Instruction Manual for Kenmore Washer Replacement Rings

1. Introduction

This manual provides essential information for the installation and maintenance of your new replacement rings for Kenmore washing machines. These rings are designed to replace original components, ensuring proper function and stability within your appliance. Please read this manual thoroughly before attempting any installation.

2. Product Overview and Package Contents

Your package includes one (1) replacement ring, as depicted below. This ring is an aftermarket component designed for specific Kenmore washer models.

This image displays the two types of metal rings that may be included in the package, designed as replacement parts for Kenmore washing machines. One ring is an open C-shape, and the other is a C-shape with a small hook at one end. The specific ring included will match the product description.

• 1x Replacement Ring (as pictured)

3. Compatibility

These replacement rings are compatible with various Kenmore washer models. Please verify your washer's model number against the list below to ensure proper fit.

Compatible Kenmore Washer Models:

• 11092593410
• 11092593420
• 11092595210
• 11092595410
• 11092595510
• 11092596100
• 11092597200
• 11092597210
• 11092597400
• 11092597410
• 11092598200
• 11092598400
• 11092599200
• 11092599400
• 11092599500
• 11094519100
• 11094519800
• 11094570100
• 11094570800
• 7MDKL1301WQ0
• 7MDKL1401WQ0

To quickly find your model number, use the "Ctrl + F" (or "Command + F" on Mac) function in your browser and type your model number into the search bar.

4. Installation Instructions

These rings are typically used as retaining clips or fasteners within the washing machine assembly. Installation generally involves replacing an existing worn or broken ring. Due to the variety of Kenmore washer models and the specific location where this ring may be used, detailed step-by-step instructions for every scenario cannot be provided.

General Installation Guidance:

1. Safety First: Always unplug your washing machine from the power outlet and turn off the water supply before attempting any repairs or installations.
2. Identify the Location: Determine where the old ring is located within your washer that needs replacement. This may require consulting your washer's original service manual or diagrams.
3. Remove Old Ring: Carefully remove the old or broken ring. Depending on the type of ring (e.g., C-clip, E-clip, retaining ring), specialized tools like snap ring pliers may be required.
4. Install New Ring: Position the new replacement ring in the correct groove or slot. Ensure it is fully seated and securely fastened to prevent dislodgement during operation. Apply gentle, even pressure.
5. Reassemble: Reassemble any components that were removed to access the ring.
6. Test: Once fully reassembled, restore power and water supply, then perform a test cycle to ensure proper operation and that the new ring holds its position.

Note: If you are unsure about the installation process or lack the necessary tools, it is highly recommended to consult a qualified appliance repair technician. Improper installation can lead to further damage to your appliance.

5. Maintenance

These replacement rings are designed for durability and typically require minimal maintenance once installed correctly. Periodically, during other washer maintenance or inspections, you may:

• Inspect for Wear: Visually inspect the ring for any signs of corrosion, bending, or deformation.
• Ensure Secure Fit: Confirm that the ring remains securely in its position and has not become loose.

6. Troubleshooting

If you encounter issues after installing the replacement ring, consider the following:

• Part Does Not Fit: Double-check your washer's model number against the compatibility list in Section 3. Ensure you have the correct replacement part.
• Washer Malfunction Continues: If the original issue with your washer persists after replacing the ring, the problem may lie with a different component.
• Ring Dislodges: Ensure the ring was fully seated and properly installed. Verify that the groove or pin it attaches to is not damaged.

For persistent issues or if you are unsure about the cause of a problem, it is advisable to contact a professional appliance repair service.

7. Specifications

8. Support and Contact Information

If you have questions regarding the compatibility of this replacement ring with your specific Kenmore washer model, or if you require further assistance, please contact the seller directly.

The seller aims to resolve any issues or inquiries within 24 hours.