tuya Smart app, regardless of your location. The app also provides low battery warnings.
Image 8.3: A smartphone displaying a real-time smoke alarm notification from the connected app.
9. Maintenance
9.1 Cleaning
Clean your smoke detector at least once a month. Use a soft, damp cloth to wipe the exterior. Do not use cleaning solvents or spray directly onto the device. Gently vacuum around the smoke inlets to remove dust and debris.
9.2 Battery Replacement
The detector is equipped with a 10-year replaceable CR123A lithium battery. When the battery is low, the device will emit a chirp and send a notification to your app. Replace the battery immediately:
- Twist the detector counter-clockwise to remove it from its mounting bracket.
- Open the back cover.
- Remove the old CR123A battery and insert a new one, ensuring correct polarity.
- Close the back cover and re-attach the detector to its mounting bracket.
- Test the alarm after replacing the battery.
Image 9.1: Close-up of the smoke detector showing its smoke inlets and the replaceable CR123A battery compartment.
10. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Alarm chirps periodically | Low battery warning | Replace the CR123A battery immediately. |
| False alarms | Steam, cooking fumes, dust, high humidity | Relocate the detector away from sources of false alarms. Clean the detector regularly. |
| No app notifications | Wi-Fi disconnected, app permissions, offline notification disabled | Check Wi-Fi connection (2.4GHz only). Ensure app notifications are enabled in phone settings. Verify "Offline Notification" is enabled in the app. |
| Device offline in app | Wi-Fi signal loss, battery depleted | Check your Wi-Fi router and signal strength. Replace battery if low. |
| Alarm does not sound during test | Battery issue, device malfunction | Ensure battery is correctly installed and charged. If problem persists, contact customer support. |
11. Specifications
| Attribute | Specification |
|---|---|
| Brand | Soewolit |
| Model Number | SO507YW |
| Power Source | Battery Powered (CR123A Lithium Battery) |
| Battery Life | Up to 10 years (replaceable) |
| Alarm Loudness | 85dB |
| Sensor Type | Photoelectric |
| Connectivity | 2.4GHz Wi-Fi |
| App Compatibility | Smart Life, Tuya Smart |
| Product Dimensions | 3"D x 3"W x 2.2"H (approx. 7.8cm x 7.8cm x 5.7cm) |
| Item Weight | 3.2 ounces (approx. 90g) |
12. Important Safety Information
- This smoke detector is designed for indoor use only.
- Do not paint the detector. Paint may clog the openings and interfere with the sensor's ability to detect smoke.
- Do not install near sources of combustion, high heat, or excessive moisture.
- Test the smoke detector weekly to ensure proper operation.
- In case of an actual fire, evacuate the premises immediately and call emergency services. Do not attempt to fight a large fire yourself.
- Keep out of reach of children.
13. Warranty and Support
For warranty information or technical support, please refer to the product packaging or contact Soewolit customer service directly. Contact details can typically be found on the manufacturer's website or through your purchase platform.